HP-ICF-TRANSCEIVER-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
71
hpicfXcvrInfoTable
table.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1
·
1 row entry
·
65 columns
A table of objects that display transceiver characteristics.
A set of objects that displays information of
a transceiver.
a transceiver.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hpicfXcvrPortIndex
The interface number for this entry.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrPortDesc
A textual description of the interface.
|
OctetString Constraints: range: 1-8 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrModel
A textual description of the transceiver
model number. |
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrSerial
A textual description of the transceiver
serial number. |
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.4 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrType
A textual description of the transceiver type.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.5 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrConnectorType
A textual description of the transceiver
connector type. |
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.6 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrWavelength
A textual description of the central optical
wavelength. n/a will be reported for copper transceivers. |
OctetString Constraints: range: 1-96 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.7 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrTxDist
A textual description of the link length
supported by the transceiver. |
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.8 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrDiagnostics
This object indicates transceiver diagnostic support.
May be one of Virtual Cable Test (VCT), Diagnostic Optical Monitoring (DOM), other or none. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.9 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrDiagnosticsUpdate
This object will cause specific actions
depending on the diagnostic support of the transceiver. Transceiver Diagnostic support: None : No action taken. DOM : Will update diagnostic infor… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.10 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrTemp
This is transceiver internal temperature
in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. The value of this object is valid when the value of the hpicfXcv… |
thousandths of degrees CelsiusSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.11 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrVoltage
This is transceiver supply voltage
in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Will be zero if the transceiver does not report this object. The value of … |
hundreds of microvoltsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.12 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrBias
This is Tx bias current in microamps.
The value of this object is valid when the value of the hpicfXcvrDiagnostics object is DOM. |
microampsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.13 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrTxPower
This is transmit output power
in thousandths of dBm. As an example: -5840 is -5.840dBm. -in dBm (0 microwatts) will be reported as -99999999. The value of this object is vali… |
thousandths of dBmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.14 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrRxPower
This is received optical power
in thousandths of dBm. As an example: -5840 is -5.840dBm. -in dBm (0 microwatts) will be reported as -99999999. The value of this object is val… |
thousandths of dBmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.15 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrAlarms
Bitmask indicating transceiver alarms,
Rx power low warning(0) Rx power high warning(1) Tx power low warning(2) Tx power high warning(3) Tx bias low warning(4) Tx bias high warning(5) Vcc low warning(6) Vcc high warning… |
Bits Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.16 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrErrors
Bitmask indicating transceiver errors.
Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration mismatch(2) Transceiver type not supported by port hardware(3… |
Bits Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.17 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrTempHiAlarm
Transceiver temperature high alarm
threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. The value of this object is valid when the value of th… |
thousandths of degrees CelsiusSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.18 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrTempLoAlarm
Transceiver temperature low alarm
threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. The value of this object is valid when the value of the… |
thousandths of degrees CelsiusSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.19 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrTempHiWarn
Transceiver temperature high warning
threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. The value of this object is valid when the value of … |
thousandths of degrees CelsiusSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.20 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrTempLoWarn
Transceiver temperature low warning
threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius. The value of this object is valid when the value of t… |
thousandths of degrees CelsiusSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.21 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrVccHiAlarm
Transceiver VCC high alarm
threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. The value of thi… |
hundreds of microvoltsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.22 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrVccLoAlarm
Transceiver VCC low alarm
threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. The value of this… |
hundreds of microvoltsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.23 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrVccHiWarn
Transceiver VCC high warning
threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. The value of t… |
hundreds of microvoltsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.24 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrVccLoWarn
Transceiver VCC low warning
threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver. The value of th… |
hundreds of microvoltsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.25 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrBiasHiAlarm
Transceiver bias high alarm
threshold limit in microamps. The value of this object is valid when the value of the hpicfXcvrDiagnostics object is DOM. |
microampsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.26 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrBiasLoAlarm
Transceiver bias low alarm
