HP-ICF-RATE-LIMIT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
47

hpICMPRateLimitPortConfigTable

table
.1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1 · 1 row entry · 7 columns
Open in standard view 
A table that contains configuration objects on ICMP 
rate limit on a per interface basis.
hpICMPRateLimitPortConfigEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1
Entry that contains configuration objects on ICMP
rate limit on a per interface basis
Indexes
hpICMPRateLimitPortConfigIndex
Column Syntax OID
hpICMPRateLimitPortConfigIndex
The interface index associated with this entry.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.1
hpICMPRateLimitPortState deprecated
This object indicates whether ICMP rate limiting is
enabled on the corresponding port.

Because this is a State object it cannot distinguish
between percent-based ICMP Rate-Limiting and the newer
Kbps-base…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.2
hpICMPRateLimitPortPrct
This indicates the percent of ICMP rate limit on
the port. The value of this object must be
interpreted under the context of
hpICMPRateLimitPortState. A value of 0 is not the
same as disabling, but rather all ICMP …
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.3
hpICMPRateLimitPortAlarmFlag
This object indicates whether ICMP rate limiting
alarm has been sent. When an alarm is sent, this
object is set to set(2). Once a management station
changes this object to clear(1), an alarm can be
sent again for thi…
Enumerationr/w
Enumerated Values:
1clear
2set
 .1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.4
hpICMPRateLimitPortKbps
The maximum Kilobits-per-second of ICMP traffic that may
be received inbound on the port. The value of this
object must be interpreted under the context of
hpICMPRateLimitControlMode. A value of 0 is not the
same a…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.5
hpICMPRateLimitPortControlMode
The mode by which inbound ICMP traffic on this port will
Rate-Limited. If icmpRateLimitPerPortOnly is configured,
there will be a single maximum percentage-based rate for
the entire port. If icmpRateLimitPerPortOnly…
Enumerationr/w
Enumerated Values:
1disabled
2portPrct
3portKbps
 .1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.6
hpICMPRateLimitPortIpPacketType
This object represents the type(s) of IP packet to which
the specified ICMP rate-limit will be applied. The
default is IPv4.
Enumerationr/w
Enumerated Values:
1ipv4PacketsOnly
2ipv6PacketsOnly
3ipv4AndIpv6Packets
 .1.3.6.1.4.1.11.2.14.10.2.14.1.1.1.1.1.7

hpBWMinEgressPortPrctTable

table
.1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.2 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the port's egress
Guaranteed Minimum Bandwidth percent configurations on
this switch.  The number of entries in this table is 
determined by hpBWMinEgressPortNumQueues.  The priority of 
the queues is in ascending order, starting with queue one 
being the lowest and queue hpBWMinEgressPortNumQueues 
being the highest.
hpBWMinEgressPortPrctEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.2.1
The information associated with each port's egress
Guaranteed Minimum Bandwidth percent configuration.
Indexes
IF-MIBifIndex hpBWMinEgressPortPrctQueue
Column Syntax OID
hpBWMinEgressPortPrctQueue
The queue associated with this entry. The priority of
the queues is in ascending order, starting with queue one
being the lowest and queue hpBWMinEgressPortNumQueues
being the highest.
Integer32
Constraints:
range: 1-9000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.2.1.1
hpBWMinEgressPortPrct
The percentage of Guaranteed Minimum bandwidth to be
assigned to this egress queue for this port. Total values
for all queues must not exceed 100 percent.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.10.2.14.1.2.1.2.1.2

hpBWMinIngressPortPrctTable

table
.1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.2 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the port's
ingress Guaranteed Minimum Bandwidth percent 
configurations on this switch.  The number of entries in 
this table is determined by hpBWMinIngressPortNumQueues.  
The priority of the queues is in ascending order, starting 
with queue one being the lowest and queue 
hpBWMinIngressPortNumQueues being the highest.
hpBWMinIngressPortPrctEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.2.1
The information associated with each port's ingress
Guaranteed Minimum Bandwidth percent configuration.
Indexes
IF-MIBifIndex hpBWMinIngressPortPrctQueue
Column Syntax OID
hpBWMinIngressPortPrctQueue
The queue associated with this entry. The priority of
the queues is in ascending order, starting with queue one
being the lowest and queue hpBWMinIngressPortNumQueues
being the highest.
Integer32
Constraints:
range: 1-9000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.2.1.1
hpBWMinIngressPortPrct
The percentage of Guaranteed Minimum bandwidth to be
assigned to this ingress queue for this port. Total values
for all queues must not exceed 100 percent.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.10.2.14.1.3.1.2.1.2

