HP-ICF-OPENFLOW-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hpicfOpenFlowInstanceTable

table

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4 · 1 row entry · 33 columns

Open in standard view

A table that is used create an OpenFlow instance. 
For maximum number of OpenFlow instances 
that can be supported, refer to 
hpicfOpenFLowMaxInstances MIB object.

hpicfOpenFlowInstanceEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1

A set of objects that are used to create an
OpenFlow instance.

Indexes

hpicfOpenFlowInstanceName

Column Syntax OID

hpicfOpenFlowInstanceName

Unique name given to an OpenFlow instance.
The instance name 'aggregate' is special case
denoting switch functioning as OpenFlow switch.
The instance name allows lowercase alphanumeric
characters and the special charac…

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.1

hpicfOpenFlowInstanceAdminStatus

This object is used to administratively enable
or disable an OpenFlow instance. This MIB
object can be set to 'enable' only when either
hpicfOpenFlowInstanceListenPortCfg has been
set to 'true' or atleast one contro…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.2

hpicfOpenFlowInstanceListenPortCfg

This object indicates if a listen-port is
configured on this OpenFlow instance.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.3

hpicfOpenFlowInstanceListenPort

Port number for the listen-port on the
OpenFlow instance. A valid port number is
between 1024 and 65534 inclusive.

INET-ADDRESS-MIBInetPortNumberr/w

Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.4

hpicfOpenFlowInstanceListenPortIsOobm

This object indicates if a listen-port is
configured for this OpenFlow instance over
OOBM(Out Of Band Management) interface.
This MIB object will be applicable only if
there is a physical OOBM port on the device.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.5

hpicfOpenFlowInstanceMode

This object allows the user to specify the
mode of OpenFlow operation for an instance.
In active mode, new flows get redirected to
the OpenFlow controller. In passive mode,
new flows are not sent to the OpenFlow
co…

Enumerationr/w

Enumerated Values:

1	active
2	passive

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.6

hpicfOpenFlowInstanceFlowLocationMode

This object specifies if the flows for this
instance will be located in hardware only or
in hardware and software. By default, flows
will be located in hardware and software.This
object is applicable only for an Op…

Enumerationr/w

Enumerated Values:

1	hardwareOnly
2	hardwareAndSoftware

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.7

hpicfOpenFlowConnectionInterruptionMode

This MIB object is used to specify the type
of fallback when the switch loses connection
with the controller. In fail-secure mode,
packets and messages destined to the current
controller are dropped. Flows should c…

Enumerationr/w

Enumerated Values:

1	failSecure
2	failStandalone

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.8

hpicfOpenFlowInstanceHwRateLimit

This object limits the bandwidth per module
in kilobits per second, that this OpenFlow
instance can utilize. This implementation
supports a minimum rate limit of 0 kbps and
a maximum rate limit of 10000000 kbps.

kilobits per secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.9

hpicfOpenFlowInstanceSwRateLimit

This object limits the number of packets per
second for each module, that this instance
can send to the software path on the CPU.
Increasing the software rate limit would
increase CPU consumption and may impact the
…

packets per secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.10

hpicfOpenFlowInstanceDatapathID

Datapath ID(DPID) uniquely identifies a
datapath between this instance and the
controller. Its lower 48-bits are intended for
switch MAC address, while the upper 16-bits
are defined by the implementation.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.11

hpicfOpenFlowInstanceNumOfHwFlows

This object indicates the number of hardware
flows in this OpenFlow instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.12

hpicfOpenFlowInstanceNumOfSwFlows

This object indicates the number of software
flows in this OpenFlow instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.13

hpicfOpenFlowInstanceOperStatus

This object is used to determine the
operational state of an OpenFlow instance.
The reason for operational status to be
down is specified by the
hpicfOpenFlowInstanceOperStatusReason MIB.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.14

