HUAWEI-TDMCPE-MIB Table View

This table describes the reference information about 
a TDM modem tftp status. This information describe 
the TFTP server IP address, the file name, the TFTP 
command and TFTP status.The index of this table is ifIndex.

This table describes the reference information about a 
TDM modem system information. This information describe 
the maximum rate, the PSD type, the interface type of the 
DTE port, the modem wiring, the actual ASMi52 type, the 
modem hardware version, the modem software version, IP 
address and MAC address.The index of this table is ifIndex.

This table describes the reference information about a TDM 
Modem configuration that may be used with G.SHDSL modem for 
configuration. This information describe the alarm report 
mask, the port status report mask, the reset command, the 
switch to clear the alarm buffer, the switch to clear 
statistics of the selected port, test time out and test command.
The index of this table is ifIndex.

This table describes the reference information about 
a TDM Modem alarm buffer that may be used for NMS polling. 
This information describe the alarm buffer index, the 
status of the alarm and severity of the alarm.The indexes 
of this table are ifIndex, hwTdmModemAlarmBufIndex.

This table describes the information about a TDM Modem SHDSL 
port configuration. This information describe the SHDSL port 
index, power backoff mode, worst case target SNR margin, 
current condition target SNR margin, PSD (Power Spectral 
Density) Mask, line probe mode, the loop attenuation alarm 
threshold, the SNR margin alarm threshold ,the line wiring,
the test timeout and test cmd.The index of this table is ifIndex.

This table describes the reference information about a 
TDM Modem E1 port configuration. This information describe 
the E1 port index, line type, sync, idelcode and crc4 value.
The index of this table is ifIndex.

This table describes the information about a TDM Modem DTE 
port configuration. This information describe the DTE port 
index, local analog loop-back switch, remote loop-back 
switch, and Ir rate.The index of this table is ifIndex.

This table describes the reference information about a TDM Modem SHDSL port 
statistics including 15 minute and 1 day interval. This information describe
total elapsed seconds, the number of errored seconds, the number of unavailable
seconds, the number of severely errored seconds, the number of CRC anomalies, 
the number of loss of sync word seconds.
The indexes of this table are ifIndex, hwTdmShdslLineIndex.

This table describes the reference information about a TDM Modem SHDSL port statistics 
in 15 minute interval. This information describe the SHDSL port interval index, the number 
of errored seconds, the number of unavailable seconds, the number of severely errored 
seconds, the number of CRC anomalies and the number of loss of sync word seconds.
The indexes of this table are ifIndex, hwTdmShdslLineIndex, hwTdmShdslIntervalIndex.

This table describes the reference information about a TDM Modem SHDSL port statistics 
in 1-day interval. This information describe the SHDSL port interval index, the number 
of errored seconds, the number of unavailable seconds, the number of severely errored 
seconds, the number of CRC anomalies and the number of loss of sync word seconds.
The indexes of this table are ifIndex, hwTdmShdslLineIndex, hwTdmShdslTotalIndex.

This table describes the reference 
information about a TDM Modem E1 port statistics in current 15 minute interval. 
This information describe the E1 port current interval index, the number of 
BPV (BiPolar Violation) events detected during the last minute, the maximal 
number of BPV (BiPolar Violation) events (per minute) detected during the worst 
minute, the number of CRC error events, the average number of CRC error events 
per second, the number of errored seconds, the number of unavailable seconds,
the number of severely errored seconds, the number of bursty errored seconds, 
the number of loss of frame events, the number of controlled slip seconds, the 
number of degraded minutes and the number of seconds that have elapsed since the 
beginning of the near end current error- measurement period.
The index of this table is ifIndex.

This table describes the reference information about a TDM Modem E1 
port statistics in 15 minute interval. This information describe the 
E1 port interval index, the number of errored seconds, the number of 
unavailable seconds, the number of severely errored seconds, the number 
of bursty errored seconds, the number of loss of frame events, the number 
of controlled slip seconds and the number of degraded minutes.The indexes 
of this table are ifIndex, hwTdmE1IntervalIndex.

This table describes the configuration about a TDM Modem 
to config TDM SHDSL terminal.The index of this table is ifIndex.