HUAWEI-BFD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
157

hwBfdIfConfTable

table
.1.3.6.1.4.1.2011.5.25.38.2.1 · 1 row entry · 7 columns
Open in standard view 
The interface configuration table of BFD.
hwBfdIfConfEntry entry .1.3.6.1.4.1.2011.5.25.38.2.1.1
The interface configuration table of BFD.
The index of this entry is hwBfdIfConfIndex.
Indexes
hwBfdIfConfIndex
Column Syntax OID
hwBfdIfConfIndex
It is the configuration index of this interface.
This index is automatically allocated inside the system
and is not user-configurable.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.5.25.38.2.1.1.1
hwBfdIfConfName
It is the name of this Interface.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.5.25.38.2.1.1.2
hwBfdIfConfEnable
The flag whether the interface has enabled BFD.
Options:
1. disable(0) -Indicates that the interface has disabled BFD
2. enable(1) -Indicates that the interface has enabled BFD
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.5.25.38.2.1.1.3
hwBfdIfConfDeleting
The flag that whether the interface is in deleting.
Options:
1. notDeleted(0) -the interface is not deleted
2. deleted(1) -the interface is deleted
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.5.25.38.2.1.1.4
hwBfdIfConfAvailable
The flag that whether the interface is available.
Options:
1. notAvailable(0) -the interface is not available
2. available(1) -the interface is available
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.5.25.38.2.1.1.5
hwBfdIfConfSessCnt
The number of sessions that has been bound to this interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.38.2.1.1.6
hwBfdIfConfRowStatus
Used to manage the creation and deletion of conceptual rows.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.38.2.1.1.7

hwBfdSessionConfTable

table
.1.3.6.1.4.1.2011.5.25.38.2.2 · 1 row entry · 54 columns
Open in standard view 
This table describes information about configuration entries of BFD sessions.
hwBfdSessionConfEntry entry .1.3.6.1.4.1.2011.5.25.38.2.2.1
BFD Session Configuration Table. Use this table to get/configure BFD sessions.
The index of this entry is hwBfdSessConfName.
Indexes
hwBfdSessConfName
Column Syntax OID
hwBfdSessConfName
It is the name of this configuration model.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.1
hwBfdSessConfMIndex
It is the configuration index of this session.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.2
hwBfdSessConfLocalDiscr
Define the local discriminator of the BFD session.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.3
hwBfdSessConfRemoteDiscr
Define the remote discriminator of the BFD session.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.4
hwBfdSessConfPeerAddr
Define the IP address of the peer in the BFD session.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.5
hwBfdSessConfBindIfIndex
It is the index of the binding interface in the BFD configuration.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.6
hwBfdSessConfBindIfName
It is the name of the binding interface in the BFD configuration.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.7
hwBfdSessConfDemandEnable
It is the flag of the BFD demand mode.
Options:
1. disabled(0) -disable the BFD demand mode
2. enabled(1) -enable the BFD demand mode
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.8
hwBfdSessConfDemandTimerInterval
Define the detecting interval in the BFD session with the demand mode.
Unit: millisecond
Unsigned32r/w
Constraints:
range: 500-300000
range: 0-0
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.9
hwBfdSessConfDetectMult
It is Detect time multiplier of the configuration. The
negotiated transmit interval, multiplied by this value,
provides the detection time for the transmitting
system in Asynchronous mode.
Unsigned32r/w
Constraints:
range: 3-50
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.10
hwBfdSessConfDesiredMinRxInterval
This is the minimum interval of the configuration, in
milliseconds, between received BFD Control packets
that this system is capable of supporting.
Unit: millisecond
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.11
hwBfdSessConfDesiredMinTxInterval
This is the minimum interval of the configuration,
in milliseconds, that the local system would
like to use when transmitting BFD Control packets.
Unit: millisecond
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.12
hwBfdSessConfWTRInterval
The wait-to-restore (WTR) time of the BFD session.
The event that indicates the session changing into the Up
state is reported to the application program only after
the WTR times out.
Unit: minute
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.13
hwBfdSessConfTOS
This is the TOS value of bfd packet.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.14
hwBfdSessConfPSTFlag
The PST flag of the BFD session configuration.
It indicates the status association between the current BFD
session and the interface bound to the session.
Options:
1. disabled(0) -indicates that the PST capability of…
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.15
hwBfdSessConfCommitFlag
It is the commit flag of the configuration entry.
