HUAWEI-ANCP-AN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
41

ancpAnSessionConfigTable

table
.1.3.6.1.4.1.2011.5.106.1.3 · 1 row entry · 25 columns
Open in standard view 
This table represents the ANCP sessions in the access
node. An entry in this table needs to be configured
(created) before an ANCP session might be started.
		  The index of this table is ancpAnSessionConfigSessionId.
ancpAnSessionConfigEntry entry .1.3.6.1.4.1.2011.5.106.1.3.1
This table represents the ANCP sessions in the access
node. An entry in this table needs to be configured
(created) before an ANCP session might be started.
The index of this entry is ancpAnSessionConfigSessionId.
Indexes
No indexes recorded
Column Syntax OID
ancpAnSessionConfigSessionId
An index of a session referred by this row. The index
is unique across all partitions.
The referred session may be actually established or
just potential.
Prior to creating a row in the table it is advised to
check the …
Unsigned32 .1.3.6.1.4.1.2011.5.106.1.3.1.1
ancpAnSessionConfigRowStatus
An object that allows entries in this table to
be created, modified and deleted using the RowStatus
convention.
A SET operation to any other attribute in this row, when
this object is set to 'active' (1), MUST be reject…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.106.1.3.1.2
ancpAnSessionConfigGsmpVersion
The maximum version number of the GSMP protocol that
may be used in this session. The value of this object
is persistent.
GSMP-MIBGsmpVersionr/w
Constraints:
range: 0-7
range: 65535-65535
Textual Convention: GSMP-MIBGsmpVersion Unsigned32
 .1.3.6.1.4.1.2011.5.106.1.3.1.3
ancpAnSessionConfigGsmpSubVersion
The maximum subversion number of the GSMP protocol that
may be used in this session. The value of this object
is persistent.
HUAWEI-ANCP-TC-MIBGsmpSubVersionr/w
Textual Convention: HUAWEI-ANCP-TC-MIBGsmpSubVersion Unsigned32
 .1.3.6.1.4.1.2011.5.106.1.3.1.4
ancpAnSessionConfigEncapsulationType
Required encapsulation for this session. The value of
this object is persistent.
Options:
1. tcp(1) -indicates that the type is tcp.
Enumerationr/w
Constraints:
range: 0-7
range: 65535-65535
 .1.3.6.1.4.1.2011.5.106.1.3.1.5
ancpAnSessionConfigCapabilities
ANCP capabilities supported by the AN in this session.
When all bits are set to zero then this means that no
capabilities are supported. The value of this object
is persistent.
HUAWEI-ANCP-TC-MIBAncpSessionCapabilitiesr/w
Textual Convention: HUAWEI-ANCP-TC-MIBAncpSessionCapabilities Bits
Type Values:
0topologyDiscovery
1lineConfig
2multicast
3l2Oam
 .1.3.6.1.4.1.2011.5.106.1.3.1.6
ancpAnSessionConfigAliveTimer
The timer specifies the nominal time between periodic
adjacency protocol messages generated by the access node.
It is a constant for the duration of an ANCP session. The
timer is specified in units of 100ms. The value o…
decisecondsUnsigned32r/w .1.3.6.1.4.1.2011.5.106.1.3.1.7
ancpAnSessionConfigPortReportShaper
The timer specifies the nominal time between
2 EventReport messages related to the same port.
It is a constant for the duration of a GSMP session.
The timer is specified in units of 100ms. The value
of this object is pe…
decisecondsUnsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.5.106.1.3.1.8
ancpAnSessionConfigAggregateReportShaper
The timer specifies the nominal time between
2 EventReport messages related to any port.
It is a constant for the duration of a GSMP session.
The timer is specified in units of 10ms. The value
of this object is persiste…
centisecondsUnsigned32r/w .1.3.6.1.4.1.2011.5.106.1.3.1.9
ancpAnSessionConfigTransportRetryTimer
The timer specifies the nominal time between 2 transport
connection setup attempts done by the access node.
The transport protocol is specified in
ancpAnSessionConfigEncapsulationType.