threshold limit in microamps. The value of this object is valid when the value of the hpicfXcvrDiagnostics object is DOM. |
microampsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.27 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrBiasHiWarn
Transceiver bias high warning
threshold limit in microamps. The value of this object is valid when the value of the hpicfXcvrDiagnostics object is DOM. |
microampsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.28 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrBiasLoWarn
Transceiver bias low warning
threshold limit in microamps. The value of this object is valid when the value of the hpicfXcvrDiagnostics object is DOM. |
microampsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.29 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrPwrOutHiAlarm
Transceiver transmit power high alarm
threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of the hpicfXcvrDiagnos… |
tenths of microwattsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.30 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrPwrOutLoAlarm
Transceiver transmit power low alarm
threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of the hpicfXcvrDiagnost… |
tenths of microwattsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.31 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrPwrOutHiWarn
Transceiver transmit power high warning
threshold limit in tenths of microwatts As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of the hpicfXcvrDiagno… |
tenths of microwattsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.32 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrPwrOutLoWarn
Transceiver transmit power low warning
threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of the hpicfXcvrDiagno… |
tenths of microwattsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.33 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrRcvPwrHiAlarm
Transceiver receive power high alarm
threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of the hpicfXcvrDiagnost… |
tenths of microwattsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.34 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrRcvPwrLoAlarm
Transceiver receive power low alarm
threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of the hpicfXcvrDiagnosti… |
tenths of microwattsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.35 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrRcvPwrHiWarn
Transceiver receive power high warning
threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of the hpicfXcvrDiagno… |
tenths of microwattsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.36 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrRcvPwrLoWarn
Transceiver receive power low warning
threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt. The value of this object is valid when the value of the hpicfXcvrDiagnos… |
tenths of microwattsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.37 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrDiagnosticsTimeStamp
deprecated
********* THIS OBJECT IS DEPRECATED *********
A textual description of the diagnostics information updated for the last time in the transceiver. This object has been deprecated. Its functio… |
OctetString Constraints: range: 1-64 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.38 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrPhyLinkStatus
This object indicates the link status as reported
by the physical entity. The value of this object is valid when the value of the hpicfXcvrDiagnostics object is VCT or other. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.39 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrPhySpeed
This object indicates the speed in Mbps as reported
by the physical entity. Will be zero if speed and duplex are unresolved. The value of this object is valid when the value of the hpicfX… |
megabits per secondUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.40 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrPhyDuplex
This object indicates the duplex as reported by
the physical entity. Will be unspecified if speed and duplex are unresolved. The value of this object is valid when the value of the hpicfXc… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.41 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairACableStatus
This object indicates the diagnostics
test status on the cable pair. Normal = No cable fault detected. Open = Lack of continuity between ends. Short = Short detected. Impedance mismatch = - Cable p… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.42 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairACableLength
This object indicates the cable pair length in
meters as reported by cable diagnostics. A gigabit link must be present for this object to be non zero. Will be zero if not available or the t… |
metersUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.43 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairADistanceToFault
This object indicates the distance in meters to
a fault in the cable pair as reported through cable diagnostics. Will be zero if no fault or the transceiver does not report this object. Ac… |
metersUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.44 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairAPolaritySwap
This object indicates if the cable pair connected
to the phy is inverted as reported through cable diagnostics. Will be unspecified if the this object is unavailable or not reported. The va… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.45 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairASkew
This object indicates the delay skew in nanoseconds
of this cable pair and the fastest cable pair as reported through cable diagnostics. Will be zero if the lowest of the pairs or if the transceiver does… |
nanosecondsUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.46 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairBCableStatus
This object indicates the cable diagnostics
test status on the cable pair. Normal = No cable fault detected. Open = Lack of continuity between ends. Short = Short detected. Impedance mismatch = - C… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.47 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairBCableLength
This object indicates the cable pair length in
meters as reported by cable diagnostics. A gigabit link must be present for this object to be non zero. Will be zero if not available or the … |
metersUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.48 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairBDistanceToFault
This object indicates the distance in meters to
a fault in the cable pair as reported through cable diagnostics. Will be zero if no fault or the transceiver does not report this object. Ac… |
metersUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.49 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairBPolaritySwap
This object indicates if the cable pair connected
