hwBfdSessOneArmEcho
HUAWEI-BFD-MIB ·
.1.3.6.1.4.1.2011.5.25.38.2.3.1.43
Object
column
P-BRIDGE-MIBEnabledStatus
The value of this object identifies whether a session works in one-arm-echo mode. Options: 1. enabled(1) -indicates that the session works in one-arm-echo mode 2. disabled(2) -indicates that the session does not work in one-arm-echo mode Default: disabled
Context
- MIB
- HUAWEI-BFD-MIB
- OID
.1.3.6.1.4.1.2011.5.25.38.2.3.1.43- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwBfdSessionEntry
- Table
- hwBfdSessionTable
- Siblings
- 66
Syntax
P-BRIDGE-MIBEnabledStatus
- Source
- P-BRIDGE-MIBEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwBfdSessIndex It is unique and the Index of this session.
This index is automatically allocated inside the system
and is not user-configurable. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.1 |
| hwBfdSessOperMode Describe the current operating mode configured with the BFD session.
Options:
1. 0 -asynchronous mode with echo function
2. 1 -asynchronous mode without echo function
3. 2 -demand… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.10 |
| hwBfdSessDetectMult Detect time multiplier. The negotiated transmit interval,
multiplied by this value, provides the detection time for
the transmitting system in Asynchronous mode.
Default: 3 | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.11 |
| hwBfdSessDemandTimerInterval It is the detecting interval in the BFD session with the demand mode.
Unit: millisecond | column | BfdInterval | .1.3.6.1.4.1.2011.5.25.38.2.3.1.12 |
| hwBfdSessActualRxInterval This is the minimum interval, in milliseconds, between
received BFD Control packets that this system is capable
of supporting.
Unit: millisecond | column | BfdInterval | .1.3.6.1.4.1.2011.5.25.38.2.3.1.13 |
| hwBfdSessActualTxInterval This is the minimum interval, in milliseconds, that the
local system would like to use when transmitting BFD
Control packets.
Unit: millisecond | column | BfdInterval | .1.3.6.1.4.1.2011.5.25.38.2.3.1.14 |
| hwBfdSessWTRInterval The WTR interval of the BFD session.
Unit: minute | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.15 |
| hwBfdSessTOS This is the TOS value of bfd packet. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.16 |
| hwBfdSessState Describe the current state of the BFD session.
Options:
1. 0 -admin down
2. 1 -down
3. 2 -init
4. 3 -up | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.17 |
| hwBfdSessDiag A diagnostic code specifying the local system's reason for
the last session state change.
Options:
1. 0 -no diagnostic
2. 1 -control detection time expired
3. 2 -ec… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.18 |
| hwBfdSessSourceAddr The source address of the session. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.38.2.3.1.19 |
| hwBfdSessMIndex This value indicate the configuration has Main Index. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.2 |
| hwBfdSessVrfIndex The index of the VPN interface. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.20 |
| hwBfdSessVPNName The name of VPN interface. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.21 |
| hwBfdSessType The type of the BFD session.
Options:
1. static(1) -static
2. dynamic(2) -dynamic
3. entireDynamic(3) -entire dynamic
4. auto(4) -auto | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.3.1.22 |
| hwBfdSessBindAppType The Application type that this BFD session has been bound to
Options:
1. noApplication(1) -No application
2. vrrp(2) -VRRP
3. ifnet(3) … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.3.1.23 |
| hwBfdSessDefaultIp BFD session use default multicast IP as the detect peer-ip
Options:
1. no(1) -do not use the default multicast IP
2. yes(2) -use the default multicast IP | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.3.1.24 |
| hwBfdSessPISFlag The state of BFD session is associated with the state of the binding interface
Options:
1. false(1) -do not associate with interface state
2. true(2) -associate with interface st… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.3.1.25 |
| hwBfdSessBindType The binding type of the BFD session.
Options:
1. interfaceIp(1) -BFD for IP with peer-ip and interface
2. peerIp(2) -BFD for IP only with peer-ip
3. sourceIp(3) -BFD… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.3.1.26 |
| hwBfdSessNextHop It is the next hop of the BFD session. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.38.2.3.1.27 |
| hwBfdSessStaticLspName It is the static LSP name of the BFD session. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.28 |
| hwBfdSessLspIndex It is the index of the static LSP or LDP LSP in BFD session, mapping the channel index in MPLS network. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.29 |
| hwBfdSessBindVRRP Describe the capability of bound with VRRP for the BFD session.
Options:
1. notBind(0) -not bind
2. bind(1) -bind | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.3 |
| hwBfdSessPWSecondaryFlag The role of the PW bound with BFD session.
Options:
1. flagMasterPW(1) -master PW
2. flagSecondaryPW(2) -secondary PW
3. flagNoPW(3) -no PW
Default: 1 | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.3.1.30 |
| hwBfdSessTunnelDetectType Set the failure notifies policy type.
Options:
1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down
2. flagNeighborDown(2) -notify applica… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.3.1.31 |
| hwBfdSessVcId It is the ID of VC. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.32 |
| hwBfdSessVsiName It is the name of VSI. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.33 |
| hwBfdSessVsiPeerAddr It is the peer-ip of VSI. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.38.2.3.1.34 |
| hwBfdSessDiscrAuto Describe whether the discriminator can be auto allocated.