The timer is specified in units of…
decisecondsUnsigned32r/w .1.3.6.1.4.1.2011.5.106.1.3.1.10
ancpAnSessionConfigAncpRetryTimer
The timer specifies the nominal time between
2 ANCP connection setup attempts.
The timer is specified in units of 100ms.
A value 0 means that the access node will NOT
spontaneously trigger an ANCP session.
Whatever the …
decisecondsUnsigned32r/w .1.3.6.1.4.1.2011.5.106.1.3.1.11
ancpAnSessionConfigAnName
The name of the access node. The first three octets must
be an Organizationally Unique Identifier (OUI) that
identifies the manufacturer of the access node. This
object can be (one of) the MAC address(es) of the access
…
GSMP-MIBGsmpNameTyper/w
Textual Convention: GSMP-MIBGsmpNameType OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.106.1.3.1.12
ancpAnSessionConfigPartitionId
The Id for this session's specific access node partition.
This object has a meaning only if partitions are used
(ancpAnPartitionsUsed='true') and is ignored
otherwise.
The value of this object is persistent.
GSMP-MIBGsmpPartitionIdTyper/w
Enumerated Values:
1null
2synsent
3synrcvd
4estab
Textual Convention: GSMP-MIBGsmpPartitionIdType OctetString
Type Constraints:
range: 1
 .1.3.6.1.4.1.2011.5.106.1.3.1.13
ancpAnSessionConfigWindowSize
The maximum number of unacknowledged request messages
that may be transmitted by the controller without the
possibility of loss. This field is used to prevent
request messages from being lost in the access node
because …
Unsigned32r/w .1.3.6.1.4.1.2011.5.106.1.3.1.14
ancpAnSessionConfigRelatedInterface
This object contains the value of an ifIndex object,
defined in IF-MIB, indicating an interface corresponding
to this session.
The corresponding interface might be either physical
or logical (e.g., IP Interface).
The va…
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.5.106.1.3.1.15
ancpAnSessionConfigRelatedEntity
This object contains the name of an object instance
uniquely identifying a lower layer entity associated
with this session. For example, in the case where
the session is associated with an ATM VCC, this object
might be…
SNMPv2-TCRowPointerr/w
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.2011.5.106.1.3.1.16
ancpAnSessionConfigSvid
If the session is associated with a single VLAN, this
object contains the VLAN ID of the single VLAN tag. If
ancpAnSessionConfigCvid is also nonzero then the session
is associated with two VLAN tags, S-VLAN tag and C-VL…
Q-BRIDGE-MIBVlanIdOrNoner/w
Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2011.5.106.1.3.1.17
ancpAnSessionConfigSPrio
If the session is associated with a single VLAN, this
object contains the priority value of the single VLAN tag.
If ancpAnSessionConfigCvid is also nonzero then the
session is associated with two VLAN tags, S-VLAN tag a…
Unsigned32r/w .1.3.6.1.4.1.2011.5.106.1.3.1.18
ancpAnSessionConfigCvid
If the session is associated with two VLANs, has both
S-VLAN tag and C-VLAN tag, this object contains the VLAN
ID of the inner VLAN tag (also called C-VLAN ID). In such
a case the value of this object SHOULD be nonzero.…
Q-BRIDGE-MIBVlanIdOrNoner/w
Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2011.5.106.1.3.1.19
ancpAnSessionConfigCPrio
If the session is associated with two VLANs, has both
S-VLAN tag and C-VLAN tag, this object contains the
priority value of the inner VLAN tag (also called C-VLAN
priority). In such a case the value of this object SHOUL…
Unsigned32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.2011.5.106.1.3.1.20
ancpAnSessionConfigNasIpAddressType
The type of address in ancpAnSessionConfigNasIpAddress.
The value of this object is persistent.
INET-ADDRESS-MIBInetAddressTyper/w
Constraints:
range: 0-16777215
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.106.1.3.1.21
ancpAnSessionConfigNasIpAddress
The IP address used for the ANCP session peer (NAS).
The type of this IP address attribute is determined
by the value of ancpAnSessionConfigNasIpAddressType.
