HUAWEI-OSPFV2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
93

hwOspfv2ProcessTable

table
.1.3.6.1.4.1.2011.5.25.155.3 · 1 row entry · 33 columns
Open in standard view 
Information describes the configured parameters of the router's attached OSPF processes.
hwOspfv2ProcessEntry entry .1.3.6.1.4.1.2011.5.25.155.3.1
Information describes the configured parameters of the router's attached OSPF processes.
Indexes
hwOspfv2ProcessIdIndex
Column Syntax OID
hwOspfv2ProcessIdIndex
The process ID indicates the OSPF process number. The value ranges from 1 to 4294967295.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.155.3.1.1
hwOspfv2VpnName
The name of VPN instance to which the process belongs.
The process instance needs to be specified when the process is created,
and then cannot be changed.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.155.3.1.2
hwOspfv2ConfigRouterId
A 32-bit integer uniquely identifies the router in the Autonomous System.
OSPF private router ID can be configured through this node. The default
value is 0.0.0.0. If the value of this node is 0.0.0.0, it means that no…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.155.3.1.3
hwOspfv2ActualRouterId
This node is used to get actual router ID of process and it is a read-only node. If the node hwOspfv2ConfigRouterId is not set, the actual router ID should default to the value of one of the router's IP interface addres…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.155.3.1.4
hwOspfv2BandwidthReference
The reference value that is used to calculate the link cost.
If there is no explicit link cost, OSPF calculates the cost according to the
bandwidth of the link (cost = reference value (M)/bandwidth).
Mbit/sSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.155.3.1.5
hwOspfv2Description
The description of the OSPF process.
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.2011.5.25.155.3.1.6
hwOspfv2LsaArriveIntvl
To avoid wasting network resources due to network changes, OSPF defines that the
interval for receiving LSAs is 1 second.
In a stable network, if the fast speed of route convergence is required, you can
cancel the inter…
millionSecondInteger32r/w
Constraints:
range: -1-10000
 .1.3.6.1.4.1.2011.5.25.155.3.1.7
hwOspfv2LsaArriveMaxIntvl
This object indicates the maximum interval of intelligent-timer for receiving
OSPF LSAs. When hwOspfv2LsaArriveMaxIntvl is specified, you need also specify
hwOspfv2LsaArriveStartIntvl and hwOspfv2LsaArriveHoldIntvl, b…
millionSecondInteger32r/w
Constraints:
range: -1--1
range: 1-120000
 .1.3.6.1.4.1.2011.5.25.155.3.1.8
hwOspfv2LsaArriveStartIntvl
This object indicates the initial interval of intelligent-timer for receiving
OSPF LSAs. When hwOspfv2LsaArriveStartIntvl is specified, you need also specify
hwOspfv2LsaArriveMaxIntvl and hwOspfv2LsaArriveHoldIntvl, bu…
millionSecondInteger32r/w
Constraints:
range: -1-60000
 .1.3.6.1.4.1.2011.5.25.155.3.1.9
hwOspfv2LsaArriveHoldIntvl
This object indicates the Holdtime interval of intelligent-timer for receiving
OSPF LSAs. After an intelligent timer is enabled, the interval for receiving
LSAs is as follows: The initial interval for receiving LSAs i…
millionSecondInteger32r/w
