hwBfdSessConfBindType
HUAWEI-BFD-MIB ·
.1.3.6.1.4.1.2011.5.25.38.2.2.1.24
Object
column
r/w
Enumeration
The binding type of the BFD session. Options: 1. interfaceIp(1) -BFD for IP with peer-ip and interface 2. peerIp(2) -BFD for IP only with peer-ip 3. sourceIp(3) -BFD for IP with peer-ip and source-ip 4. ifAndSourceIp(4) -BFD for IP with peer-ip, interface and source-ip 5. fec(5) -BFD for FEC(NOT support now) 6. tunnelIf(6) -BFD for Tunnel interface(NOT support now) 7. ospf(7) -BFD for OSPF 8. isis(8) -BFD for ISIS 9. ldpLsp(9) -BFD for LDP-LSP 10. staticLsp(10) -BFD for static LSP 11. teLsp(11) -BFD for TE-LSP 12. teTunnel(12) -BFD for TE-Tunnel 13. pw(13) -BFD for PW 14. vsiPw(15) -BFD for VSI PW 15. ldpTunnel(21) -BFD for LDP-Tunnel 16. bgpTunnel(22) -BFD for BGP-Tunnel
Context
- MIB
- HUAWEI-BFD-MIB
- OID
.1.3.6.1.4.1.2011.5.25.38.2.2.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwBfdSessionConfEntry
- Table
- hwBfdSessionConfTable
- Siblings
- 53
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | interfaceIp |
2 | peerIp |
3 | sourceIp |
4 | ifAndSourceIp |
5 | fec |
6 | tunnelIf |
7 | ospf |
8 | isis |
9 | ldpLsp |
10 | staticLsp |
11 | teLsp |
12 | teTunnel |
13 | pw |
15 | vsiPw |
21 | ldpTunnel |
22 | bgpTunnel |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwBfdSessConfName It is the name of this configuration model. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.2.1.1 |
| hwBfdSessConfDetectMult It is Detect time multiplier of the configuration. The
negotiated transmit interval, multiplied by this value,
provides the detection time for the transmitting
system in Asynchron… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.10 |
| hwBfdSessConfDesiredMinRxInterval This is the minimum interval of the configuration, in
milliseconds, between received BFD Control packets
that this system is capable of supporting.
Unit: millisecond | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.11 |
| hwBfdSessConfDesiredMinTxInterval This is the minimum interval of the configuration,
in milliseconds, that the local system would
like to use when transmitting BFD Control packets.
Unit: millisecond | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.12 |
| hwBfdSessConfWTRInterval The wait-to-restore (WTR) time of the BFD session.
The event that indicates the session changing into the Up
state is reported to the application program only after
the WTR time… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.13 |
| hwBfdSessConfTOS This is the TOS value of bfd packet. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.14 |
| hwBfdSessConfPSTFlag The PST flag of the BFD session configuration.
It indicates the status association between the current BFD
session and the interface bound to the session.
Options:
1. disabled(0… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.15 |
| hwBfdSessConfCommitFlag It is the commit flag of the configuration entry.
Options:
1. notCommit(0) -not commit
2. commit(1) -commit | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.16 |
| hwBfdSessConfAdminStatus A BFD session can be administratively enabled or disabled.
The AdminStatus field indicates the BFD session status.
Options:
1. 0 -disable
2. 1 -enable | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.17 |
| hwBfdSessConfRowStatus Used to manage the creation and deletion of conceptual rows. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.38.2.2.1.18 |
| hwBfdSessConfSourceAddr Define the source IP address of the BFD session. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.38.2.2.1.19 |
| hwBfdSessConfMIndex It is the configuration index of this session. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.2 |
| hwBfdSessConfVrfIndex The index of the VPN interface. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.20 |
| hwBfdSessConfVPNName The name of VPN interface. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.2.1.21 |
| hwBfdSessConfDefaultIp BFD session use default multicast IP as the detect peer-ip
Options:
1. no(1) -do not use the default multicast IP
2. yes(2) -use the default multicast IP | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.2.1.22 |
| hwBfdSessConfPISFlag The state of BFD session is associated with the state of the binding interface
Options:
1. false(1) -do not associate with interface state
2. true(2) -associate with interface st… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.2.1.23 |
| hwBfdSessConfNextHop It is the next hop of the BFD session. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.38.2.2.1.25 |
| hwBfdSessConfStaticLspName It is the static LSP name of the BFD session. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.2.1.26 |
| hwBfdSessConfPWSecondaryFlag The role of the PW bound with BFD session.
Options:
1. flagMasterPW(1) -master PW
2. flagSecondaryPW(2)-secondary PW
3. flagNoPW(3) -no PW | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.2.1.27 |
| hwBfdSessConfTunnelDetectType Set the failure notifies policy type.
Options:
1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down
2. flagNeighborDown(2) -notify applica… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.2.1.28 |
| hwBfdSessConfVcId It is the ID of VC. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.29 |
| hwBfdSessConfLocalDiscr Define the local discriminator of the BFD session. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.3 |
| hwBfdSessConfVsiName It is the name of VSI. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.2.1.30 |
| hwBfdSessConfVsiPeerAddr It is the peer-ip of VSI. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.38.2.2.1.31 |
| hwBfdSessConfDiscrAuto Describe whether the discriminator can be auto allocated.