Options:
1. notCommit(0) -not commit
2. commit(1) -commit
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.16
hwBfdSessConfAdminStatus
A BFD session can be administratively enabled or disabled.
The AdminStatus field indicates the BFD session status.
Options:
1. 0 -disable
2. 1 -enable
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.17
hwBfdSessConfRowStatus
Used to manage the creation and deletion of conceptual rows.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.18
hwBfdSessConfSourceAddr
Define the source IP address of the BFD session.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.19
hwBfdSessConfVrfIndex
The index of the VPN interface.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.20
hwBfdSessConfVPNName
The name of VPN interface.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.21
hwBfdSessConfDefaultIp
BFD session use default multicast IP as the detect peer-ip
Options:
1. no(1) -do not use the default multicast IP
2. yes(2) -use the default multicast IP
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.22
hwBfdSessConfPISFlag
The state of BFD session is associated with the state of the binding interface
Options:
1. false(1) -do not associate with interface state
2. true(2) -associate with interface state
3. subif(3) -associate with interfac…
Enumerationr/w
Enumerated Values:
1false
2true
3subif
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.23
hwBfdSessConfBindType
The binding type of the BFD session.
Options:
1. interfaceIp(1) -BFD for IP with peer-ip and interface
2. peerIp(2) -BFD for IP only with peer-ip
3. sourceIp(3) -BFD for IP with peer-ip and source-ip
4.…
Enumerationr/w
Enumerated Values:
1interfaceIp
2peerIp
3sourceIp
4ifAndSourceIp
5fec
6tunnelIf
7ospf
8isis
9ldpLsp
10staticLsp
11teLsp
12teTunnel
13pw
15vsiPw
21ldpTunnel
22bgpTunnel
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.24
hwBfdSessConfNextHop
It is the next hop of the BFD session.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.25
hwBfdSessConfStaticLspName
It is the static LSP name of the BFD session.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.26
hwBfdSessConfPWSecondaryFlag
The role of the PW bound with BFD session.
Options:
1. flagMasterPW(1) -master PW
2. flagSecondaryPW(2)-secondary PW
3. flagNoPW(3) -no PW
Enumerationr/w
Enumerated Values:
1flagMasterPW
2flagSecondaryPW
3flagNoPW
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.27
hwBfdSessConfTunnelDetectType
Set the failure notifies policy type.
Options:
1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down
2. flagNeighborDown(2) -notify applications only when detecting Neighbor-Down
Enumerationr/w
Enumerated Values:
1flagBothDown
2flagNeighborDown
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.28
hwBfdSessConfVcId
It is the ID of VC.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.29
hwBfdSessConfVsiName
It is the name of VSI.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.30
hwBfdSessConfVsiPeerAddr
It is the peer-ip of VSI.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.31
hwBfdSessConfDiscrAuto
Describe whether the discriminator can be auto allocated.
Options:
1. enabled(1) -the discriminator can be allocated automatically
2. disabled(2) -the discriminator cannot be allocated automatically
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.32
hwBfdSessConfPeerIpv6Addr
Define the peer IPv6 address of the BFD session.
IPV6-TCIpv6Addressr/w
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.33
hwBfdSessConfSourceIpv6Addr
Define the source IPv6 address of the BFD session.
IPV6-TCIpv6Addressr/w
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.34
hwBfdSessConfIpv6NextHop
It is the next hop of the BFD session.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.35
hwBfdSessConfIsIpv6Addr
Whether the peer address of the BFD session is IPv6 address.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.36
hwBfdSessConfKeychainName
Specify the name of the keychain for authentication.
OctetStringr/w
Constraints:
range: 1-47
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.37
hwBfdSessConfMeticulous
Whether enable meticulous authentication for SHA-1 type.
Options:
1. enabled(1) -enable meticulous authentication for SHA-1 type
2. disabled(2) -disabled meticulous authentication for SHA-1 type
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.38
hwBfdSessConfLooseAuthentication
Whether loose authentication check.
Options:
1.True(1) -loose-check
2.False(2) -do not loose-check
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.39
hwBfdSessConfOneArmEcho
The value of this object identifies whether a session works in one-arm-echo mode.
Options:
1. enabled(1) -indicates that the session works in one-arm-echo mode
2. disabled(2) -indicates that the session does not work i…
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.40
hwBfdSessConfMinEchoRxInterval
The value of this object identifies the minimum interval between received BFD
Control packets, in milliseconds.This value reflects the capability of receiving
BFD Control packets.
