hpicfXcvrRxPower
HP-ICF-TRANSCEIVER-MIB ·
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.15
Object
This is received optical power
in thousandths of dBm.
As an example: -5840 is -5.840dBm.
-in dBm (0 microwatts) will be reported as -99999999.
The value of this object is valid when the value of
the hpicfXcvrDiagnostics object is DOM.
Context
- MIB
- HP-ICF-TRANSCEIVER-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.15- Type
- column
- Access
- readonly
- Status
- current
- Units
- thousandths of dBm
- Parent
- hpicfXcvrInfoEntry
- Table
- hpicfXcvrInfoTable
- Siblings
- 64
Syntax
thousandths of dBm SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfXcvrPortIndex The interface number for this entry. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.1 |
| hpicfXcvrDiagnosticsUpdate This object will cause specific actions
depending on the diagnostic support of the
transceiver.
Transceiver Diagnostic support:
None : No action tak… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.10 |
| hpicfXcvrTemp This is transceiver internal temperature
in thousandths of degrees Celsius.
As an example: 49120 is 49.120 degrees Celsius.
The value of this object … | column | thousandths of degrees Celsius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.11 |
| hpicfXcvrVoltage This is transceiver supply voltage
in hundreds of microvolts.
As an example: 32928 is 3.2928 volts.
Will be zero if the transceiver does not report
t… | column | hundreds of microvolts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.12 |
| hpicfXcvrBias This is Tx bias current in microamps.
The value of this object is valid when the value of
the hpicfXcvrDiagnostics object is DOM. | column | microamps Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.13 |
| hpicfXcvrTxPower This is transmit output power
in thousandths of dBm.
As an example: -5840 is -5.840dBm.
-in dBm (0 microwatts) will be reported as -99999999.
… | column | thousandths of dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.14 |
| hpicfXcvrAlarms Bitmask indicating transceiver alarms,
Rx power low warning(0)
Rx power high warning(1)
Tx power low warning(2)
Tx power high warning(3)
Tx bias low warning(4)
Tx bias high warnin… | column | Bits | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.16 |
| hpicfXcvrErrors Bitmask indicating transceiver errors.
Transceiver information I/O error(0)
Transceiver information checksum error(1)
Transceiver type and port configuration mismatch(2)
Transceiv… | column | Bits | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.17 |
| hpicfXcvrTempHiAlarm Transceiver temperature high alarm
threshold limit in thousandths of degrees Celsius.
As an example: 49120 is 49.120 degrees Celsius.
The value of th… | column | thousandths of degrees Celsius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.18 |
| hpicfXcvrTempLoAlarm Transceiver temperature low alarm
threshold limit in thousandths of degrees Celsius.
As an example: 49120 is 49.120 degrees Celsius.
The value of thi… | column | thousandths of degrees Celsius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.19 |
| hpicfXcvrPortDesc A textual description of the interface. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.2 |
| hpicfXcvrTempHiWarn Transceiver temperature high warning
threshold limit in thousandths of degrees Celsius.
As an example: 49120 is 49.120 degrees Celsius.
The value of … | column | thousandths of degrees Celsius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.20 |
| hpicfXcvrTempLoWarn Transceiver temperature low warning
threshold limit in thousandths of degrees Celsius.
As an example: 49120 is 49.120 degrees Celsius.
The value of t… | column | thousandths of degrees Celsius SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.21 |
| hpicfXcvrVccHiAlarm Transceiver VCC high alarm
threshold limit in hundreds of microvolts.
As an example: 32928 is 3.2928 volts.
Returns zero if not supported on the tran… | column | hundreds of microvolts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.22 |
| hpicfXcvrVccLoAlarm Transceiver VCC low alarm
threshold limit in hundreds of microvolts.
As an example: 32928 is 3.2928 volts.
Returns zero if not supported on the trans… | column | hundreds of microvolts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.23 |
| hpicfXcvrVccHiWarn Transceiver VCC high warning
threshold limit in hundreds of microvolts.
As an example: 32928 is 3.2928 volts.
Returns zero if not supported on the tr… | column | hundreds of microvolts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.24 |
| hpicfXcvrVccLoWarn Transceiver VCC low warning
threshold limit in hundreds of microvolts.
As an example: 32928 is 3.2928 volts.
Returns zero if not supported on the tra… | column | hundreds of microvolts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.25 |
| hpicfXcvrBiasHiAlarm Transceiver bias high alarm
threshold limit in microamps.