to the phy were inverted as reported through cable diagnostics. Will be unspecified if the this object is unavailable or not reported. The … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.50 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairBSkew
This object indicates the delay skew in nanoseconds
of this cable pair and the fastest cable pair as reported through cable diagnostics. Will be zero if the lowest of the pairs or if the transceiver does… |
nanosecondsUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.51 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairCCableStatus
This object indicates the cable diagnostics
test status on the cable pair. Normal = No cable fault detected. Open = Lack of continuity between ends. Short = Short detected. Impedance Mismatch = - C… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.52 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairCCableLength
This object indicates the cable length in meters
of the cable pair as reported through cable diagnostics. A gigabit link must be present for this object to be non zero. Will be zero if not… |
metersUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.53 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairCDistanceToFault
This object indicates the distance in meters to
a fault in the cable pair as reported through cable diagnostics. Will be zero if there is no fault or the transceiver does not report this object. … |
metersUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.54 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairCPolaritySwap
This object indicates if the cable pair connected
to the phy were inverted as reported through cable diagnostics. Will be unspecified if the this object is unavailable or not reported. The … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.55 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairCSkew
This object indicates the delay skew in nanoseconds
of this cable pair and the fastest cable pair as reported through cable diagnostics. Will be zero if the lowest of the pairs or if the transceiver does… |
nanosecondsUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.56 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairDCableStatus
This object indicates the cable diagnostics
test status on the cable pair. Normal = No cable fault detected. Open = Lack of continuity between ends. Short = Short detected. Impedance Mismatch = - C… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.57 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairDCableLength
This object indicates the cable length in meters
of the cable pair as reported through cable diagnostics. A gigabit link must be present for this object to be non zero. Will be zero if not… |
metersUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.58 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairDDistanceToFault
This object indicates the distance in meters to
a fault in the cable pair as reported through cable diagnostics. Will be zero if no fault or the transceiver does not report this object. Ac… |
metersUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.59 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairDPolaritySwap
This object indicates if the cable pair connected
to the phy were inverted as reported through cable diagnostics. Will be unspecified if the this object is unavailable or not reported. The … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.60 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairDSkew
This object indicates the delay skew in nanoseconds
of this cable pair and the fastest cable pair as reported through cable diagnostics. Will be zero if the lowest of the pairs or if the transceiver does… |
nanosecondsUnsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.61 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairABSwap
This object indicates the if the channels are
swapped for channels A and B as reported through cable diagnostics. MDI : Channel A received on MDI[1], Channel B on MDI[0] MDIX : Channel A received on MDI[… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.62 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrMdiPairCDSwap
This object indicates if the channels are
swapped for channels C and D as reported through cable diagnostics. MDI : Channel C received on MDI[3], Channel D on MDI[2] MDIX : Channel C received on MDI[2], … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.63 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrDiagnosticsTimeTicks
The value of sysUpTime of when this diagnostic
information was last updated. If this diagnostic information was never updated, then this object will contain a zero value. |
centi-secondsSNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.64 |
||||||||||||||||||||||||||||||||||||||||
|
hpicfXcvrManufacDate
A textual description of the transceiver
Manufacturing date. |
OctetString Constraints: range: 1-16 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.65 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.2
·
1 row entry
·
6 columns
A table of objects that displays the transceiver channel characteristics.
A set of objects that displays the information of
a transceiver channel.
a transceiver channel.
Indexes
IF-MIBifIndex hpicfXcvrChannel
| Column | Syntax | OID | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hpicfXcvrChannel
The channel number for this entry.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.2.1.1 |
||||||||||||||||||||||||
|
hpicfXcvrChannelTxBias
Tx bias current in microamps.
The value of this object is valid when the value of the hpicfXcvrDiagnostics object is DOM. |
microampsUnsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.2.1.2 |
||||||||||||||||||||||||
|
hpicfXcvrChannelTxPower
This is transmit output power
in thousandths of dBm. As an example: -5840 is -5.840dBm. Negative infinity dBm (0 microwatts) is reported as -99999999. The value of this objec… |
thousandths of dBmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.2.1.3 |
||||||||||||||||||||||||
|
hpicfXcvrChannelRxPower
Received optical power in thousandths of dBm.
As an example: -5840 is -5.840dBm. Negative infinity dBm (0 microwatts) is reported as -99999999. The value of this object is va… |
thousandths of dBmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.2.1.4 |
||||||||||||||||||||||||
|
hpicfXcvrChannelAlarms
Bitmask indicating transceiver channel alarms,
Rx power low warning(0) Rx power high warning(1) Tx power low warning(2) Tx power high warning(3) Tx bias low warning(4) Tx bias high warning(5) Rx power low alarm(6) Rx po… |
Bits Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.2.1.5 |
||||||||||||||||||||||||
|
hpicfXcvrChannelErrors
TX fault(0)
TX loss of signal(1) RX loss of signal(2) Unused(3-31) The value of this object is valid when the value of the hpicfXcvrDiagnostics object is DOM. |
Bits Enumerated Values:
|
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.2.1.6 |