Unit: millisecond
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.41
hwBfdSessConfPWTtlMode
The value of this object identifies the configuration mode of a TTL used by
the BFD session for PW.
Options:
1. config(1) -indicates that the TTL is manually set
2. auto(2) -indicates that the TTL is automatically cal…
Enumerationr/w
Enumerated Values:
1config
2auto
3default
4none
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.42
hwBfdSessConfPWTtl
The value of this object identifies the TTL used by the BFD session for PW.
The vlaue is configurable only when the configuration mode of a TTL is config.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.43
hwBfdSessConfRemotePeerIpType
The value of this object identifies the type of the destination address of the BFD
session for PW.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.44
hwBfdSessConfRemotePeerIp
The value of this object identifies the destination IP address of the BFD session
for PW.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.45
hwBfdSessConfSelectBoard
This object indicates the main processing board of a BFD session.
OctetStringr/w
Constraints:
range: 1-47
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.46
hwBfdSessConfPWSPE
The value of this object identifies the node on which a BFD session is set up.
The values are as follows.
Options:
1. upe(1) -indicates that a BFD session is set up on a UPE to detect a PW
2. spe(2) -indicates that a …
Enumerationr/w
Enumerated Values:
1upe
2spe
3none
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.47
hwBfdSessConfPWTrackIfName
This object indicates the interface monitored by the BFD session for PW.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.48
hwBfdSessConfIsPWTrackIf
The value of this object identifies whether the BFD session for
PW monitors an interface. The values are as follows.
Options:
1. enabled(1) -enables the BFD session for PW to monitor the interface
2. disabled(2)-disable…
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.49
hwBfdSessConfEncapsulationType
The value of this object identifies the VC encapsulation type on an SPE.
The values are as follows:
fr
atm-aal5-sdu
atm-trans-cell
vlan
ethernet
hdlc
ppp
atm-nto1-vcc
atm-nto1-vpc
ip-layer2
atm-1to1-vcc
atm-1to1-vpc
atm…
OctetStringr/w
Constraints:
range: 1-63
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.50
hwBfdSessConfPEVid
The value of this object identifies the outer tag of a sub-interface
for QinQ VLAN tag termination or the VLAN ID of a sub-interface for
dot1q VLAN tag termination.
Unsigned32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.51
hwBfdSessConfCEVid
The value of this object identifies the inner tag in QinQ packets.
Unsigned32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.52
hwBfdSessConfTOSEx
This is the extended TOS value of bfd packet.
Integer32r/w
Constraints:
range: 255-255
range: 0-7
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.53
hwBfdSessConfbImpactFlag
BFD session impact interface when the device reboot
Options:
1. no(1) -do not impact interface when the device reboot
2. yes(2) -impact interface when the device reboot
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.2011.5.25.38.2.2.1.54

hwBfdSessionTable

table
.1.3.6.1.4.1.2011.5.25.38.2.3 · 1 row entry · 67 columns
Open in standard view 
This table describes the query items of BFD sessions.
hwBfdSessionEntry entry .1.3.6.1.4.1.2011.5.25.38.2.3.1
The BFD Session Table describes the BFD sessions.
The index of this entry is hwBfdSessIndex.
Indexes
hwBfdSessIndex
Column Syntax OID
hwBfdSessIndex
It is unique and the Index of this session.
This index is automatically allocated inside the system
and is not user-configurable.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.1
hwBfdSessMIndex
This value indicate the configuration has Main Index.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.2
hwBfdSessBindVRRP
Describe the capability of bound with VRRP for the BFD session.
Options:
1. notBind(0) -not bind
2. bind(1) -bind
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.3
hwBfdSessCfgName
This object indicates the name of a BFD session. Currently, this object is used only as the VB binding variable for alarms.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.4
hwBfdSessPeerAddr
This object indicates the destination IP address of a BFD session. Currently, this object is used only as the VB binding variable of the alarm.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.5
hwBfdSessBindIfIndex
This object indicates the index of the interface bound to a BFD session. Currently, this object is used only as the VB binding variable for alarms.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.6
hwBfdSessBindIfName
This object indicates the name of the interface bound to a BFD session. Currently, this object is used only as the VB binding variable for alarms.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.7
hwBfdSessLocalDiscr
This object indicates the local descriptor of a BFD session. Currently, this object is used only as the VB binding variable for alarms.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.8
hwBfdSessRemoteDiscr
This object indicates the remote descriptor of a BFD session. Currently, this object is used only as the VB binding variable for alarms.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.9
hwBfdSessOperMode
Describe the current operating mode configured with the BFD session.