The value of this object is valid when the value of
the hpicfXcvrDiagnostics object is DOM. | column | microamps Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.26 |
| hpicfXcvrBiasLoAlarm Transceiver bias low alarm
threshold limit in microamps.
The value of this object is valid when the value of
the hpicfXcvrDiagnostics object is DOM. | column | microamps Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.27 |
| hpicfXcvrBiasHiWarn Transceiver bias high warning
threshold limit in microamps.
The value of this object is valid when the value of
the hpicfXcvrDiagnostics object is DOM. | column | microamps Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.28 |
| hpicfXcvrBiasLoWarn Transceiver bias low warning
threshold limit in microamps.
The value of this object is valid when the value of
the hpicfXcvrDiagnostics object is DOM. | column | microamps Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.29 |
| hpicfXcvrModel A textual description of the transceiver
model number. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.3 |
| hpicfXcvrPwrOutHiAlarm Transceiver transmit power high alarm
threshold limit in tenths of microwatts.
As an example: 10000 is 1 milliwatt.
The value of this object is valid… | column | tenths of microwatts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.30 |
| hpicfXcvrPwrOutLoAlarm Transceiver transmit power low alarm
threshold limit in tenths of microwatts.
As an example: 10000 is 1 milliwatt.
The value of this object is valid … | column | tenths of microwatts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.31 |
| hpicfXcvrPwrOutHiWarn Transceiver transmit power high warning
threshold limit in tenths of microwatts
As an example: 10000 is 1 milliwatt.
The value of this object is vali… | column | tenths of microwatts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.32 |
| hpicfXcvrPwrOutLoWarn Transceiver transmit power low warning
threshold limit in tenths of microwatts.
As an example: 10000 is 1 milliwatt.
The value of this object is vali… | column | tenths of microwatts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.33 |
| hpicfXcvrRcvPwrHiAlarm Transceiver receive power high alarm
threshold limit in tenths of microwatts.
As an example: 10000 is 1 milliwatt.
The value of this object is valid … | column | tenths of microwatts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.34 |
| hpicfXcvrRcvPwrLoAlarm Transceiver receive power low alarm
threshold limit in tenths of microwatts.
As an example: 10000 is 1 milliwatt.
The value of this object is valid w… | column | tenths of microwatts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.35 |
| hpicfXcvrRcvPwrHiWarn Transceiver receive power high warning
threshold limit in tenths of microwatts.
As an example: 10000 is 1 milliwatt.
The value of this object is vali… | column | tenths of microwatts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.36 |
| hpicfXcvrRcvPwrLoWarn Transceiver receive power low warning
threshold limit in tenths of microwatts.
As an example: 10000 is 1 milliwatt.
The value of this object is valid… | column | tenths of microwatts Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.37 |
| hpicfXcvrDiagnosticsTimeStamp deprecated ********* THIS OBJECT IS DEPRECATED *********
A textual description of the diagnostics
information updated for the last time in the
transceiver.
This… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.38 |
| hpicfXcvrPhyLinkStatus This object indicates the link status as reported
by the physical entity.
The value of this object is valid when the value of
the hpicfXcvrDiagnostics object is VC… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.39 |
| hpicfXcvrSerial A textual description of the transceiver
serial number. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.4 |
| hpicfXcvrPhySpeed This object indicates the speed in Mbps as reported
by the physical entity.
Will be zero if speed and duplex are unresolved.
The value of this objec… | column | megabits per second Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.40 |
| hpicfXcvrPhyDuplex This object indicates the duplex as reported by
the physical entity.
Will be unspecified if speed and duplex are unresolved.
The value of this object… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.41 |
| hpicfXcvrMdiPairACableStatus This object indicates the diagnostics
test status on the cable pair.
Normal = No cable fault detected.
Open = Lack of continuity between ends.
Short = Short detecte… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.42 |
| hpicfXcvrMdiPairACableLength This object indicates the cable pair length in
meters as reported by cable diagnostics.
A gigabit link must be present for this object
to be non zero.
… | column | meters Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.43 |
| hpicfXcvrMdiPairADistanceToFault This object indicates the distance in meters to
a fault in the cable pair as reported through cable
diagnostics.
Will be zero if no fault or the transceiver does no… | column | meters Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.44 |
| hpicfXcvrMdiPairAPolaritySwap This object indicates if the cable pair connected
to the phy is inverted as reported through cable
diagnostics.
Will be unspecified if the this object is unavailabl… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.45 |
| hpicfXcvrMdiPairASkew This object indicates the delay skew in nanoseconds
of this cable pair and the fastest cable pair as
reported through cable diagnostics.