The value of this object is persistent.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.106.1.3.1.22
ancpAnSessionConfigEncapPortNumber
The port number used for the transport protocol
establishment to the ANCP peer. The transport
protocol type is specified by
ancpAnSessionConfigEncapsulationType and as
it is set by default to 'tcp' then the default
port…
Unsigned32r/w .1.3.6.1.4.1.2011.5.106.1.3.1.23
ancpAnSessionConfigNotifyDnEnable
This object specifies if ancpAnSessionDown
notification should be generated when this session
leaves the 'estab' state as given by
ancpAnCurrentSessionState in the corresponding row
in ancpAnCurrentSessionTable.
The val…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.106.1.3.1.24
ancpAnSessionConfigNotifyUpEnable
This object specifies if ancpAnSessionUp
notification should be generated when this session
goes to 'estab' state as given by
ancpAnCurrentSessionState in the corresponding row
in ancpAnCurrentSessionTable.
The value of…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.106.1.3.1.25

ancpAnCurrentSessionTable

table
.1.3.6.1.4.1.2011.5.106.1.4 · 1 row entry · 15 columns
Open in standard view 
This table gives actual information of the sessions
in the access node.
A row in this table is created when the corresponding row
in the ancpAnSessionConfigTable is created.
A row in this table is deleted when the corresponding row
in the ancpAnSessionConfigTable is deleted.
		  The index of this table is ancpAnSessionConfigSessionId.
ancpAnCurrentSessionEntry entry .1.3.6.1.4.1.2011.5.106.1.4.1
This table gives actual information of the sessions
in the access node.
A row in this table is created when the corresponding row
in the ancpAnSessionConfigTable is created.
A row in this table is deleted when the corre…
Indexes
No indexes recorded
Column Syntax OID
ancpAnCurrentSessionState
The state of this session.
The null (1) state is returned if the proper
encapsulation data is not yet configured, if the row is
not in active status or if the session is in NULL state
as defined in the GSMP specificatio…
Enumeration .1.3.6.1.4.1.2011.5.106.1.4.1.1
ancpAnCurrentSessionGsmpVersion
The actual version number of the GSMP protocol that
is used in this session.
This object has value 0 if ancpAnCurrentSessionState is
not estab(4).
GSMP-MIBGsmpVersion
Textual Convention: GSMP-MIBGsmpVersion Unsigned32
 .1.3.6.1.4.1.2011.5.106.1.4.1.2
ancpAnCurrentSessionGsmpSubVersion
The actual subversion number of the GSMP protocol that
may be used in this session.
This object has value 0 if ancpAnCurrentSessionState is
not estab(4).
HUAWEI-ANCP-TC-MIBGsmpSubVersion
Textual Convention: HUAWEI-ANCP-TC-MIBGsmpSubVersion Unsigned32
 .1.3.6.1.4.1.2011.5.106.1.4.1.3
ancpAnCurrentSessionAnName
The name of the access node used in this session.
It should be the same as ancpAnSessionConfigAnName if that
object is not set to zero. If ancpAnSessionConfigAnName
is set to zero, then this object will contain the MAC…
GSMP-MIBGsmpNameType
Textual Convention: GSMP-MIBGsmpNameType OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.106.1.4.1.4
ancpAnCurrentSessionNasName
The name of the NAS as advertised in the adjacency
message.
The value of this object is set to the value of the
'Sender Name' field in the header of the ANCP messages
received on this session. This object has value 0 i…
GSMP-MIBGsmpNameType
Textual Convention: GSMP-MIBGsmpNameType OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.106.1.4.1.5
ancpAnCurrentSessionAnIpAddressType
The type of address in ancpAnCurrentSessionAnIpAddress.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.106.1.4.1.6
ancpAnCurrentSessionAnIpAddress
The IP address used for the access node.