Options:
1. 0 -asynchronous mode with echo function
2. 1 -asynchronous mode without echo function
3. 2 -demand mode with echo function
4. 3 -demand mo…
Integer32
Constraints:
range: 0-6
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.10
hwBfdSessDetectMult
Detect time multiplier. The negotiated transmit interval,
multiplied by this value, provides the detection time for
the transmitting system in Asynchronous mode.
Default: 3
Unsigned32
Constraints:
range: 3-50
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.11
hwBfdSessDemandTimerInterval
It is the detecting interval in the BFD session with the demand mode.
Unit: millisecond
BfdInterval
Textual Convention: BfdInterval Integer32
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.12
hwBfdSessActualRxInterval
This is the minimum interval, in milliseconds, between
received BFD Control packets that this system is capable
of supporting.
Unit: millisecond
BfdInterval
Textual Convention: BfdInterval Integer32
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.13
hwBfdSessActualTxInterval
This is the minimum interval, in milliseconds, that the
local system would like to use when transmitting BFD
Control packets.
Unit: millisecond
BfdInterval
Textual Convention: BfdInterval Integer32
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.14
hwBfdSessWTRInterval
The WTR interval of the BFD session.
Unit: minute
Integer32
Constraints:
range: 0-60
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.15
hwBfdSessTOS
This is the TOS value of bfd packet.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.16
hwBfdSessState
Describe the current state of the BFD session.
Options:
1. 0 -admin down
2. 1 -down
3. 2 -init
4. 3 -up
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.17
hwBfdSessDiag
A diagnostic code specifying the local system's reason for
the last session state change.
Options:
1. 0 -no diagnostic
2. 1 -control detection time expired
3. 2 -echo function failed
4. 3 -neighbor s…
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.18
hwBfdSessSourceAddr
The source address of the session.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.19
hwBfdSessVrfIndex
The index of the VPN interface.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.20
hwBfdSessVPNName
The name of VPN interface.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.21
hwBfdSessType
The type of the BFD session.
Options:
1. static(1) -static
2. dynamic(2) -dynamic
3. entireDynamic(3) -entire dynamic
4. auto(4) -auto
Enumeration
Enumerated Values:
1static
2dynamic
3entireDynamic
4auto
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.22
hwBfdSessBindAppType
The Application type that this BFD session has been bound to
Options:
1. noApplication(1) -No application
2. vrrp(2) -VRRP
3. ifnet(3) -IFNET
4. vrrpAndIfnet(4) …
Enumeration
Enumerated Values:
1noApplication
2vrrp
3ifnet
4vrrpAndIfnet
5bgp
6ospf
7bgpAndOspf
8oamLspmL2vpn
9oamTnlL2vpn
10lspmL2vpnTnlps
11oamMplsfwL2vpn
12isis
13vsiPw
14vrrpOamLspmL2vpn
15vrrpOamTnlL2vpn
16vrrpLspmL2vpnTnlps
17vrrpOamMplsfwL2vpn
18pim
19bgpIsis
20bgpPim
21ospfIsis
22ospfPim
23isisPim
24bgpOspfIsis
25bgpOspfPim
26bgpIsisPim
27ospfIsisPim
28bgpOspfIsisPim
29bgp6
30ospfv3
31isis6
32pim6
33bgp6Ospfv3
34bgp6Isis6
35bgp6Pim6
36ospfv3Isis6