Constraints:
range: -1--1
range: 1-60000
 .1.3.6.1.4.1.2011.5.25.155.3.1.10
hwOspfv2LsaOrigIntvl
To avoid wasting network source due to network changes, OSPF defines that the
interval for updating LSAs is 5 seconds.
In a stable network, if the speed of route convergence is required to be fast,
you can cancel the i…
millionSecondInteger32r/w
Constraints:
range: -1-0
 .1.3.6.1.4.1.2011.5.25.155.3.1.11
hwOspfv2LsaOrigMaxIntvl
This object indicates the maximum interval of intelligent-timer for updating
OSPF LSAs. When hwOspfv2LsaOrigMaxIntvl is specified, you need also specify
hwOspfv2LsaOrigStartIntvl and hwOspfv2LsaOrigHoldIntvl, but you c…
millionSecondInteger32r/w
Constraints:
range: -1--1
range: 1-120000
 .1.3.6.1.4.1.2011.5.25.155.3.1.12
hwOspfv2LsaOrigStartIntvl
This object indicates the initial interval of intelligent-timer for updating
OSPF LSAs. When hwOspfv2LsaOrigStartIntvl is specified, you need also specify
hwOspfv2LsaOrigMaxIntvl and hwOspfv2LsaOrigHoldIntvl, but you ca…
millionSecondInteger32r/w
Constraints:
range: -1-60000
 .1.3.6.1.4.1.2011.5.25.155.3.1.13
hwOspfv2LsaOrigHoldIntvl
This object indicates the Holdtime interval of intelligent-timer for updating
OSPF LSAs. After an intelligent timer is enabled, the interval for updating
LSAs is as follows: The initial interval for updating LSAs is s…
millionSecondInteger32r/w
Constraints:
range: -1--1
range: 1-60000
 .1.3.6.1.4.1.2011.5.25.155.3.1.14
hwOspfv2LsaOrigIntvlOtherType
This object indicates the interval for updating LSAs, excluding OSPF router
LSAs and network LSAs. hwOspfv2LsaOrigIntvlOtherType and hwOspfv2LsaOrigIntvl
cannot be specified together. Here -1 indicated that hwOspfv2Ls…
secondInteger32r/w
Constraints:
range: -1-10
 .1.3.6.1.4.1.2011.5.25.155.3.1.15
hwOspfv2LsdbOverflowLimit
The maximum number of external LSAs in OSPF LSDB.
When this node is set to 0, it means that no limits exist.
Integer32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.2011.5.25.155.3.1.16
hwOspfv2MaxLoadBalaNumber
The maximum number of equal-cost routes to a destination in the routing table.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.155.3.1.17
hwOspfv2AseRouteMaxNumber
The maximum number of ASE routes that are supported by OSPF.
Integer32r/w
Constraints:
range: 100-5000000
 .1.3.6.1.4.1.2011.5.25.155.3.1.18
hwOspfv2InterRouteMaxNumber
The maximum number of inter-area routes that are supported by OSPF.
Integer32r/w
Constraints:
range: 100-1000000
 .1.3.6.1.4.1.2011.5.25.155.3.1.19
hwOspfv2IntraRouteMaxNumber
The maximum number of intra-area routes that are supported by OSPF.
Integer32r/w
Constraints:
range: 100-100000
 .1.3.6.1.4.1.2011.5.25.155.3.1.20
hwOspfv2RetransLimitMaxNumber
The maximum count of retransmission. The value is an integer that ranges from 2 to 255.
When the retransmission limit is disabled, the value is set to 0.
Integer32r/w
Constraints:
range: 0-0
range: 2-255
 .1.3.6.1.4.1.2011.5.25.155.3.1.21
hwOspfv2Rfc1583Compatibility
It is used to enable the routing rule for compatible RFC 1583.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.155.3.1.22
hwOspfv2ShamHello
It is used to enable the sham-hello feature of OSPF.
After the feature is enabled, OSPF updates the timeout timer of the neighbor when