Will be zero if the lowest… | column | nanoseconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.46 |
| hpicfXcvrMdiPairBCableStatus This object indicates the cable diagnostics
test status on the cable pair.
Normal = No cable fault detected.
Open = Lack of continuity between ends.
Short = Short d… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.47 |
| hpicfXcvrMdiPairBCableLength This object indicates the cable pair length in
meters as reported by cable diagnostics.
A gigabit link must be present for this object
to be non zero.
… | column | meters Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.48 |
| hpicfXcvrMdiPairBDistanceToFault This object indicates the distance in meters to
a fault in the cable pair as reported through cable
diagnostics.
Will be zero if no fault or the transceiver does no… | column | meters Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.49 |
| hpicfXcvrType A textual description of the transceiver type. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.5 |
| hpicfXcvrMdiPairBPolaritySwap This object indicates if the cable pair connected
to the phy were inverted as reported through cable
diagnostics.
Will be unspecified if the this object is unavaila… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.50 |
| hpicfXcvrMdiPairBSkew This object indicates the delay skew in nanoseconds
of this cable pair and the fastest cable pair as
reported through cable diagnostics.
Will be zero if the lowest… | column | nanoseconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.51 |
| hpicfXcvrMdiPairCCableStatus This object indicates the cable diagnostics
test status on the cable pair.
Normal = No cable fault detected.
Open = Lack of continuity between ends.
Short = Short d… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.52 |
| hpicfXcvrMdiPairCCableLength This object indicates the cable length in meters
of the cable pair as reported through cable
diagnostics.
A gigabit link must be present for this object
to be non … | column | meters Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.53 |
| hpicfXcvrMdiPairCDistanceToFault This object indicates the distance in meters to
a fault in the cable pair as reported through cable
diagnostics.
Will be zero if there is no fault or the
transceiv… | column | meters Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.54 |
| hpicfXcvrMdiPairCPolaritySwap This object indicates if the cable pair connected
to the phy were inverted as reported through cable
diagnostics.
Will be unspecified if the this object is unavaila… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.55 |
| hpicfXcvrMdiPairCSkew This object indicates the delay skew in nanoseconds
of this cable pair and the fastest cable pair as
reported through cable diagnostics.
Will be zero if the lowest… | column | nanoseconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.56 |
| hpicfXcvrMdiPairDCableStatus This object indicates the cable diagnostics
test status on the cable pair.
Normal = No cable fault detected.
Open = Lack of continuity between ends.
Short = Short d… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.57 |
| hpicfXcvrMdiPairDCableLength This object indicates the cable length in meters
of the cable pair as reported through cable
diagnostics.
A gigabit link must be present for this object
to be non … | column | meters Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.58 |
| hpicfXcvrMdiPairDDistanceToFault This object indicates the distance in meters to
a fault in the cable pair as reported through cable
diagnostics.
Will be zero if no fault or the transceiver does no… | column | meters Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.59 |
| hpicfXcvrConnectorType A textual description of the transceiver
connector type. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.6 |
| hpicfXcvrMdiPairDPolaritySwap This object indicates if the cable pair connected
to the phy were inverted as reported through cable
diagnostics.
Will be unspecified if the this object is unavaila… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.60 |
| hpicfXcvrMdiPairDSkew This object indicates the delay skew in nanoseconds
of this cable pair and the fastest cable pair as
reported through cable diagnostics.
Will be zero if the lowest… | column | nanoseconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.61 |
| hpicfXcvrMdiPairABSwap This object indicates the if the channels are
swapped for channels A and B as reported through
cable diagnostics.
MDI : Channel A received on MDI[1], Channel B on … | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.62 |
| hpicfXcvrMdiPairCDSwap This object indicates if the channels are
swapped for channels C and D as reported through
cable diagnostics.
MDI : Channel C received on MDI[3], Channel D on MDI[… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.63 |
| hpicfXcvrDiagnosticsTimeTicks The value of sysUpTime of when this diagnostic
information was last updated. If this diagnostic
information was never updated, then this object
will contain a zero value. | column | centi-seconds SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.64 |
| hpicfXcvrManufacDate A textual description of the transceiver
Manufacturing date. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.65 |
| hpicfXcvrWavelength A textual description of the central optical
wavelength.
n/a will be reported for copper transceivers. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.7 |
| hpicfXcvrTxDist A textual description of the link length
supported by the transceiver. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.8 |
| hpicfXcvrDiagnostics This object indicates transceiver diagnostic support.
May be one of Virtual Cable Test (VCT), Diagnostic
Optical Monitoring (DOM), other or none. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.82.1.1.1.1.9 |