37ospfv3Pim6
38isis6Pim6
39bgp6Ospfv3Isis6
40bgp6Ospfv3Pim6
41bgp6Isis6Pim6
42ospfv3Isis6Pim6
43bgp6Ospfv3Isis6Pim6
44auto
45autoIsis
46autoOspf
47autoBgp
48autoPim
49autoIsisOspf
50autoIsisBgp
51autoIsisPim
52autoOspfBgp
53autoOspfPim
54autoBgpPim
55autoIsisOspfBgp
56autoIsisOspfBgpPim
57autoIsis6
58autoOspfv3
59autoBgp6
60autoPim6
61autoIsis6Ospfv3
62autoIsis6Bgp6
63autoIsis6Pim6
64autoOspfv3Bgp6
65autoOspfv3Pim6
66autoBgp6Pim6
67autoIsis6Ospfv3Bgp6
68autoIsis6Ospfv3Bgp6Pim6
69etrunk
70etrunkIfnet
71etrunkVrrp
72etrunkVrrpIfnet
73etrunkOamLspmL2vpn
74etrunkOamTnlL2vpn
75etrunkLspmL2vpnTnlps
76etrunkOamMplsfwL2vpn
77etrunkvsiPw
78etrunkOamLspmL2vpnVrrp
79etrunkOamTnlL2vpnVrrp
80etrunkLspmL2vpnTnlpsVrrp
81etrunkOamMplsfwL2vpnVrrp
82rip
83bgpRip
84ospfRip
85isisRip
86pimRip
87bgpOspfRip
88bgpIsisRip
89bgpPimRip
90ospfIsisRip
91ospfPimRip
92isisPimRip
93bgpOspfIsisRip
94bgpOspfPimRip
95ospfIsisPimRip
96autoRip
97autoBgpRip
98autoOspfRip
99autoIsisRip
100autoPimRip
101autoBgpOspfRip
102autoBgpIsisRip
103autoBgpPimRip
104autoOspfIsisRip
105autoOspfPimRip
106autoIsisPimRip
107autoBgpOspfIsisRip
108autoBgpOspfPimRip
109autoOspfIsisPimRip
110autoIsisOspfBgpPimVrrp
111autoIsisOspfPimVrrp
112autoIsisOspfBgpVrrp
113autoIsisBgpPimVrrp
114autoOspfBgpPimVrrp
115autoIsisOspfVrrp
116autoIsisBgpVrrp
117autoOspfBgpVrrp
118autoIsisPimVrrp
119autoOspfPimVrrp
120autoBgpPimVrrp
121autoIsisVrrp
122autoOspfVrrp
123autoBgpVrrp
124autoPimVrrp
125autoVrrp
126autoVrrpBgp6
127autoOspfv3Isis6Pim6
128autoOspfBgpPim
129autoIsisOspfPim
130autoIsisPimBgp
131bgpOspfIsisPimRip
132autoBgpOspfIsisPimRip
133bgpRsvp
134ospfRsvp
135isisRsvp
136pimRsvp
137ripRsvp
138bgpOspfRsvp
139bgpIsisRsvp
140bgpPimRsvp
141bgpRipRsvp
142ospfIsisRsvp
143ospfPimRsvp
144ospfRipRsvp
145isisPimRsvp
146isisRipRsvp
147pimRipRsvp
148bgpOspfIsisRsvp
149bgpOspfPimRsvp
150bgpOspfRipRsvp
151bgpIsisPimRsvp
152bgpIsisRipRsvp
153bgpPimRipRsvp
154ospfIsisPimRsvp
155ospfIsisRipRsvp
156isisPimRipRsvp
157bgpOspfIsisPimRsvp
158bgpOspfIsisRipRSvp
159bgpOspfPimRipRsvp
160bgpIsisPimRipRsvp
161ospfIsisPimRipRsvp
162bgpOspfIsisPimRipRsvp
163autoRsvp
164autoBgpRsvp
165autoOspfRsvp
166autoIsisRsvp
167autoPimRsvp
168autoRipRsvp
169autoBgpOspfRsvp
170autoBgpIsisRsvp
171autoBgpPimRsvp
172autoBgpRipRsvp
173autoOspfIsisRsvp
174autoOspfPimRsvp
175autoOspfRipRsvp
176autoIsisPimRsvp
177autoIsisRipRsvp
178autoPimRipRsvp
179autoBgpOspfIsisRsvp
180autoBgpOspfPimRsvp
181autoBgpOspfRipRsvp
182autoOspfIsisPimRsvp
183autoOspfIsisRipRsvp
184autoIsisPimRipRsvp
185autoBgpOspfIsisPimRsvp
186autoBgpOspfIsisRipRsvp
187autoOspfIsisPimRipRsvp
188rsvp
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.23
hwBfdSessDefaultIp
BFD session use default multicast IP as the detect peer-ip
Options:
1. no(1) -do not use the default multicast IP
2. yes(2) -use the default multicast IP
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.24
hwBfdSessPISFlag
The state of BFD session is associated with the state of the binding interface
Options:
1. false(1) -do not associate with interface state
2. true(2) -associate with interface state
3. subif(3) -associate with interfac…
Enumeration
Enumerated Values:
1false
2true
3subif
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.25
hwBfdSessBindType
The binding type of the BFD session.