The type of this IP address attribute is determined
by the value of ancpAnCurrentSessionAnIpAddressType.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.106.1.4.1.7
ancpAnCurrentSessionAnInstance
The instance number used by the access node during this
session. The Instance number is a 24-bit number
that should be guaranteed to be unique within
the recent past and to change when the link
or node comes back up aft…
Unsigned32 .1.3.6.1.4.1.2011.5.106.1.4.1.8
ancpAnCurrentSessionNasInstance
The instance number used by the NAS during this
session. The Instance number is a 24-bit number
that should be guaranteed to be unique within
the recent past and to change when the link
or node comes back up after going…
Unsigned32 .1.3.6.1.4.1.2011.5.106.1.4.1.9
ancpAnCurrentSessionCapabilities
The common ANCP capabilities supported by the AN and
NAS in this session.
The object has the value 0 if no capabilities are
supported
or if ancpAnCurrentSessionState is not estab(4).
HUAWEI-ANCP-TC-MIBAncpSessionCapabilities
Textual Convention: HUAWEI-ANCP-TC-MIBAncpSessionCapabilities Bits
Type Values:
0topologyDiscovery
1lineConfig
2multicast
3l2Oam
 .1.3.6.1.4.1.2011.5.106.1.4.1.10
ancpAnCurrentSessionStartUptime
The value of sysUpTime when the session came to
established state.
This object has value 0 if ancpAnCurrentSessionState is
not estab(4).
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.106.1.4.1.11
ancpAnCurrentSessionDiscontinuityTime
The value of sysUpTime on the most recent occasion at
which session's counters suffered a discontinuity.
If no such discontinuities have occurred since then,
this object contains the same value as
ancpAnCurrentSessionSt…
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.106.1.4.1.12
ancpAnCurrentSessionStatSentMessages
The number of messages that have been sent in this session
by the access node.
All ANCP messages pertaining to this session after
the session came to established state shall
be counted, also including adjacency protocol…
RMON2-MIBZeroBasedCounter32
Textual Convention: RMON2-MIBZeroBasedCounter32 Unsigned32
 .1.3.6.1.4.1.2011.5.106.1.4.1.13
ancpAnCurrentSessionStatReceivedValidMessages
The number of messages that have been received and
processed in this session by the access node.
All ANCP messages pertaining to this session after
the session came to established state shall
be counted, also including …
RMON2-MIBZeroBasedCounter32
Textual Convention: RMON2-MIBZeroBasedCounter32 Unsigned32
 .1.3.6.1.4.1.2011.5.106.1.4.1.14
ancpAnCurrentSessionStatDiscardedMessages
The number of messages that in this session have been
received and discarded for whatever reason by the access
node.
All ANCP messages pertaining to this session after
the session came to established state shall
be coun…
RMON2-MIBZeroBasedCounter32
Textual Convention: RMON2-MIBZeroBasedCounter32 Unsigned32
 .1.3.6.1.4.1.2011.5.106.1.4.1.15

ancpAnInterfaceConfigTable

table
.1.3.6.1.4.1.2011.5.106.1.5 · 1 row entry · 1 columns
Open in standard view 
This table configures the association of user facing
interfaces to ANCP partitions in the access node.
An entry in this table needs to be added by the agent
for each relevant user facing interface with the value
of ancpAnInterfaceConfigPartitionId set to zero at the
time of the creation of the row. A relevant user facing
interface is created whenever a row is created in the
ifTable of the IF-MIB that can be controlled by ANCP.
When such an interface is deleted from the ifTable, the
corresponding row in this table has to be removed by the
agent.
Rows should only be created by the agent when
ancpAnPartitionsUsed is set to 'true'.  If no
partitions are used, then no rows should be created in
this table.
		  The index of this table is ifIndex.
ancpAnInterfaceConfigEntry entry .1.3.6.1.4.1.2011.5.106.1.5.1
This table configures the association of user facing
interfaces to ANCP partitions in the access node.
An entry in this table needs to be added by the agent
for each relevant user facing interface with the value
of ancp…
Indexes
No indexes recorded
Column Syntax OID
ancpAnInterfaceConfigPartitionId
A partition Id associated with the related ifIndex.
Upon creation of the row, the value is set to '00'H.
The value of this object is persistent.
GSMP-MIBGsmpPartitionIdTyper/w
Textual Convention: GSMP-MIBGsmpPartitionIdType OctetString
Type Constraints:
range: 1
 .1.3.6.1.4.1.2011.5.106.1.5.1.1