ancpAnSessionConfigCvid
HUAWEI-ANCP-AN-MIB ·
.1.3.6.1.4.1.2011.5.106.1.3.1.19
Object
If the session is associated with two VLANs, has both S-VLAN tag and C-VLAN tag, this object contains the VLAN ID of the inner VLAN tag (also called C-VLAN ID). In such a case the value of this object SHOULD be nonzero. If the session is not associated with any VLAN or if it is associated with a single VLAN, this object MUST have the default value 0. The value of this object is persistent.
Context
- MIB
- HUAWEI-ANCP-AN-MIB
- OID
.1.3.6.1.4.1.2011.5.106.1.3.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ancpAnSessionConfigEntry
- Table
- ancpAnSessionConfigTable
- Siblings
- 24
Syntax
Q-BRIDGE-MIBVlanIdOrNone
- Source
- Q-BRIDGE-MIBVlanIdOrNone
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ancpAnSessionConfigSessionId An index of a session referred by this row. The index
is unique across all partitions.
The referred session may be actually established or
just potential.
Prior to creating a row … | column | Unsigned32 | .1.3.6.1.4.1.2011.5.106.1.3.1.1 |
| ancpAnSessionConfigTransportRetryTimer The timer specifies the nominal time between 2 transport
connection setup attempts done by the access node.
The transport protocol is specified in
ancpAnSessionConfigEncapsulation… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.2011.5.106.1.3.1.10 |
| ancpAnSessionConfigAncpRetryTimer The timer specifies the nominal time between
2 ANCP connection setup attempts.
The timer is specified in units of 100ms.
A value 0 means that the access node will NOT
spontaneousl… | column | deciseconds Unsigned32 | .1.3.6.1.4.1.2011.5.106.1.3.1.11 |
| ancpAnSessionConfigAnName The name of the access node. The first three octets must
be an Organizationally Unique Identifier (OUI) that
identifies the manufacturer of the access node. This
object can be (on… | column | GSMP-MIBGsmpNameType | .1.3.6.1.4.1.2011.5.106.1.3.1.12 |
| ancpAnSessionConfigPartitionId The Id for this session's specific access node partition.
This object has a meaning only if partitions are used
(ancpAnPartitionsUsed='true') and is ignored
otherwise.
The value o… | column | GSMP-MIBGsmpPartitionIdType | .1.3.6.1.4.1.2011.5.106.1.3.1.13 |
| ancpAnSessionConfigWindowSize The maximum number of unacknowledged request messages
that may be transmitted by the controller without the
possibility of loss. This field is used to prevent
request messages fro… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.106.1.3.1.14 |
| ancpAnSessionConfigRelatedInterface This object contains the value of an ifIndex object,
defined in IF-MIB, indicating an interface corresponding
to this session.
The corresponding interface might be either physical… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.106.1.3.1.15 |
| ancpAnSessionConfigRelatedEntity This object contains the name of an object instance
uniquely identifying a lower layer entity associated
with this session. For example, in the case where
the session is associat… | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.2011.5.106.1.3.1.16 |
| ancpAnSessionConfigSvid If the session is associated with a single VLAN, this
object contains the VLAN ID of the single VLAN tag. If
ancpAnSessionConfigCvid is also nonzero then the session
is associated… | column | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.2011.5.106.1.3.1.17 |
| ancpAnSessionConfigSPrio If the session is associated with a single VLAN, this
object contains the priority value of the single VLAN tag.
If ancpAnSessionConfigCvid is also nonzero then the
session is ass… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.106.1.3.1.18 |
| ancpAnSessionConfigRowStatus An object that allows entries in this table to
be created, modified and deleted using the RowStatus
convention.
A SET operation to any other attribute in this row, when
this objec… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.106.1.3.1.2 |
| ancpAnSessionConfigCPrio If the session is associated with two VLANs, has both
S-VLAN tag and C-VLAN tag, this object contains the
priority value of the inner VLAN tag (also called C-VLAN
priority). In su… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.106.1.3.1.20 |
| ancpAnSessionConfigNasIpAddressType The type of address in ancpAnSessionConfigNasIpAddress.
The value of this object is persistent. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.106.1.3.1.21 |
| ancpAnSessionConfigNasIpAddress The IP address used for the ANCP session peer (NAS).
The type of this IP address attribute is determined
by the value of ancpAnSessionConfigNasIpAddressType.
The value of this obj… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.106.1.3.1.22 |
| ancpAnSessionConfigEncapPortNumber The port number used for the transport protocol
establishment to the ANCP peer. The transport
protocol type is specified by
ancpAnSessionConfigEncapsulationType and as
it is set b… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.106.1.3.1.23 |
| ancpAnSessionConfigNotifyDnEnable This object specifies if ancpAnSessionDown
notification should be generated when this session
leaves the 'estab' state as given by
ancpAnCurrentSessionState in the corresponding r… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.106.1.3.1.24 |
| ancpAnSessionConfigNotifyUpEnable This object specifies if ancpAnSessionUp
notification should be generated when this session
goes to 'estab' state as given by
ancpAnCurrentSessionState in the corresponding row
in… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.106.1.3.1.25 |
| ancpAnSessionConfigGsmpVersion The maximum version number of the GSMP protocol that
may be used in this session. The value of this object
is persistent. | column | GSMP-MIBGsmpVersion | .1.3.6.1.4.1.2011.5.106.1.3.1.3 |
| ancpAnSessionConfigGsmpSubVersion The maximum subversion number of the GSMP protocol that
may be used in this session. The value of this object
is persistent. | column | HUAWEI-ANCP-TC-MIBGsmpSubVersion | .1.3.6.1.4.1.2011.5.106.1.3.1.4 |
| ancpAnSessionConfigEncapsulationType Required encapsulation for this session. The value of
this object is persistent.
Options:
1. tcp(1) -indicates that the type is tcp. | column | Enumeration | .1.3.6.1.4.1.2011.5.106.1.3.1.5 |
| ancpAnSessionConfigCapabilities ANCP capabilities supported by the AN in this session.
When all bits are set to zero then this means that no
capabilities are supported. The value of this object
is persistent. | column | HUAWEI-ANCP-TC-MIBAncpSessionCapabilities | .1.3.6.1.4.1.2011.5.106.1.3.1.6 |
| ancpAnSessionConfigAliveTimer The timer specifies the nominal time between periodic
adjacency protocol messages generated by the access node.
It is a constant for the duration of an ANCP session. The
timer is … | column | deciseconds Unsigned32 | .1.3.6.1.4.1.2011.5.106.1.3.1.7 |
| ancpAnSessionConfigPortReportShaper The timer specifies the nominal time between
2 EventReport messages related to the same port.
It is a constant for the duration of a GSMP session.
The timer is specified in units … | column | deciseconds Unsigned32 | .1.3.6.1.4.1.2011.5.106.1.3.1.8 |
| ancpAnSessionConfigAggregateReportShaper The timer specifies the nominal time between
2 EventReport messages related to any port.
It is a constant for the duration of a GSMP session.
The timer is specified in units of 10… | column | centiseconds Unsigned32 | .1.3.6.1.4.1.2011.5.106.1.3.1.9 |