Options:
1. interfaceIp(1) -BFD for IP with peer-ip and interface
2. peerIp(2) -BFD for IP only with peer-ip
3. sourceIp(3) -BFD for IP with peer-ip and source-ip
4. if…
Enumeration
Enumerated Values:
1interfaceIp
2peerIp
3sourceIp
4ifAndSourceIp
5fec
6tunnelIf
7ospf
8isis
9ldpLsp
10staticLsp
11teLsp
12teTunnel
13pw
15vsiPw
21ldpTunnel
22bgpTunnel
23vxlan
24evpl
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.26
hwBfdSessNextHop
It is the next hop of the BFD session.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.27
hwBfdSessStaticLspName
It is the static LSP name of the BFD session.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.28
hwBfdSessLspIndex
It is the index of the static LSP or LDP LSP in BFD session, mapping the channel index in MPLS network.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.29
hwBfdSessPWSecondaryFlag
The role of the PW bound with BFD session.
Options:
1. flagMasterPW(1) -master PW
2. flagSecondaryPW(2) -secondary PW
3. flagNoPW(3) -no PW
Default: 1
Enumeration
Enumerated Values:
1flagMasterPW
2flagSecondaryPW
3flagNoPW
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.30
hwBfdSessTunnelDetectType
Set the failure notifies policy type.
Options:
1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down
2. flagNeighborDown(2) -notify applications only when detecting Neighbor-Down
…
Enumeration
Enumerated Values:
1flagBothDown
2flagNeighborDown
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.31
hwBfdSessVcId
It is the ID of VC.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.32
hwBfdSessVsiName
It is the name of VSI.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.33
hwBfdSessVsiPeerAddr
It is the peer-ip of VSI.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.34
hwBfdSessDiscrAuto
Describe whether the discriminator can be auto allocated.
Options:
1. enabled(1) -the discriminator can be allocated automatically
2. disabled(2) -the discriminator cannot be allocated automatically
Default: disabled
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.35
hwBfdSessPeerIpv6Addr
Define the peer IPv6 address of the BFD session.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.36
hwBfdSessSourceIpv6Addr
Define the source IPv6 address of the BFD session.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.37
hwBfdSessIpv6NextHop
It is the next hop of the BFD session.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.38
hwBfdSessIsIPv6Addr
Whether the peer address of the BFD session is IPv6 address.
Default: false
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.39
hwBfdSessMeticulous
Whether enable meticulous authentication for SHA-1 type.
Options:
1. enabled(1) -enable meticulous authentication for SHA-1 type
2. disabled(2) -disabled meticulous authentication for SHA-1 type
Default: 2
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.40
hwBfdSessLooseAuthentication
Whether loose authentication check.
Options:
1. True(1) -loose-check
2. False(2) -do not loose-check
Default: false
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.41
hwBfdSessAuthenticationStatus
Authentication status of the bfd session
Options:
1. 0 -authentication disable
2. 1 -interface board do not support bfd authentication
3. 2 -keychain does not exist
4. 3 -auth BFD session number …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.42
hwBfdSessOneArmEcho
The value of this object identifies whether a session works in one-arm-echo mode.
Options:
1. enabled(1) -indicates that the session works in one-arm-echo mode
2. disabled(2) -indicates that the session does not work i…
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.43
hwBfdSessPWTtlMode
The value of this object identifies the configuration mode of a TTL used by
the BFD session for PW.
Options:
1. config(1) -indicates that the TTL is manually set
2. auto(2) -indicates that the TTL is automatically…
Enumeration
Enumerated Values:
1config
2auto
3default
4nottl
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.44
hwBfdSessPWTtl
The value of this object identifies the TTL used by the BFD session for PW.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.45
hwBfdSessRemotePeerIpType
The value of this object identifies the type of the destination address of the BFD
session for PW.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.46
hwBfdSessRemotePeerIp
The value of this object identifies the destination IP address of the BFD session
for PW.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.47
hwBfdSessSelectBoard
This object indicates the main processing board of a BFD session.
OctetString
Constraints:
range: 1-47
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.48
hwBfdSessPWSPE
The value of this object identifies the node on which a BFD session is set up.
The values are as follows.
Options:
1. upe(1) -indicates that a BFD session is set up on a UPE to detect a PW
2. spe(2) -indicates that a …
Enumeration
Enumerated Values:
1upe
2spe
3none
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.49
hwBfdSessPWTrackIfName
This object indicates the interface monitored by the BFD session for PW.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.50
hwBfdSessIsPWTrackIf
The value of this object identifies whether the BFD session for
PW monitors an interface. The values are as follows.