hpicfOpenFlowInstanceMaxBackOffInterval

Interval between two consecutive attempts
made by an instance to reconnect to a
controller increases exponentially till it
reaches the value specified by this MIB
object. All subsequent attempts use this
value as t…

secondsUnsigned32r/w

Constraints:
range: 1-3600

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.15

hpicfOpenFlowInstanceRowStatus

Row status for this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.16

hpicfOpenFlowInstanceProbeInterval

This MIB object specifies the interval
between two consecutive probes sent from
an instance to the controller. This MIB
value also determines how soon the instance
will enter the connection interruption mode.
If th…

secondsUnsigned32r/w

Constraints:
range: 1-3600

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.17

hpicfOpenFlowInstanceProtoVersion

This MIB object specifies the
OpenFlow instance protocol version.

Enumerationr/w

Enumerated Values:

1	v1dot0
2	v1dot3

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.18

hpicfOpenFlowInstanceProtoVersionOnly

Setting this MIB object to true will support
only the specific version mentioned by
hpicfOpenFlowInstanceProtoVersion MIB and not
compatible with lower versions.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.19

hpicfOpenFlowInstanceNumOfSwFlowTable

This MIB object specifies the number of
software flow tables for this OpenFlow
instance. The maximum value supported is 8.
This object is applicable only for
an OpenFlow version 1.3 instance.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.20

hpicfOpenFlowInstanceOperStatusReason

This MIB object specifies the reason for
hpicfOpenFlowInstanceOperStatus to be down.

Enumeration

Enumerated Values:

1	notApplicable
2	hardwareResourcesUnavailable
3	memberVLANNotConfigured
4	memberVLANRemoved
5	noValidPortsInMemberVLAN
6	controllerVLANNotConfigured
7	enableFailedInHardware
8	disabled

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.21

hpicfOpenFlowInstanceEgressOnlyPorts

This MIB object specifies the list of egress
only ports for this OpenFlow instance.

Q-BRIDGE-MIBPortList

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.22

hpicfOpenFlowInstanceCapabilities

This MIB object specifies the instance
capabilities exchanged with the controller.

Bits

Enumerated Values:

0	flowStatistics
1	tableStatistics
2	portStatistics
3	groupStatistics
4	meterStatistics
5	blockPorts

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.23

hpicfOpenFlowInstanceHwTableMissCount

This MIB object specifies the number of
packets which do not match any rules in the
hardware table. This object is applicable
only for an OpenFlow version 1.0 instance.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.24

hpicfOpenFlowInstanceTableModel

This MIB object determines the table model
of an OpenFlow instance.

Enumeration

Enumerated Values:

1	none
2	singleTable
3	policyEngineAndSoftware
4	ipControlWithPolicyEngineAndSoftware
5	customPipeline

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.25

hpicfOpenFlowInstanceMembers

This MIB object is used to add member VLANs to an
OpenFlow instance.

HP-ICF-TCVidListr/w

Textual Convention: HP-ICF-TCVidList OctetString

Type Constraints:
range: 512

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.26

hpicfOpenFlowInstancePipelineModel

This MIB object is used to configure the openflow
instance pipeline model.
A value of 0(none) indicates no table pipeline model
which is equal to standard match.
A value of 1(standardMatch) enables an instance in
adve…

Enumerationr/w

Enumerated Values:

0	none
1	standardMatch
2	ipcontrolTable
3	customPipeline

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.27

hpicfOpenFlowInstanceDatapathDesc

This MIB object is a user-defined description of the data
path. If not set, hpicfOpenFlowInstanceName is used.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.28

hpicfOpenFlowInstanceSourceMacGrpTable

This object is used to enable or disable the source
MAC group table in the OpenFlow pipeline. This MIB
object can be set to 'enable' only on one instance.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.29

hpicfOpenFlowInstanceDestMacGrpTable

This object is used to enable or disable the destination
MAC group table in the OpenFlow table. This MIB
object can be set to 'enable' only on one instance.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.30

hpicfOpenFlowInstanceMissRuleDefaultAction

This MIB object is used to configure the flow miss
action associated with the instance.
A value of 0(none) indicates no flow miss action
specified, which is to drop all unknown packets.
A value of 1(drop) enables an in…

Enumerationr/w

Enumerated Values:

0	none
1	drop
2	normal
3	ctrl

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.31

hpicfOpenFlowInstanceOverrideProtocol

This MIB object is used to configure the Override
protocol associated with the instance.

