hwOspfv2AreaNssaDefAdvertise
HUAWEI-OSPFV2-MIB ·
.1.3.6.1.4.1.2011.5.25.155.4.1.5
Object
This node is used to decide whether default Type-7 LSAs should be originated. When this node is set to true, for ABR router it must originate Type-7 LSAs, while for ASBR router only if the route to 0.0.0.0 exists, it should originate Type-7 LSAs.
Context
- MIB
- HUAWEI-OSPFV2-MIB
- OID
.1.3.6.1.4.1.2011.5.25.155.4.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwOspfv2AreaEntry
- Table
- hwOspfv2AreaTable
- Siblings
- 27
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwOspfv2AreaIdIndex A 32-bit integer uniquely identifies an area. Area ID 0.0.0.0 is used for the OSPF backbone. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.155.4.1.1 |
| hwOspfv2AreaNssaSuppressFa When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero
when the ABR translates Type-7 LSAs into Type-5 LSAs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.155.4.1.10 |
| hwOspfv2AreaNssaSetNBit When this node is set to true, N-bit should be set in the option when sending DD packets. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.155.4.1.11 |
| hwOspfv2AreaDefCost This node is used to specify the cost of the default routes that flush to stub area by the ABR.
The value ranges from 0 to 16777214. The default value is -1. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.155.4.1.12 |
| hwOspfv2AreaDescription This node is used to specify the description of the area. | column | OctetString | .1.3.6.1.4.1.2011.5.25.155.4.1.13 |
| hwOspfv2AreaFilterExpAcl This object indicates the number of basic ACL.
The ACL number ranges from 2000 to 2999.
The default value is 0, indicating no configuration.
The object is used to filter the Summ… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.155.4.1.14 |
| hwOspfv2AreaFilterExpPrefix This object indicates the name of the address prefix list.
The name is a string of 1 to 169 characters.
The object is used to filter the Summary LSAs that leave the area.
It is i… | column | OctetString | .1.3.6.1.4.1.2011.5.25.155.4.1.15 |
| hwOspfv2AreaFilterExpPolicy This object indicates the name of the routing policy.
The name is a string of 1 to 200 characters.
The object is used to filter the Summary LSAs that leave the area.
It is incomp… | column | OctetString | .1.3.6.1.4.1.2011.5.25.155.4.1.16 |
| hwOspfv2AreaFilterImpAcl This object indicates the number of basic ACL. The value ranges from 2000 to 2999.
The default value is 0, indicating no configuration.
The object is used to filter the Summary L… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.155.4.1.17 |
| hwOspfv2AreaFilterImpPrefix This object indicates the name of the address prefix list.
The name is a string of 1 to 169 characters.
The object is used to filter the Summary LSAs that enter the area.
It is i… | column | OctetString | .1.3.6.1.4.1.2011.5.25.155.4.1.18 |
| hwOspfv2AreaFilterImpPolicy This object indicates the name of the routing policy.
The name is a string of 1 to 200 characters.
The object is used to filter the Summary LSAs that enter the area.
It is incomp… | column | OctetString | .1.3.6.1.4.1.2011.5.25.155.4.1.19 |
| hwOspfv2AreaType Specify the type of area: nssa(1), stub(2), normal(3). | column | Enumeration | .1.3.6.1.4.1.2011.5.25.155.4.1.2 |
| hwOspfv2AreaAuthModeType The type of the OSPF area authentication mode.
none(1): not configured.
simple(2): indicates the simple authentication mode.
md5(3): indicates the md5 cipher mode.
hmd5(4): indica… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.155.4.1.20 |
| hwOspfv2AreaAuthPasswordType Specify the type of area authentication key.
plaintext(2): If this node is set to plaintext(2), you can specify only the plain text
authentication key on the node hwOspfAreaAuthTe… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.155.4.1.21 |
| hwOspfv2AreaAuthKeyId Specify the authentication key ID for MD5 or HMAC-MD5 authentication mode.
The value of the ID is an integer that ranges from 1 to 255. The default value 0 means
no configuration. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.155.4.1.22 |
| hwOspfv2AreaAuthText In simple authentication, this object indicates the authentication key.
It's a string of 1 to 8 characters in plain text or 24 characters in cipher text.
In MD5 or HMAC-MD5 or H… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.155.4.1.23 |
| hwOspfv2AreaMplsTe The node is used to enable the MPLS-TE capability.
disable(1): no configuration.
stdEnable(2): accepts only the LSAs in the standard format. That is, an LSA is rejected
if it has … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.155.4.1.24 |
| hwOspfv2AreaAreaRowStatus This node is used to create and destroy rows.
Because CreateAndWait is not supported, you can set this node to CreatAndGo to create a new
area. If the area is created successfully… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.155.4.1.25 |
| hwOspfv2AreaFilterExpAclName This object indicates the ACL name. Note that the ACL can only be used as basic ACL.
The object is used to filter the Summary LSAs that leave the area.
It is incompatible with hwO… | column | OctetString | .1.3.6.1.4.1.2011.5.25.155.4.1.26 |
| hwOspfv2AreaFilterImpAclName This object indicates the ACL name. Note that the ACL can only be used as basic ACL.
The object is used to filter the Summary LSAs that enter the area.
It is incompatible with hwO… | column | OctetString | .1.3.6.1.4.1.2011.5.25.155.4.1.27 |
| hwOspfv2AreaAuthKeychName This object indicates the keychain name. It's a string of 1 to 47 characters. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2011.5.25.155.4.1.28 |
| hwOspfv2AreaNoSummary This node is used to reduce the number of LSAs that are transmitted to the NSSA
or Stub area. You can configure this node as an ABR. This also prevents the ABR
from transmitting S… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.155.4.1.3 |
| hwOspfv2AreaNssaFlushTimer The value of the flush timer. When configuring or undoing NSSA feature, flush self-originated
Type-5 and Type-7 LSAs first.
If the timer expires, stop flushing LSAs, and then rese… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.155.4.1.4 |
| hwOspfv2AreaNssaNoImportRoute This node is used to decide whether the external route is imported to NSSA area. On ASBR,
if this node is set to true, the external route cannot be advertised to the NSSA area. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.155.4.1.6 |
| hwOspfv2AreaNssaTransAlways This node specifies whether or not an NSSA router will unconditionally translate Type-7
LSAs to Type-5 LSAs when acting as an NSSA border router.
When hwOspfAreaNssaTranslateAlway… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.155.4.1.7 |
| hwOspfv2AreaNssaTransTimer This node is used to configure translator stability interval.
This minimizes excessive flushing of translated Type-7 LSAs and provides a more stable
translator transition.
If the… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.155.4.1.8 |
| hwOspfv2AreaNssaAllowFaZero When this node is set to true, the forwarding address of Type-7 LSAs can be filled with zero
when the router generates Type-7 LSAs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.155.4.1.9 |