hpicfOpenFlowInstanceProbeInterval

HP-ICF-OPENFLOW-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.17
MIB view Table view

Object

column r/w seconds Unsigned32 
This MIB object specifies the interval 
between two consecutive probes sent from 
an instance to the controller. This MIB 
value also determines how soon the instance 
will enter the connection interruption mode. 
If the instance does not hear a reply from 
the controller for three consecutive probes, 
it will flag the controller as unreachable 
and enter connection interruption mode.

Context

MIB
HP-ICF-OPENFLOW-MIB
OID
.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.17
Type
column
Access
readwrite
Status
current
Units
seconds
Parent
hpicfOpenFlowInstanceEntry
Table
hpicfOpenFlowInstanceTable
Siblings
32

Syntax

seconds Unsigned32

Values & Constraints

Object Constraints
range: 1-3600

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpicfOpenFlowInstanceName
Unique name given to an OpenFlow instance. The instance name 'aggregate' is special case denoting switch functioning as OpenFlow switch. The instance name allows lowercase alphan…
columnOctetString.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.1
hpicfOpenFlowInstanceSwRateLimit
This object limits the number of packets per second for each module, that this instance can send to the software path on the CPU. Increasing the software rate limit would incre…
columnpackets per second SNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.10
hpicfOpenFlowInstanceDatapathID
Datapath ID(DPID) uniquely identifies a datapath between this instance and the controller. Its lower 48-bits are intended for switch MAC address, while the upper 16-bits are d…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.11
hpicfOpenFlowInstanceNumOfHwFlows
This object indicates the number of hardware flows in this OpenFlow instance.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.12
hpicfOpenFlowInstanceNumOfSwFlows
This object indicates the number of software flows in this OpenFlow instance.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.13
hpicfOpenFlowInstanceOperStatus
This object is used to determine the operational state of an OpenFlow instance. The reason for operational status to be down is specified by the hpicfOpenFlowInstanceOperStatus…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.14
hpicfOpenFlowInstanceMaxBackOffInterval
Interval between two consecutive attempts made by an instance to reconnect to a controller increases exponentially till it reaches the value specified by this MIB object. All …
columnseconds Unsigned32.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.15
hpicfOpenFlowInstanceRowStatus
Row status for this table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.16
hpicfOpenFlowInstanceProtoVersion
This MIB object specifies the OpenFlow instance protocol version.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.18
hpicfOpenFlowInstanceProtoVersionOnly
Setting this MIB object to true will support only the specific version mentioned by hpicfOpenFlowInstanceProtoVersion MIB and not compatible with lower versions.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.19
hpicfOpenFlowInstanceAdminStatus
This object is used to administratively enable or disable an OpenFlow instance. This MIB object can be set to 'enable' only when either hpicfOpenFlowInstanceListenPortCfg has b…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.2
hpicfOpenFlowInstanceNumOfSwFlowTable
This MIB object specifies the number of software flow tables for this OpenFlow instance. The maximum value supported is 8. This object is applicable only for an OpenFlow versi…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.20
hpicfOpenFlowInstanceOperStatusReason
This MIB object specifies the reason for hpicfOpenFlowInstanceOperStatus to be down.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.21
hpicfOpenFlowInstanceEgressOnlyPorts
This MIB object specifies the list of egress only ports for this OpenFlow instance.
columnQ-BRIDGE-MIBPortList.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.22
hpicfOpenFlowInstanceCapabilities
This MIB object specifies the instance capabilities exchanged with the controller.
columnBits.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.23
hpicfOpenFlowInstanceHwTableMissCount
This MIB object specifies the number of packets which do not match any rules in the hardware table. This object is applicable only for an OpenFlow version 1.0 instance.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.24
hpicfOpenFlowInstanceTableModel
This MIB object determines the table model of an OpenFlow instance.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.25
hpicfOpenFlowInstanceMembers
This MIB object is used to add member VLANs to an OpenFlow instance.
columnHP-ICF-TCVidList.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.26
hpicfOpenFlowInstancePipelineModel
This MIB object is used to configure the openflow instance pipeline model. A value of 0(none) indicates no table pipeline model which is equal to standard match. A value of 1(sta…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.27
hpicfOpenFlowInstanceDatapathDesc
This MIB object is a user-defined description of the data path. If not set, hpicfOpenFlowInstanceName is used.
columnOctetString.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.28
hpicfOpenFlowInstanceSourceMacGrpTable
This object is used to enable or disable the source MAC group table in the OpenFlow pipeline. This MIB object can be set to 'enable' only on one instance.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.29
hpicfOpenFlowInstanceListenPortCfg
This object indicates if a listen-port is configured on this OpenFlow instance.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.3
hpicfOpenFlowInstanceDestMacGrpTable
This object is used to enable or disable the destination MAC group table in the OpenFlow table. This MIB object can be set to 'enable' only on one instance.
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.30
hpicfOpenFlowInstanceMissRuleDefaultAction
This MIB object is used to configure the flow miss action associated with the instance. A value of 0(none) indicates no flow miss action specified, which is to drop all unknown p…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.31
hpicfOpenFlowInstanceOverrideProtocol
This MIB object is used to configure the Override protocol associated with the instance.
columnBits.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.32
hpicfOpenFlowInstancePktInVlanTagging
This MIB object is used to configure the 802.1q tagging property for a packet encapsulated inside the OpenFlow packet-in header. A value of 0 (default) indicates the default behav…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.33
hpicfOpenFlowInstanceListenPort
Port number for the listen-port on the OpenFlow instance. A valid port number is between 1024 and 65534 inclusive.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.4
hpicfOpenFlowInstanceListenPortIsOobm
This object indicates if a listen-port is configured for this OpenFlow instance over OOBM(Out Of Band Management) interface. This MIB object will be applicable only if there i…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.5
hpicfOpenFlowInstanceMode
This object allows the user to specify the mode of OpenFlow operation for an instance. In active mode, new flows get redirected to the OpenFlow controller. In passive mode, ne…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.6
hpicfOpenFlowInstanceFlowLocationMode
This object specifies if the flows for this instance will be located in hardware only or in hardware and software. By default, flows will be located in hardware and software.T…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.7
hpicfOpenFlowConnectionInterruptionMode
This MIB object is used to specify the type of fallback when the switch loses connection with the controller. In fail-secure mode, packets and messages destined to the current…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.8
hpicfOpenFlowInstanceHwRateLimit
This object limits the bandwidth per module in kilobits per second, that this OpenFlow instance can utilize. This implementation supports a minimum rate limit of 0 kbps and a m…
columnkilobits per second SNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.9