Options:
1. enabled(1) -enables the BFD session for PW to monitor the interface
2. disabled(2) -disab…
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.51
hwBfdSessEncapsulationType
The value of this object identifies the VC encapsulation type on an SPE.
The values are as follows:
fr
atm-aal5-sdu
atm-trans-cell
vlan
ethernet
hdlc
ppp
atm-nto1-vcc
atm-nto1-vpc
ip-layer2
atm-1to1-vcc
atm-1to1-vpc
atm…
OctetString
Constraints:
range: 1-63
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.52
hwBfdSessPEVid
The value of this object identifies the outer tag of a sub-interface
for QinQ VLAN tag termination or the VLAN ID of a sub-interface for
dot1q VLAN tag termination.
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.53
hwBfdSessCEVid
The value of this object identifies the inner tag in QinQ packets.
Unsigned32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.54
hwBfdSessPeerInetAddrType
The value of this object identifies the type of the destination address of the BFD
session.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.55
hwBfdSessPeerInetAddr
The value of this object identifies the destination IP address of the BFD session.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.56
hwBfdSessInetNextHopType
The value of this object identifies the type of the next hop of the BFD
session.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.57
hwBfdSessInetNextHop
The value of this object identifies the next hop of the BFD session.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.58
hwBfdSessBindAppTypeMask
A value which indicates the set of applications that
this BFD session binds. Every bit indicates a application.
The corresponding bit and applications are as follows:
bit application
0 IFNET
1 Route-Management
…
OctetString .1.3.6.1.4.1.2011.5.25.38.2.3.1.59
hwBfdSessDscp
This is the dscp value of bfd packet.
255 is invalid value.
Integer32
Constraints:
range: 255-255
range: 0-63
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.60
hwBfdSessPWId
It is the ID of PW.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.61
hwBfdSessDescription
Description about a BFD session.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.62
hwBfdSessFeNodeID
ID of the board where the session resides.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.63
hwBfdSessLinkType
Session type.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.64
hwBfdSessTunnelName
Tunnel name.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.65
hwBfdSessDownReason
Reason why the session goes down.
OctetString
Constraints:
range: 1-63
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.66
hwBfdSessEvplId
It is the ID of EVPL instance.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.3.1.67

hwBfdSessionPerTable

table
.1.3.6.1.4.1.2011.5.25.38.2.4 · 1 row entry · 13 columns
Open in standard view 
This table specifies BFD Session performance counters.
hwBfdSessionPerEntry entry .1.3.6.1.4.1.2011.5.25.38.2.4.1
This table specifies BFD Session performance counters.
The index of this entry is hwBfdSessPerIndex.
Indexes
hwBfdSessPerIndex
Column Syntax OID
hwBfdSessPerIndex
The index of BFD session statistics.
This index is automatically allocated inside the system
and is not user-configurable.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2011.5.25.38.2.4.1.1
hwBfdSessPerfPktIn
The statistical information of the received Octets in local
system in this session.The total received packet number.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.4.1.2
hwBfdSessPerfPktInHC
The statistical information of the received Octets in local
system in this session.The high 4 bytes of total received
packet number.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.4.1.3
hwBfdSessPerfPktOut
The statistical information of the send Packets in local
system in this session.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.4.1.4
hwBfdSessPerfPktOutHC
The statistical information of the send Packets in local
system in this session.The high 4 bytes of total send
packet number.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.4.1.5
hwBfdSessPerfBadIn
The statistical information of the received Errors in local
system in this session.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.4.1.6
hwBfdSessPerfBadInHC
The statistical information of the received Errors in local
system in this session.The high 4 bytes of total received wrong
packet number.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.4.1.7
hwBfdSessPerfBadOut
The statistical information of the send Errors in local
system in this session.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.4.1.8
hwBfdSessPerfBadOutHC
The statistical information of the send Errors in local
system in this session.The high 4 bytes of total send
wrong packet number.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.4.1.9
hwBfdSessPerfLastSessDownTime
The time of session last time down.
OctetString .1.3.6.1.4.1.2011.5.25.38.2.4.1.10
hwBfdSessPerfSessDownCount
The total count of session down.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.4.1.11
hwBfdSessPerfSessShortBreakCount
The total count of session shortbreak.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.38.2.4.1.12
hwBfdSessionPerStartTime
The time that session start detection.
OctetString .1.3.6.1.4.1.2011.5.25.38.2.4.1.13

hwBfdSlotTable

table
.1.3.6.1.4.1.2011.5.25.38.2.5 · 1 row entry · 5 columns
Open in standard view 
The Slot table of BFD.
BFD statistics on specify board of containing the following objects.
hwBfdSlotEntry entry .1.3.6.1.4.1.2011.5.25.38.2.5.1
The Slot table of BFD.
BFD statistics on specify board of containing the following objects.
The index of this entry is hwBfdSlotID.
Indexes
hwBfdSlotID
Column Syntax OID
hwBfdSlotID
The ID of slot.
Unsigned32
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.38.2.5.1.1
hwBfdSlotReserveOneHopSessNum
The number of session reserving for one-hop session on the board.
Unsigned32r/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.2011.5.25.38.2.5.1.2
hwBfdSlotOneHopSessNum obsolete
The number of session for one-hop session on the board.
Unsigned32
Constraints:
range: 0-512
 .1.3.6.1.4.1.2011.5.25.38.2.5.1.3
hwBfdSlotCurrentSessNum
The number of session on the board on current.
Unsigned32
Constraints:
range: 0-512
 .1.3.6.1.4.1.2011.5.25.38.2.5.1.4
hwBfdSlotRowStatus
Used to manage the creation and deletion of conceptual rows.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.38.2.5.1.5

hwBfdTtlConfTable

table
.1.3.6.1.4.1.2011.5.25.38.2.6 · 1 row entry · 5 columns
Open in standard view 
The TTL configuration table.
hwBfdTtlConfEntry entry .1.3.6.1.4.1.2011.5.25.38.2.6.1
The TTL configuration table.
The index of this entry is hwBfdTtlConfAddr, hwBfdTtlConfMaskLen and hwBfdTtlConfType.
Indexes
hwBfdTtlConfAddr hwBfdTtlConfMaskLen hwBfdTtlConfType
Column Syntax OID
hwBfdTtlConfAddr
IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.38.2.6.1.1
hwBfdTtlConfMaskLen
Length of IP address mask.
Integer32
Constraints:
range: 8-32
 .1.3.6.1.4.1.2011.5.25.38.2.6.1.2
hwBfdTtlConfType
Type of BFD session.
Options:
1. singleHop(1) -single hop bfd session
2. multiHop(2) -multi hop bfd session
Enumeration
Enumerated Values:
1singleHop
2multiHop
 .1.3.6.1.4.1.2011.5.25.38.2.6.1.3
hwBfdTtlConfValue
TTL value.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.2011.5.25.38.2.6.1.4
hwBfdTtlConfRowStatus
The status of this table entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.38.2.6.1.50

hwBfdPassiveAuthTable

table
.1.3.6.1.4.1.2011.5.25.38.2.7 · 1 row entry · 6 columns
Open in standard view 
The authentication configuration table for entire dynamic bfd session on egress.
hwBfdPassiveAuthEntry entry .1.3.6.1.4.1.2011.5.25.38.2.7.1
The authentication configuration table for entire dynamic bfd session on egress.
The index of this entry is hwBfdPassiveAuthPeerAddr and hwBfdPassiveAuthProtocol.
Indexes
hwBfdPassiveAuthPeerAddr hwBfdPassiveAuthProtocol
Column Syntax OID
hwBfdPassiveAuthPeerAddr
Specify the Lsr-id IP address of the ingress.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.38.2.7.1.1
hwBfdPassiveAuthProtocol
Specify the protocol on ingress.
Options:
1. te(1) -MPLS TE protocol
2. ldp(2) -MPLS LDP protocol
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.2011.5.25.38.2.7.1.2
hwBfdPassiveAuthKeychainName
Specify the name of the keychain for authentication of entire dynamic bfd session.
OctetStringr/w
Constraints:
range: 1-47
 .1.3.6.1.4.1.2011.5.25.38.2.7.1.3
hwBfdPassiveAuthMeticulous
Whether enable meticulous authentication for SHA-1 type.
Options:
1. enabled(1) -enable meticulous authentication for SHA-1 type
2. disabled(2) -disabled meticulous authentication for SHA-1 type
Default: 2
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.38.2.7.1.4
hwBfdPassiveAuthLoose
Whether loose authentication check.
Options:
1. True(1) -loose-check
2. False(2) -do not loose-check
Default: false
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.38.2.7.1.5
hwBfdPassiveAuthRowStatus
The status of this table entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.38.2.7.1.50