Options:
1. enabled(1) -the discriminator can be allocated automatically
2. disabled(2) -the discriminator cannot be all… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.38.2.2.1.32 |
| hwBfdSessConfPeerIpv6Addr Define the peer IPv6 address of the BFD session. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.25.38.2.2.1.33 |
| hwBfdSessConfSourceIpv6Addr Define the source IPv6 address of the BFD session. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.25.38.2.2.1.34 |
| hwBfdSessConfIpv6NextHop It is the next hop of the BFD session. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2011.5.25.38.2.2.1.35 |
| hwBfdSessConfIsIpv6Addr Whether the peer address of the BFD session is IPv6 address. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.38.2.2.1.36 |
| hwBfdSessConfKeychainName Specify the name of the keychain for authentication. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.2.1.37 |
| hwBfdSessConfMeticulous Whether enable meticulous authentication for SHA-1 type.
Options:
1. enabled(1) -enable meticulous authentication for SHA-1 type
2. disabled(2) -disabled meticulous authenticatio… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.38.2.2.1.38 |
| hwBfdSessConfLooseAuthentication Whether loose authentication check.
Options:
1.True(1) -loose-check
2.False(2) -do not loose-check | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.38.2.2.1.39 |
| hwBfdSessConfRemoteDiscr Define the remote discriminator of the BFD session. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.4 |
| hwBfdSessConfOneArmEcho The value of this object identifies whether a session works in one-arm-echo mode.
Options:
1. enabled(1) -indicates that the session works in one-arm-echo mode
2. disabled(2) -in… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.38.2.2.1.40 |
| hwBfdSessConfMinEchoRxInterval The value of this object identifies the minimum interval between received BFD
Control packets, in milliseconds.This value reflects the capability of receiving
BFD Control packets.… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.41 |
| hwBfdSessConfPWTtlMode The value of this object identifies the configuration mode of a TTL used by
the BFD session for PW.
Options:
1. config(1) -indicates that the TTL is manually set
2. auto(2) -ind… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.2.1.42 |
| hwBfdSessConfPWTtl The value of this object identifies the TTL used by the BFD session for PW.
The vlaue is configurable only when the configuration mode of a TTL is config. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.43 |
| hwBfdSessConfRemotePeerIpType The value of this object identifies the type of the destination address of the BFD
session for PW. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.38.2.2.1.44 |
| hwBfdSessConfRemotePeerIp The value of this object identifies the destination IP address of the BFD session
for PW. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.38.2.2.1.45 |
| hwBfdSessConfSelectBoard This object indicates the main processing board of a BFD session. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.2.1.46 |
| hwBfdSessConfPWSPE The value of this object identifies the node on which a BFD session is set up.
The values are as follows.
Options:
1. upe(1) -indicates that a BFD session is set up on a UPE to d… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.2.1.47 |
| hwBfdSessConfPWTrackIfName This object indicates the interface monitored by the BFD session for PW. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.2.1.48 |
| hwBfdSessConfIsPWTrackIf The value of this object identifies whether the BFD session for
PW monitors an interface. The values are as follows.
Options:
1. enabled(1) -enables the BFD session for PW to moni… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.38.2.2.1.49 |
| hwBfdSessConfPeerAddr Define the IP address of the peer in the BFD session. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.38.2.2.1.5 |
| hwBfdSessConfEncapsulationType The value of this object identifies the VC encapsulation type on an SPE.
The values are as follows:
fr
atm-aal5-sdu
atm-trans-cell
vlan
ethernet
hdlc
ppp
atm-nto1-vcc
atm-nto1-vpc… | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.2.1.50 |
| hwBfdSessConfPEVid The value of this object identifies the outer tag of a sub-interface
for QinQ VLAN tag termination or the VLAN ID of a sub-interface for
dot1q VLAN tag termination. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.51 |
| hwBfdSessConfCEVid The value of this object identifies the inner tag in QinQ packets. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.52 |
| hwBfdSessConfTOSEx This is the extended TOS value of bfd packet. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.53 |
| hwBfdSessConfbImpactFlag BFD session impact interface when the device reboot
Options:
1. no(1) -do not impact interface when the device reboot
2. yes(2) -impact interface when the device reboot | column | Enumeration | .1.3.6.1.4.1.2011.5.25.38.2.2.1.54 |
| hwBfdSessConfBindIfIndex It is the index of the binding interface in the BFD configuration. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.6 |
| hwBfdSessConfBindIfName It is the name of the binding interface in the BFD configuration. | column | OctetString | .1.3.6.1.4.1.2011.5.25.38.2.2.1.7 |
| hwBfdSessConfDemandEnable It is the flag of the BFD demand mode.
Options:
1. disabled(0) -disable the BFD demand mode
2. enabled(1) -enable the BFD demand mode | column | Integer32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.8 |
| hwBfdSessConfDemandTimerInterval Define the detecting interval in the BFD session with the demand mode.
Unit: millisecond | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.38.2.2.1.9 |