hpEgressRateLimitPortConfigTable

table
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2 · 1 row entry · 6 columns
Open in standard view 
A table that contains information about the port egress 
Rate-Limiting configurations on this switch.
hpEgressRateLimitPortConfigEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1
The information associated with each port's egress
Rate-Limiting configuration.
Indexes
hpEgressRateLimitPortIndex
Column Syntax OID
hpEgressRateLimitPortIndex
The ifIndex value which uniquely identifies a row in the
Interfaces Table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.1
hpEgressRateLimitPortControlMode
The mode by which this port will be Rate-Limited on
egress. If egressRateLimitPerPortOnly is configured, there
will be a single maximum percentage-based rate for the
entire port. If egressRateLimitPerQueue is configur…
Enumerationr/w
Enumerated Values:
1disabled
2egressRateLimitPerPortOnly
3egressRateLimitPerQueue
4egressRateLimitPerPortOnlyBpsMode
5egressRateLimitPerQueueBpsMode
6egressRateLimitPerPortOnlyKbpsMode
 .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.2
hpEgressRateLimitPortSingleControlPrct
When hpEgressRateLimitPortControlMode is configured
for egressRateLimitPerPortOnly, this value is the maximum
percentage of traffic that may be transmitted by this
port on egress.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.3
hpEgressRateLimitPortSingleControlBps deprecated
When hpEgressRateLimitPortControlMode is configured for
egressRateLimitPerPortOnlyBpsMode, this value is the
maximum bits-per-second of traffic that may be transmitted
by this port on egress.
Unsigned32r/w
Constraints:
range: 0-4200000000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.4
hpEgressRateLimitPortSingleControlKbps
When hpEgressRateLimitPortControlMode is configured for
egressRateLimitPerPortOnlyKbpsMode, this value is the
maximum kilobits-per-second of traffic that may be
transmitted by this port on egress.
Integer32r/w
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.5
hpEgressRateLimitPortQueueControlMode
The mode by which queues on this port will be rate-limited
on egress. If egressRateLimitQueuePrctMode is configured,
the values for each of the queues indicate the maximum
percentage of port traffic that may be transmit…
Enumerationr/w
Enumerated Values:
1disabled
2egressRateLimitQueuePrctMode
3egressRateLimitQueueKbpsMode
 .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.2.1.6

hpEgressRateLimitPortPrctTable

table
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.3 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the port egress 
Rate-Limiting percent configurations on this switch. The 
number of entries in this table is determined by 
hpEgressRateLimitPortNumQueues.  The priority of the 
queues is in ascending order, starting with queue one 
being the lowest priority and queue 
hpEgressRateLimitPortNumQueues being the highest 
priority.
hpEgressRateLimitPortPrctEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.3.1
The information associated with each port's egress
Rate-Limiting percent configuration.
Indexes
hpEgressRateLimitPortIndex hpEgressRateLimitPortPrctQueue
Column Syntax OID
hpEgressRateLimitPortPrctQueue
The queue associated with this entry. The priority o
of the queues is in ascending order, starting with
queue one being the lowest and queue
hpEgressRateLimitgressPortNumQueues being the highest.
Integer32
Constraints:
range: 1-9000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.3.1.1
hpEgressRateLimitPortPrct
The maximum percentage of traffic that may be
transmitted by this port's queue on egress.
hpEgressRateLimitPortControlMode must be configured to
use egressRateLimitPerQueue for this to take effect. A
value of 0-perce…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.3.1.2

hpEgressRateLimitPortBpsTable

table deprecated
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.4 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the port
egress Rate-Limiting bits-per-second configurations on this
switch.  The number of entries in this table is determined 
 by hpEgressRateLimitPortNumQueues. The priority of the 
 queues is in ascending order, starting with queue one 
being the lowest priority and queue 
hpEgressRateLimitPortNumQueues being the highest 
priority queue.
hpEgressRateLimitPortBpsEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.4.1
The information associated with each port's egress
Rate-Limiting bits-per-second configuration.
Indexes
hpEgressRateLimitPortIndex hpEgressRateLimitPortBpsQueue
Column Syntax OID
hpEgressRateLimitPortBpsQueue deprecated
The queue associated with this entry. The priority of
the queues is in ascending order, starting with queue one
being the lowest and queue
hpEgressRateLimitgressPortNumQueues being the highest.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.4.1.1
hpEgressRateLimitPortBps deprecated
The maximum bits-per-second of traffic that may be
transmitted by this port's queue on egress.
hpEgressRateLimitPortControlMode must be configured to use
egressRateLimitPerQueue for this to take effect. A value
of 0-…
Unsigned32r/w
Constraints:
range: 0-4200000000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.4.1.2

hpEgressRateLimitPortQueueConfigTable

table
.1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.5 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the port egress-
queue rate-limiting configurations on this switch.
hpEgressRateLimitPortQueueConfigEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.5.1
The information associated with the egress
rate-limiting configuration for the queues on each port.
Indexes
hpEgressRateLimitPortIndex hpEgressRateLimitPortQueueIndex
Column Syntax OID
hpEgressRateLimitPortQueueIndex
The queue associated with this entry. The priority
of the queues is in ascending order, starting with
queue one being the lowest and queue
hpEgressRateLimitEgressPortNumQueues being the highest.
Integer32
Constraints:
range: 1-9000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.5.1.1
hpEgressRateLimitPortQueueMax
The maximum amount of traffic that may be transmitted
by this port's corresponding queue on egress.
When the value of hpEgressRateLimitPortQueueControlMode
is egressRateLimitQueuePrctMode, this maximum value is a
percen…
Integer32r/w
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.4.1.5.1.2

hpIngressRateLimitPortConfigTable

table
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2 · 1 row entry · 5 columns
Open in standard view 
A table that contains information about the port ingress 
Rate-Limiting configurations on this switch.
hpIngressRateLimitPortConfigEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1
The information associated with each port's ingress
Rate-Limiting configuration.
Indexes
hpIngressRateLimitPortIndex
Column Syntax OID
hpIngressRateLimitPortIndex
The ifIndex value which uniquely identifies a row in the
Interfaces Table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.1
hpIngressRateLimitPortControlMode
The mode by which this port will be Rate-Limited on
ingress. If ingressRateLimitPerPortOnly is configured,
there will be a single maximum percentage-based rate for
the entire port. If ingressRateLimitPerQueue is
conf…
Enumerationr/w
Enumerated Values:
1disabled
2ingressRateLimitPerPortOnly
3ingressRateLimitPerQueue
4ingressRateLimitPerPortOnlyBpsMode
5ingressRateLimitPerQueueBpsMode
6ingressRateLimitPerPortOnlyKbpsMode
 .1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.2
hpIngressRateLimitPortSingleControlPrct
When hpIngressRateLimitPortControlMode is configured
for ingressRateLimitPerPortOnly, this value is the maximum
percentage of traffic that may be transmitted by this
port on egress.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.3
hpIngressRateLimitPortSingleControlBps deprecated
When hpIngressRateLimitPortControlMode is configured for
ingressRateLimitPerPortOnlyBpsMode, this value is the
maximum bits-per-second of traffic that may be transmitted
by this port on ingress.
Unsigned32r/w
Constraints:
range: 0-4200000000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.4
hpIngressRateLimitPortSingleControlKbps
When hpIngressRateLimitPortControlMode is configured for
ingressRateLimitPerPortOnlyKbpsMode, this value is the
maximum kilobits-per-second of traffic that may be
transmitted by this port on ingress.
Integer32r/w
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.2.1.5

hpIngressRateLimitPortPrctTable

table
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.3 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the port ingress 
Rate-Limiting percent configurations on this switch.  The 
number of entries in this table is determined by 
hpIngressRateLimitPortNumQueues.  The priority of the 
queues is in ascending order, starting with queue one 
being the lowest priority and queue 
hpIngressRateLimitPortNumQueues being the highest 
priority.
hpIngressRateLimitPortPrctEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.3.1
The information associated with each port's ingress
Rate-Limiting percent configuration.
Indexes
hpIngressRateLimitPortIndex hpIngressRateLimitPortPrctQueue
Column Syntax OID
hpIngressRateLimitPortPrctQueue
The queue associated with this entry. The priority
of the queues is in ascending order, starting with
queue one being the lowest and queue
hpIngressRateLimitgressPortNumQueues being the highest.
Integer32
Constraints:
range: 1-9000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.3.1.1
hpIngressRateLimitPortPrct
The maximum percentage of traffic that may be
transmitted by this port's queue on ingress.
hpIngressRateLimitPortControlMode must be configured to
use ingressRateLimitPerQueue for this to take effect. A
value of 0-pe…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.3.1.2

hpIngressRateLimitPortBpsTable

table deprecated
.1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the port ingress
Rate-Limiting bits-per-second configurations on this
switch.  The number of entries in this table is determined 
 by hpIngressRateLimitPortNumQueues. The priority of the 
 queues is in ascending order, starting with queue one 
being the lowest priority and queue 
hpIngressRateLimitPortNumQueues being the highest 
priority queue.
hpIngressRateLimitPortBpsEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1
The information associated with each port's egress
Rate-Limiting bits-per-second configuration.
Indexes
hpIngressRateLimitPortIndex hpIngressRateLimitPortBpsQueue
Column Syntax OID
hpIngressRateLimitPortBpsQueue deprecated
The queue associated with this entry. The priority of
the queues is in ascending order, starting with queue one
being the lowest and queue
hpIngressRateLimitgressPortNumQueues being the highest.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1.1
hpIngressRateLimitPortBps deprecated
The maximum bits-per-second of traffic that may be
transmitted by this port's queue on ingress.
hpIngressRateLimitPortControlMode must be configured to
use ingressRateLimitPerQueue for this to take effect. A
value o…
Unsigned32r/w
Constraints:
range: 0-4200000000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.5.1.4.1.2

hpIngressBcastLimitPortConfigTable

table
.1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1 · 1 row entry · 4 columns
Open in standard view 
A table that contains information about the port ingress 
Broadcast-Limiting configurations on this switch.
hpIngressBcastLimitPortConfigEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1
The information associated with each port's ingress
Broadcast-Limiting configuration.
Indexes
hpIngressBcastLimitPortIndex
Column Syntax OID
hpIngressBcastLimitPortIndex
The ifIndex value which uniquely identifies a row in the
Interfaces Table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.1
hpIngressBcastLimitPortControlMode
The mode by which this port will be Broadcast-Limited on
ingress. If ingressBcastLimitPerPortOnly is configured,
there will be a single maximum percentage-based broadcast
traffic limit for the entire port. If
ingressB…
Enumerationr/w
Enumerated Values:
1disabled
2ingressBcastLimitPerPortOnly
3ingressBcastLimitPerPortOnlyKbpsMode
 .1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.2
hpIngressBcastLimitPortSingleControlPrct
When hpIngressBcastLimitPortControlMode is configured
for ingressBcastLimitPerPortOnly, this value is the maximum
percentage of traffic that may be transmitted by
this port on ingress.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.3
hpIngressBcastLimitPortSingleControlKbps
When hpIngressBcastLimitPortControlMode is configured for
ingressBcastLimitPerPortOnlyKbpsMode, this value is the
maximum kilobits-per-second of broadcast traffic that may be
transmitted by this port on ingress.
Integer32r/w
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.6.1.1.1.4

hpIngressMcastLimitPortConfigTable

table
.1.3.6.1.4.1.11.2.14.10.2.14.1.7.1.1 · 1 row entry · 4 columns
Open in standard view 
A table that contains information about the port ingress 
Multicast-Limiting configurations on this switch.
hpIngressMcastLimitPortConfigEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.7.1.1.1
The information associated with each port's ingress
Multicast-Limiting configuration.
Indexes
hpIngressMcastLimitPortIndex
Column Syntax OID
hpIngressMcastLimitPortIndex
The ifIndex value which uniquely identifies a row in the
Interfaces Table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.10.2.14.1.7.1.1.1.1
hpIngressMcastLimitPortControlMode
The mode by which this port will be Multicast-Limited on
ingress. If ingressMcastLimitPerPortOnly is configured,
there will be a single maximum percentage-based multicast
traffic limit for the entire port. If
ingressM…
Enumerationr/w
Enumerated Values:
1disabled
2ingressMcastLimitPerPortOnly
3ingressMcastLimitPerPortOnlyKbpsMode
 .1.3.6.1.4.1.11.2.14.10.2.14.1.7.1.1.1.2
hpIngressMcastLimitPortSingleControlPrct
When hpIngressMcastLimitPortControlMode is configured
for ingressMcastLimitPerPortOnly, this value is the maximum
percentage of multicast traffic that may be transmitted
by this port on ingress.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.10.2.14.1.7.1.1.1.3
hpIngressMcastLimitPortSingleControlKbps
When hpIngressMcastLimitPortControlMode is configured
for ingressMcastLimitPerPortOnlyKbpsMode, this value is the
maximum kilobits-per-second of multicast traffic that may be
transmitted by this port on ingress.
Integer32r/w
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.7.1.1.1.4

hpUnknownUnicastLimitConfigTable

table
.1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1 · 1 row entry · 4 columns
Open in standard view 
A table that contains information about the 
unknown-unicast rate limiting configurations 
on this switch.
hpUnknownUnicastLimitConfigEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1.1
The information associated with each port's
unknown-unicast rate limiting configuration.
Indexes
hpUnknownUnicastLimitPortIndex
Column Syntax OID
hpUnknownUnicastLimitPortIndex
The ifIndex value which uniquely identifies a row
in the interfaces table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1.1.1
hpUnknownUnicastLimitPortControlMode
The mode by which unknown-unicast ingress traffic on this port
will be rate limited. If unknownUnicastLimitPerPortOnly is
configured, the limit will be a percentage of the current line
rate of the port. The percentage…
Enumerationr/w
Enumerated Values:
1disabled
2unknownUnicastLimitPerPortOnly
3unknownUnicastLimitPerPortOnlyKbpsMode
 .1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1.1.2
hpUnknownUnicastLimitPortSingleControlPrct
When hpUnknownUnicastLimitPortControlMode is
unknownUnicastLimitPerPortOnly, this value is the maximum allowed
ingress rate for unknown-unicast traffic on this port as a
percentage of the current line rate.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1.1.3
hpUnknownUnicastLimitPortSingleControlKbps
When hpUnknownUnicastLimitPortControlMode is
UnknownUnicastLimitPerPortOnlyKbpsMode, this value is the maximum
allowed ingress rate for unknown-unicast traffic on this port in
kilobits-per-second.
Integer32r/w
Constraints:
range: 0-100000000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.8.1.1.1.4

hpicfIngressRateLimitVlanConfigTable

table
.1.3.6.1.4.1.11.2.14.10.2.14.1.9.1 · 1 row entry · 3 columns
Open in standard view 
A table of VLAN rate limits.
hpicfIngressRateLimitVlanConfigEntry entry .1.3.6.1.4.1.11.2.14.10.2.14.1.9.1.1
A set of objects used to configure rate
limits on a VLANs.
Indexes
hpicfIngressRateLimitVlanIndex
Column Syntax OID
hpicfIngressRateLimitVlanIndex
The VLAN ifIndex value that uniquely
identifies a row in the Interfaces Table
and corresponds to the VLAN on which the rate
limit is being set.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.10.2.14.1.9.1.1.1
hpicfIngressRateLimitVlanControlMode
The rate limit mode. A value of 1 indicates that
there is no rate limit set. A value of 2 indicates
that the rate limit on the VLAN will be set in
Kilobits per second.
Enumerationr/w
Enumerated Values:
1disabled
2ingressVlanKbps
 .1.3.6.1.4.1.11.2.14.10.2.14.1.9.1.1.2
hpicfIngressRateLimitVlanKbps
The maximum rate of inbound traffic permitted on
the VLAN in kilobits per second. This limit is the
total aggregate inbound traffic allowed across all
ports in the VLAN. The value of this object only
takes effect when…
Unsigned32r/w
Constraints:
range: 0-260000000
 .1.3.6.1.4.1.11.2.14.10.2.14.1.9.1.1.3