receiving protocol packets of various types.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.155.3.1.23
hwOspfv2SpfSchIntvlUnit
The value of the object identifies the interval unit for OSPF to calculate
routes. This object must be specified together with hwOspfv2SpfSchIntervalNumber.
By default, this object is none, indicating that an intelli…
Enumerationr/w
Enumerated Values:
1second
2millionSecond
3none
 .1.3.6.1.4.1.2011.5.25.155.3.1.24
hwOspfv2SpfSchIntvlNumber
The value of the object identifies the interval for OSPF to calculate routes.
This object must be specified together with hwOspfv2SpfSchIntervalUnit. By
default, this object is -1, indicating that an intelligent timer…
Integer32r/w
Constraints:
range: -1-10000
 .1.3.6.1.4.1.2011.5.25.155.3.1.25
hwOspfv2SpfSchMaxIntvl
This object indicates the maximum interval of intelligent timer for OSPF to
perform the SPF calculation. When hwOspfv2SpfSchMaxIntvl is specified, you
need also specify hwOspfv2SpfSchStartIntvl and hwOspfv2SpfSchHoldI…
millionSecondInteger32r/w
Constraints:
range: -1--1
range: 1-120000
 .1.3.6.1.4.1.2011.5.25.155.3.1.26
hwOspfv2SpfSchStartIntvl
This object indicates the initial interval of intelligent timer for OSPF to
perform the SPF calculation. When hwOspfv2SpfSchStartIntvl is specified, you
need also specify hwOspfv2SpfSchMaxIntvl and hwOspfv2SpfSchHoldI…
millionSecondInteger32r/w
Constraints:
range: -1--1
range: 1-60000
 .1.3.6.1.4.1.2011.5.25.155.3.1.27
hwOspfv2SpfSchHoldIntvl
This object indicates the Holdtime interval of intelligent timer for OSPF to
perform the SPF calculation. After an intelligent timer is enabled, the
interval for the SPF calculation is as follows: The initial interval…
millionSecondInteger32r/w
Constraints:
range: -1--1
range: 1-60000
 .1.3.6.1.4.1.2011.5.25.155.3.1.28
hwOspfv2OpaqueCapability
It is used to enable opaque-LSAs capability. When the capability is enabled,
then the OSPF process can generate opaque LSAs and process the opaque LSAs
received from neighbors.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.155.3.1.29
hwOspfv2TrafficAdjustment
It is used to enable IGP-shortcut feature. The value false means disable.
Otherwise, the value true means enable. If you want to set this node to false,
please check whether Local MT feature is disabled. When Local MT…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.155.3.1.30
hwOspfv2TrafficAdvertise
It is used to enable IGP-shortcut and Forwarding Adjacency feature.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.155.3.1.31
hwOspfv2FlushTimer
The value of the flush timer. When configuring or undoing OSPF process,
flush self-originated LSAs first.
If the timer expires, stop flushing LSAs, and then reset the process.
This timer is one-off. When flushing is fi…
Integer32r/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.2011.5.25.155.3.1.32
hwOspfv2ProcessRowStatus
This node is used to create and destroy rows.
Because CreateAndWait is not supported, you can set this node to CreatAndGo
to create a new process. If the process is created successfully, the value of
this node changes t…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.155.3.1.33