Bitsr/w

Enumerated Values:

0	stp
1	gvrp
2	mvrp
3	lacp
4	dot1x
5	udld
6	loopprotect
7	pvst
8	smartlink
9	dldp
10	bonjour
11	traditionalPipeline
31	all

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.32

hpicfOpenFlowInstancePktInVlanTagging

This MIB object is used to configure the 802.1q
tagging property for a packet encapsulated inside
the OpenFlow packet-in header.
A value of 0 (default) indicates the default behavior
which is the packet encapsulated ins…

Enumerationr/w

Enumerated Values:

0	default
1	inputForm
2	tagAlways
3	untagAlways

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.33

hpicfOpenFlowInstanceMembershipTable

table deprecated

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.5 · 1 row entry · 1 columns

Open in standard view

Table used to add members to OpenFlow instances.
This table is deprecated and instead object
hpicfOpenFlowInstanceMembers is used to configure members 
for an OpenFlow instance.

hpicfOpenFlowInstanceMembershipEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.89.1.5.1

A set of objects that are used to add members
to an OpenFlow instance.

Indexes

hpicfOpenFlowInstanceName IF-MIBifIndex

Column Syntax OID

hpicfOpenFlowInstanceMembershipRowStatus deprecated

Row status for this member.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.5.1.2

hpicfOpenFlowControllerTable

table

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.6 · 1 row entry · 8 columns

Open in standard view

Table used to configure controllers. For
maximum number of OpenFlow controllers 
that can be supported, refer to 
hpicfOpenFlowMaxControllers MIB object.

hpicfOpenFlowControllerEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1

A set of objects that are used to configure
OpenFlow Controllers.

Indexes

hpicfOpenFlowControllerID

Column Syntax OID

hpicfOpenFlowControllerID

Unique ID given to a Controller. This will be
associated with an instance through
hpicfOpenFlowInstanceControllerTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.1

hpicfOpenFlowControllerInetAddressType

Address type of this controller. This
implementation supports only ipv4 type.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.2

hpicfOpenFlowControllerInetAddress

IP Address of the controller.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.3

hpicfOpenFlowControllerPort

The port over which the controller can be
reached.

INET-ADDRESS-MIBInetPortNumberr/w

Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.4

hpicfOpenFlowControllerInterface

This MIB object specifies an interface over
which the controller is reachable.

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.5

hpicfOpenFlowControllerRowStatus

Row status for this table. The
hpicfOpenFlowControllerInetAddress and
hpicfOpenFlowControllerInterface MIB objects
have to be set to valid values to move this
object to 'active' state. This conceptual row
can be de…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.6

hpicfOpenFlowControllerSourceAddressType

Address type of the Source IP. This
implementation supports only ipv4 type.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.7

hpicfOpenFlowControllerSourceAddress

Source IP address to use when connecting
to the controller.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.8

hpicfOpenFlowInstanceControllerTable

table

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.8 · 1 row entry · 5 columns

Open in standard view

Table that contains objects for connection 
state and status between an OpenFlow instance 
and a controller.

hpicfOpenFlowInstanceControllerEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.89.1.8.1

A set of objects used to monitor the status
and state of connection between an OpenFlow
instance and controller.

Indexes

hpicfOpenFlowInstanceName hpicfOpenFlowControllerID

Column Syntax OID

hpicfOpenFlowInstanceControllerStatus

Connection status between an OpenFlow
instance and a controller.