Options:
1. enabled(1) -the discriminator can be allocated automatically
2. disabled(2) -the discriminator cannot be a… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.38.2.3.1.35 |
| hwBfdSessPeerIpv6Addr Define the peer IPv6 address of the BFD session. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.25.38.2.3.1.36 |
| hwBfdSessSourceIpv6Addr Define the source IPv6 address of the BFD session. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.25.38.2.3.1.37 |
| hwBfdSessIpv6NextHop It is the next hop of the BFD session. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.25.38.2.3.1.38 |
| hwBfdSessIsIPv6Addr Whether the peer address of the BFD session is IPv6 address.
Default: false | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.38.2.3.1.39 |
| hwBfdSessCfgName This object indicates the name of a BFD session. Currently, this object is used only as the VB binding variable for alarms. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.4 |
| hwBfdSessMeticulous Whether enable meticulous authentication for SHA-1 type.
Options:
1. enabled(1) -enable meticulous authentication for SHA-1 type
2. disabled(2) -disabled meticulous authenticatio… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.38.2.3.1.40 |
| hwBfdSessLooseAuthentication Whether loose authentication check.
Options:
1. True(1) -loose-check
2. False(2) -do not loose-check
Default: false | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.38.2.3.1.41 |
| hwBfdSessAuthenticationStatus Authentication status of the bfd session
Options:
1. 0 -authentication disable
2. 1 -interface board do not support bfd authentication
3. 2 -keychain does not ex… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.42 |
| hwBfdSessPWTtlMode The value of this object identifies the configuration mode of a TTL used by
the BFD session for PW.
Options:
1. config(1) -indicates that the TTL is manually set
2. auto(2) … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.3.1.44 |
| hwBfdSessPWTtl The value of this object identifies the TTL used by the BFD session for PW. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.45 |
| hwBfdSessRemotePeerIpType The value of this object identifies the type of the destination address of the BFD
session for PW. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.38.2.3.1.46 |
| hwBfdSessRemotePeerIp The value of this object identifies the destination IP address of the BFD session
for PW. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.38.2.3.1.47 |
| hwBfdSessSelectBoard This object indicates the main processing board of a BFD session. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.48 |
| hwBfdSessPWSPE The value of this object identifies the node on which a BFD session is set up.
The values are as follows.
Options:
1. upe(1) -indicates that a BFD session is set up on a UPE to d… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.3.1.49 |
| hwBfdSessPeerAddr This object indicates the destination IP address of a BFD session. Currently, this object is used only as the VB binding variable of the alarm. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.38.2.3.1.5 |
| hwBfdSessPWTrackIfName This object indicates the interface monitored by the BFD session for PW. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.50 |
| hwBfdSessIsPWTrackIf The value of this object identifies whether the BFD session for
PW monitors an interface. The values are as follows.
Options:
1. enabled(1) -enables the BFD session for PW to mon… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.38.2.3.1.51 |
| hwBfdSessEncapsulationType The value of this object identifies the VC encapsulation type on an SPE.
The values are as follows:
fr
atm-aal5-sdu
atm-trans-cell
vlan
ethernet
hdlc
ppp
atm-nto1-vcc
atm-nto1-vpc… | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.52 |
| hwBfdSessPEVid The value of this object identifies the outer tag of a sub-interface
for QinQ VLAN tag termination or the VLAN ID of a sub-interface for
dot1q VLAN tag termination. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.53 |
| hwBfdSessCEVid The value of this object identifies the inner tag in QinQ packets. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.54 |
| hwBfdSessPeerInetAddrType The value of this object identifies the type of the destination address of the BFD
session. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.38.2.3.1.55 |
| hwBfdSessPeerInetAddr The value of this object identifies the destination IP address of the BFD session. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.38.2.3.1.56 |
| hwBfdSessInetNextHopType The value of this object identifies the type of the next hop of the BFD
session. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.38.2.3.1.57 |
| hwBfdSessInetNextHop The value of this object identifies the next hop of the BFD session. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.38.2.3.1.58 |
| hwBfdSessBindAppTypeMask A value which indicates the set of applications that
this BFD session binds. Every bit indicates a application.
The corresponding bit and applications are as follows:
bit applic… | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.59 |
| hwBfdSessBindIfIndex This object indicates the index of the interface bound to a BFD session. Currently, this object is used only as the VB binding variable for alarms. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.6 |
| hwBfdSessDscp This is the dscp value of bfd packet.
255 is invalid value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.60 |
| hwBfdSessPWId It is the ID of PW. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.61 |
| hwBfdSessDescription Description about a BFD session. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.62 |
| hwBfdSessFeNodeID ID of the board where the session resides. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.63 |
| hwBfdSessLinkType Session type. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.64 |
| hwBfdSessTunnelName Tunnel name. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.65 |
| hwBfdSessDownReason Reason why the session goes down. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.66 |
| hwBfdSessEvplId It is the ID of EVPL instance. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.67 |
| hwBfdSessBindIfName This object indicates the name of the interface bound to a BFD session. Currently, this object is used only as the VB binding variable for alarms. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.3.1.7 |
| hwBfdSessLocalDiscr This object indicates the local descriptor of a BFD session. Currently, this object is used only as the VB binding variable for alarms. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.8 |
| hwBfdSessRemoteDiscr This object indicates the remote descriptor of a BFD session. Currently, this object is used only as the VB binding variable for alarms. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.3.1.9 |