hwOspfv2AreaTable

table
.1.3.6.1.4.1.2011.5.25.155.4 · 1 row entry · 28 columns
Open in standard view 
Information describes the configured parameters of the router's attached OSPF areas.
hwOspfv2AreaEntry entry .1.3.6.1.4.1.2011.5.25.155.4.1
Information describes the configured parameters of the router's attached OSPF areas.
Indexes
hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex
Column Syntax OID
hwOspfv2AreaIdIndex
A 32-bit integer uniquely identifies an area. Area ID 0.0.0.0 is used for the OSPF backbone.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.155.4.1.1
hwOspfv2AreaType
Specify the type of area: nssa(1), stub(2), normal(3).
Enumerationr/w
Enumerated Values:
1nssa
2stub
3normal
 .1.3.6.1.4.1.2011.5.25.155.4.1.2
hwOspfv2AreaNoSummary
This node is used to reduce the number of LSAs that are transmitted to the NSSA
or Stub area. You can configure this node as an ABR. This also prevents the ABR
from transmitting Summary LSA (Type-3 LSA) to the NSSA or S…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.155.4.1.3
hwOspfv2AreaNssaFlushTimer
The value of the flush timer. When configuring or undoing NSSA feature, flush self-originated
Type-5 and Type-7 LSAs first.
If the timer expires, stop flushing LSAs, and then reset the area.
This timer is one-off. When …
Integer32r/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.2011.5.25.155.4.1.4
hwOspfv2AreaNssaDefAdvertise
This node is used to decide whether default Type-7 LSAs should be originated.
When this node is set to true, for ABR router it must originate Type-7 LSAs, while for ASBR
router only if the route to 0.0.0.0 exists, it sh…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.155.4.1.5
hwOspfv2AreaNssaNoImportRoute
This node is used to decide whether the external route is imported to NSSA area. On ASBR,
if this node is set to true, the external route cannot be advertised to the NSSA area.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.155.4.1.6
hwOspfv2AreaNssaTransAlways
This node specifies whether or not an NSSA router will unconditionally translate Type-7
LSAs to Type-5 LSAs when acting as an NSSA border router.
When hwOspfAreaNssaTranslateAlways is set to true, Type-7 LSAs are always…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.155.4.1.7
hwOspfv2AreaNssaTransTimer
This node is used to configure translator stability interval.
This minimizes excessive flushing of translated Type-7 LSAs and provides a more stable
translator transition.
If the area type is not NSSA, the default valu…
Integer32r/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.2011.5.25.155.4.1.8
hwOspfv2AreaNssaAllowFaZero
When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero
when the router generates Type-7 LSAs.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.155.4.1.9
hwOspfv2AreaNssaSuppressFa
When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero
when the ABR translates Type-7 LSAs into Type-5 LSAs.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.155.4.1.10
hwOspfv2AreaNssaSetNBit
When this node is set to true, N-bit should be set in the option when sending DD packets.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.155.4.1.11
hwOspfv2AreaDefCost
This node is used to specify the cost of the default routes that flush to stub area by the ABR.
The value ranges from 0 to 16777214. The default value is -1.
Integer32r/w
Constraints:
range: -1-16777214
 .1.3.6.1.4.1.2011.5.25.155.4.1.12
hwOspfv2AreaDescription
This node is used to specify the description of the area.
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.2011.5.25.155.4.1.13
hwOspfv2AreaFilterExpAcl
This object indicates the number of basic ACL.
The ACL number ranges from 2000 to 2999.
The default value is 0, indicating no configuration.
The object is used to filter the Summary LSAs that leave the area.
It is inco…
Integer32r/w
Constraints:
range: 0-0
range: 2000-2999
 .1.3.6.1.4.1.2011.5.25.155.4.1.14
hwOspfv2AreaFilterExpPrefix
This object indicates the name of the address prefix list.
The name is a string of 1 to 169 characters.
The object is used to filter the Summary LSAs that leave the area.
It is incompatible with hwOspfv2AreaFilterExpAc…
OctetStringr/w
Constraints:
range: 0-169
 .1.3.6.1.4.1.2011.5.25.155.4.1.15
hwOspfv2AreaFilterExpPolicy
This object indicates the name of the routing policy.
The name is a string of 1 to 200 characters.
The object is used to filter the Summary LSAs that leave the area.
It is incompatible with hwOspfv2AreaFilterExpAcl, hw…
OctetStringr/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.2011.5.25.155.4.1.16
hwOspfv2AreaFilterImpAcl
This object indicates the number of basic ACL. The value ranges from 2000 to 2999.
The default value is 0, indicating no configuration.
The object is used to filter the Summary LSAs that enter the area.
It is incompati…
Integer32r/w
Constraints:
range: 0-0
range: 2000-2999
 .1.3.6.1.4.1.2011.5.25.155.4.1.17
hwOspfv2AreaFilterImpPrefix
This object indicates the name of the address prefix list.
The name is a string of 1 to 169 characters.
The object is used to filter the Summary LSAs that enter the area.
It is incompatible with hwOspfv2AreaFilterImpAc…
OctetStringr/w
Constraints:
range: 0-169
 .1.3.6.1.4.1.2011.5.25.155.4.1.18
hwOspfv2AreaFilterImpPolicy
This object indicates the name of the routing policy.
The name is a string of 1 to 200 characters.
The object is used to filter the Summary LSAs that enter the area.
It is incompatible with hwOspfv2AreaFilterImpAcl, hw…
OctetStringr/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.2011.5.25.155.4.1.19
hwOspfv2AreaAuthModeType
The type of the OSPF area authentication mode.
none(1): not configured.
simple(2): indicates the simple authentication mode.
md5(3): indicates the md5 cipher mode.
hmd5(4): indicates the hmac-md5 cipher mode.
keychain(5…
Enumerationr/w
Enumerated Values:
1none
2simple
3md5
4hmd5
5keychain
6hmacSha256
 .1.3.6.1.4.1.2011.5.25.155.4.1.20
hwOspfv2AreaAuthPasswordType
Specify the type of area authentication key.
plaintext(2): If this node is set to plaintext(2), you can specify only the plain text
authentication key on the node hwOspfAreaAuthText. When viewing the configuration file,…
Enumerationr/w
Enumerated Values:
1none
2plainText
3cipherText
 .1.3.6.1.4.1.2011.5.25.155.4.1.21
hwOspfv2AreaAuthKeyId
Specify the authentication key ID for MD5 or HMAC-MD5 authentication mode.
The value of the ID is an integer that ranges from 1 to 255. The default value 0 means
no configuration.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.155.4.1.22
hwOspfv2AreaAuthText
In simple authentication, this object indicates the authentication key.
It's a string of 1 to 8 characters in plain text or 24 characters in cipher text.
In MD5 or HMAC-MD5 or HMAC-SHA256 authentication, this object a…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.155.4.1.23
hwOspfv2AreaMplsTe
The node is used to enable the MPLS-TE capability.
disable(1): no configuration.
stdEnable(2): accepts only the LSAs in the standard format. That is, an LSA is rejected
if it has more than one Top level TLV.
stdDisable(…
Enumerationr/w
Enumerated Values:
1disable
2stdEnable
3stdDisable
 .1.3.6.1.4.1.2011.5.25.155.4.1.24
hwOspfv2AreaAreaRowStatus
This node is used to create and destroy rows.
Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new
area. If the area is created successfully, the value of this node changes to acti…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.155.4.1.25
hwOspfv2AreaFilterExpAclName
This object indicates the ACL name. Note that the ACL can only be used as basic ACL.
The object is used to filter the Summary LSAs that leave the area.
It is incompatible with hwOspfv2AreaFilterExpAcl, hwOspfv2AreaFilte…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.155.4.1.26
hwOspfv2AreaFilterImpAclName
This object indicates the ACL name. Note that the ACL can only be used as basic ACL.
The object is used to filter the Summary LSAs that enter the area.
It is incompatible with hwOspfv2AreaFilterImpAcl, hwOspfv2AreaFilte…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.155.4.1.27
hwOspfv2AreaAuthKeychName
This object indicates the keychain name. It's a string of 1 to 47 characters.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.155.4.1.28

hwOspfv2NetworkTable

table
.1.3.6.1.4.1.2011.5.25.155.5 · 1 row entry · 3 columns
Open in standard view 
Information describes the configured parameters of the router's attached OSPF networks.
hwOspfv2NetworkEntry entry .1.3.6.1.4.1.2011.5.25.155.5.1
Information describes the configured parameters of the router's attached OSPF networks.
Indexes
hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex hwOspfv2NetworkIpAddrIndex hwOspfv2NetworkIpMaskIndex
Column Syntax OID
hwOspfv2NetworkIpAddrIndex
Network IP address: specifies the address of the network segment where the interface resides.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.155.5.1.1
hwOspfv2NetworkIpMaskIndex
Network IP mask: specifies the wildcard mask of an IP address, which is similar to the
reversed form of the mask of an IP address.
'1' represents that the corresponding bit in the IP address is ignored and '0' represent…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.155.5.1.2
hwOspfv2NetworkRowStatus
This node is used to create and destroy rows.
Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new
network. If the network is created successfully, the value of this node changes t…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.155.5.1.3

hwOspfv2NeighborTable

table
.1.3.6.1.4.1.2011.5.25.155.6 · 1 row entry · 16 columns
Open in standard view 
This object indicates the configured parameters of the OSPF neighbors attached to the router.
hwOspfv2NeighborEntry entry .1.3.6.1.4.1.2011.5.25.155.6.1
This object indicates the configured parameters of the OSPF neighbors attached to the router.
Indexes
hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex hwOspfv2SelfIfnetIndex hwOspfv2NbrIpAddrIndex
Column Syntax OID
hwOspfv2SelfIfnetIndex
This object indicates the unique value for each interface.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.5.25.155.6.1.1
hwOspfv2NbrIpAddrIndex
This object indicates the IP address of the OSPF neighbor.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.155.6.1.2
hwOspfv2SelfRouterId
This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. It is the router ID of itself.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.155.6.1.3
hwOspfv2SelfIfIpAddress
This object indicates the IP address of the OSPF interface associated with this neighbor.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.155.6.1.4
hwOspfv2SelfIfName
The name of the OSPF interface associated with this neighbor.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.155.6.1.5
hwOspfv2NbrIfDesignatedRouter
This object indicates the IP address of the designated router that is obtained from the DD packets
from this neighbor. By default, the value is '00000000'H.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.155.6.1.6
hwOspfv2NbrIfBackupDesignatedRouter
This object indicates the IP address of the backup designated router which is obtained from the
DD packets from this neighbor. By default, the value is '00000000'H.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.155.6.1.7
hwOspfv2NbrIfMtu
This object indicates the size of the largest IP datagram that can be sent out the sending interface
without fragmentation. It is obtained from the DD packets from this neighbor. By default, the value is 0.
The MTU of …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.155.6.1.8
hwOspfv2NbrRouterId
This object indicates the router ID of this neighbor.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.155.6.1.9
hwOspfv2NbrState
This object indicates the state of the relationship with this neighbor. By default, the state is down.
Enumeration
Enumerated Values:
1down
2attempt
3init
4twoWay
5exchangeStart
6exchange
7loading
8full
 .1.3.6.1.4.1.2011.5.25.155.6.1.10
hwOspfv2NbrMode
This object indicates whether this neighbor is master or slave through the DD negotiation.
Enumeration
Enumerated Values:
1master
2slave
 .1.3.6.1.4.1.2011.5.25.155.6.1.11
hwOspfv2NbrPriority
This object indicates the priority of this neighbor in the designated router election algorithm.
The value 0 signifies that the neighbor is not eligible to become the designated router on this
particular network. By …
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.155.6.1.12
hwOspfv2NbrUpTime
This object indicates the time (in seconds) since the state of this neighbor has been full.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.155.6.1.13
hwOspfv2NbrAuthSequence
This object indicates the unsigned 32-bit non-decreasing sequence number. Used to guard against replay attacks.
By default, the value is 0.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.155.6.1.14
hwOspfv2NbrDeadTimeLeft
This object indicates the period (in seconds) after which this neighbor is declared dead.
Unsigned32
Constraints:
range: 0-235926000
 .1.3.6.1.4.1.2011.5.25.155.6.1.15
hwOspfv2NbrGrStatus
This object indicates whether the neighbor performs GR or functions as a GR helper. By default, the state is normal.
Enumeration
Enumerated Values:
1normal
2doingGR
3helper
4notsupport
 .1.3.6.1.4.1.2011.5.25.155.6.1.16

hwOspfv2InterfaceTable

table
.1.3.6.1.4.1.2011.5.25.155.7 · 1 row entry · 3 columns
Open in standard view 
The Interface Table describes the interfaces from the viewpoint of OSPF.
hwOspfv2InterfaceEntry entry .1.3.6.1.4.1.2011.5.25.155.7.1
Information describes the configured parameters of the OSPF interfaces.
Indexes
hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex hwOspfv2InterfaceIndex
Column Syntax OID
hwOspfv2InterfaceIndex
A unique value for each interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.155.7.1.1
hwOspfv2InterfaceName
The name of the OSPF interface.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.155.7.1.2
hwOspfv2IntfAuthModeType
The type of the OSPF interface authentication mode.
none(1): not configured.
simple(2): indicates the simple authentication mode.
md5(3): indicates the md5 cipher mode.
hmd5(4): indicates the hmac-md5 cipher mode.
keych…
Enumerationr/w
Enumerated Values:
1none
2simple
3md5
4hmd5
5keychain
6hmacSha256
7null
 .1.3.6.1.4.1.2011.5.25.155.7.1.3

hwOspfv2VLinkTable

table
.1.3.6.1.4.1.2011.5.25.155.8 · 1 row entry · 2 columns
Open in standard view 
Information describes the configured parameters of the router's attached OSPF area vlink.
hwOspfv2VLinkEntry entry .1.3.6.1.4.1.2011.5.25.155.8.1
Information describes the configured parameters of the router's attached OSPF areas.
Indexes
hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex hwOspfv2NbrIdIndex
Column Syntax OID
hwOspfv2NbrIdIndex
A 32-bit integer uniquely identifies an virtual link peer.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.155.8.1.1
hwOspfv2VLinkAuthModeType
The type of the OSPF area authentication mode.
none(1): not configured.
simple(2): indicates the simple authentication mode.
md5(3): indicates the md5 cipher mode.
hmd5(4): indicates the hmac-md5 cipher mode.
keychain(5…
Enumerationr/w
Enumerated Values:
1none
2simple
3md5
4hmd5
5keychain
6hmacSha256
7null
 .1.3.6.1.4.1.2011.5.25.155.8.1.2

hwOspfv2ProcessStatisticTable

table
.1.3.6.1.4.1.2011.5.25.155.33.1 · 1 row entry · 6 columns
Open in standard view 
Information describes the statistics of the router's attached OSPF processes.
hwOspfv2ProcessStatisticEntry entry .1.3.6.1.4.1.2011.5.25.155.33.1.1
Information describes the statistics of the router's attached OSPF processes.
Indexes
hwOspfv2ProcessIdIndex
Column Syntax OID
hwospfv2ProcessPeerNumber
The peer number of OSPF process.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.155.33.1.1.1
hwospfv2ProcessFullPeerNumber
The value of this object identifies the number of neighbors in full state in the OSPF process.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.155.33.1.1.2
hwospfv2ProcessPeerUpCount
The value of this object identifies the number of neighbors in Up state in the OSPF process.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.155.33.1.1.3
hwospfv2ProcessPeerDownCount
The value of this object identifies the number of neighbors in Down state in the OSPF process.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.155.33.1.1.4
hwospfv2ProcessSendLsaNumber
The lsa send number of OSPF process.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.155.33.1.1.5
hwospfv2ProcessReceiveLsaNumber
The lsa receive number of OSPF process.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.155.33.1.1.6

hwOspfv2InterfaceStatisticTable

table
.1.3.6.1.4.1.2011.5.25.155.33.2 · 1 row entry · 2 columns
Open in standard view 
Information describes the statistics of the router's attached OSPF interfaces.
hwOspfv2InterfaceStatisticEntry entry .1.3.6.1.4.1.2011.5.25.155.33.2.1
Information describes the statistics of the router's attached OSPF interfaces.
Indexes
hwOspfv2ProcessIdIndex hwOspfv2AreaIdIndex hwOspfv2InterfaceIndex
Column Syntax OID
hwospfv2InterfacePeerUpCount
The value of this object identifies the number of neighbors in Up state on the OSPF interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.155.33.2.1.1
hwospfv2InterfacePeerDownCount
The value of this object identifies the number of neighbors in Down state on the OSPF interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.155.33.2.1.2