Enumeration

Enumerated Values:

1	connected
2	disconnected

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.8.1.1

hpicfOpenFlowInstanceControllerState

Connection state between an OpenFlow
instance and a controller. The state 'void'
implies that there is no connection. The state
'backoff' represents a state where the device
is attempting to reconnect to the controll…

Enumeration

Enumerated Values:

1	void
2	backoff
3	connecting
4	active
5	idle

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.8.1.2

hpicfOpenFlowInstanceControllerRole

Role of a controller in an instance. The
default role of a controller is equal. In this
role, the controller has full access to the
switch and is equal to other controllers in
the same role. In member role, the cont…

Enumeration

Enumerated Values:

1	equal
2	conductor
3	member

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.8.1.3

hpicfOpenFlowInstanceControllerConnSecure

This object indicates if the connection
between the controller and instance is secure.
Setting this MIB to true will initiate TLS as
transport protocol.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.8.1.4

hpicfOpenFlowInstanceControllerRowStatus

Row status for this table. Row transition to
'createAndWait', 'notReady' and
'notInService' states are not allowed.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.8.1.5

hpicfOpenFlowInstanceMeterTable

table

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.19 · 1 row entry · 5 columns

Open in standard view

Table that contains objects related to meters
of an OpenFlow instance. This table is 
populated when meters are configured from 
controller.

hpicfOpenFlowInstanceMeterEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.89.1.19.1

A set of objects used to retrieve details
about meters associated with an OpenFlow instance.

Indexes

hpicfOpenFlowInstanceName hpicfOpenFlowInstanceMeterID

Column	Syntax	OID
hpicfOpenFlowInstanceMeterID Unique ID given to a meter.	Unsigned32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.11.2.14.11.5.1.89.1.19.1.1`
hpicfOpenFlowInstanceMeterFlowCount Number of flows on which this meter is applied.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.5.1.89.1.19.1.2`
hpicfOpenFlowInstanceMeterInputPktCount Number of packets processed by this meter.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.11.2.14.11.5.1.89.1.19.1.3`
hpicfOpenFlowInstanceMeterInputByteCount Number of bytes processed by this meter.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.11.2.14.11.5.1.89.1.19.1.4`
hpicfOpenFlowInstanceMeterDuration Duration for which this meter is active.	secondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.11.2.14.11.5.1.89.1.19.1.5`

hpicfOpenFlowInstanceMeterBandTable

table

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.20 · 1 row entry · 7 columns

Open in standard view

Table that contains objects related to meter 
bands for a specific meter in an OpenFlow 
instance. This table is populated when meters 
and their bands are configured from controller.

hpicfOpenFlowInstanceMeterBandEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.89.1.20.1

A set of objects used to retrieve details
about meter bands associated with a meter and
an OpenFlow instance.

Indexes

hpicfOpenFlowInstanceName hpicfOpenFlowInstanceMeterID hpicfOpenFlowInstanceMeterBandID

Column Syntax OID

hpicfOpenFlowInstanceMeterBandID

Unique ID given to a band in a meter.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.20.1.1

hpicfOpenFlowInstanceMeterBandType

This meter band type determines how the
packets are processed.

Enumeration

Enumerated Values:

1	drop
2	mark

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.20.1.2

hpicfOpenFlowInstanceMeterBandRate

This MIB object specifies the rate beyond
which the incoming packets would be treated
according to action specified by
hpicfOpenFlowInstanceMeterBandType MIB.
The units of this rate is determined by the
hpicfOpenFlo…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.11.2.14.11.5.1.89.1.20.1.3

hpicfOpenFlowInstanceMeterBandRateUnit

This MIB object specifies the unit for
hpicfOpenFlowInstanceMeterBandRate MIB. The
units can be either kilobits per second or
packets per second.

Enumeration

Enumerated Values: