hpicfOpenFlowInstanceHwTableMissCount
HP-ICF-OPENFLOW-MIB ·
.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.24
Object
column
SNMPv2-SMICounter64
This MIB object specifies the number of packets which do not match any rules in the hardware table. This object is applicable only for an OpenFlow version 1.0 instance.
Context
- MIB
- HP-ICF-OPENFLOW-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.24- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hpicfOpenFlowInstanceEntry
- Table
- hpicfOpenFlowInstanceTable
- Siblings
- 32
Syntax
SNMPv2-SMICounter64
- Source
- SNMPv2-SMICounter64
- Base type
Unsigned64
Values & Constraints
Type Constraints
range: 0..18446744073709551615
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfOpenFlowInstanceName Unique name given to an OpenFlow instance.
The instance name 'aggregate' is special case
denoting switch functioning as OpenFlow switch.
The instance name allows lowercase alphan… | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.1 |
| hpicfOpenFlowInstanceSwRateLimit This object limits the number of packets per
second for each module, that this instance
can send to the software path on the CPU.
Increasing the software rate limit would
incre… | column | packets per second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.10 |
| hpicfOpenFlowInstanceDatapathID Datapath ID(DPID) uniquely identifies a
datapath between this instance and the
controller. Its lower 48-bits are intended for
switch MAC address, while the upper 16-bits
are d… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.11 |
| hpicfOpenFlowInstanceNumOfHwFlows This object indicates the number of hardware
flows in this OpenFlow instance. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.12 |
| hpicfOpenFlowInstanceNumOfSwFlows This object indicates the number of software
flows in this OpenFlow instance. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.13 |
| hpicfOpenFlowInstanceOperStatus This object is used to determine the
operational state of an OpenFlow instance.
The reason for operational status to be
down is specified by the
hpicfOpenFlowInstanceOperStatus… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.14 |
| hpicfOpenFlowInstanceMaxBackOffInterval Interval between two consecutive attempts
made by an instance to reconnect to a
controller increases exponentially till it
reaches the value specified by this MIB
object. All … | column | seconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.15 |
| hpicfOpenFlowInstanceRowStatus Row status for this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.16 |
| hpicfOpenFlowInstanceProbeInterval This MIB object specifies the interval
between two consecutive probes sent from
an instance to the controller. This MIB
value also determines how soon the instance
will enter … | column | seconds Unsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.17 |
| hpicfOpenFlowInstanceProtoVersion This MIB object specifies the
OpenFlow instance protocol version. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.18 |
| hpicfOpenFlowInstanceProtoVersionOnly Setting this MIB object to true will support
only the specific version mentioned by
hpicfOpenFlowInstanceProtoVersion MIB and not
compatible with lower versions. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.19 |
| hpicfOpenFlowInstanceAdminStatus This object is used to administratively enable
or disable an OpenFlow instance. This MIB
object can be set to 'enable' only when either
hpicfOpenFlowInstanceListenPortCfg has b… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.2 |
| hpicfOpenFlowInstanceNumOfSwFlowTable This MIB object specifies the number of
software flow tables for this OpenFlow
instance. The maximum value supported is 8.
This object is applicable only for
an OpenFlow versi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.20 |
| hpicfOpenFlowInstanceOperStatusReason This MIB object specifies the reason for
hpicfOpenFlowInstanceOperStatus to be down. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.21 |
| hpicfOpenFlowInstanceEgressOnlyPorts This MIB object specifies the list of egress
only ports for this OpenFlow instance. | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.22 |
| hpicfOpenFlowInstanceCapabilities This MIB object specifies the instance
capabilities exchanged with the controller. | column | Bits | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.23 |
| hpicfOpenFlowInstanceTableModel This MIB object determines the table model
of an OpenFlow instance. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.25 |
| hpicfOpenFlowInstanceMembers This MIB object is used to add member VLANs to an
OpenFlow instance. | column | HP-ICF-TCVidList | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.26 |
| hpicfOpenFlowInstancePipelineModel This MIB object is used to configure the openflow
instance pipeline model.
A value of 0(none) indicates no table pipeline model
which is equal to standard match.
A value of 1(sta… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.27 |
| hpicfOpenFlowInstanceDatapathDesc This MIB object is a user-defined description of the data
path. If not set, hpicfOpenFlowInstanceName is used. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.28 |
| hpicfOpenFlowInstanceSourceMacGrpTable This object is used to enable or disable the source
MAC group table in the OpenFlow pipeline. This MIB
object can be set to 'enable' only on one instance. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.29 |
| hpicfOpenFlowInstanceListenPortCfg This object indicates if a listen-port is
configured on this OpenFlow instance. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.3 |
| hpicfOpenFlowInstanceDestMacGrpTable This object is used to enable or disable the destination
MAC group table in the OpenFlow table. This MIB
object can be set to 'enable' only on one instance. | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.30 |
| hpicfOpenFlowInstanceMissRuleDefaultAction This MIB object is used to configure the flow miss
action associated with the instance.
A value of 0(none) indicates no flow miss action
specified, which is to drop all unknown p… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.31 |
| hpicfOpenFlowInstanceOverrideProtocol This MIB object is used to configure the Override
protocol associated with the instance. | column | Bits | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.32 |
| hpicfOpenFlowInstancePktInVlanTagging This MIB object is used to configure the 802.1q
tagging property for a packet encapsulated inside
the OpenFlow packet-in header.
A value of 0 (default) indicates the default behav… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.33 |
| hpicfOpenFlowInstanceListenPort Port number for the listen-port on the
OpenFlow instance. A valid port number is
between 1024 and 65534 inclusive. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.4 |
| hpicfOpenFlowInstanceListenPortIsOobm This object indicates if a listen-port is
configured for this OpenFlow instance over
OOBM(Out Of Band Management) interface.
This MIB object will be applicable only if
there i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.5 |
| hpicfOpenFlowInstanceMode This object allows the user to specify the
mode of OpenFlow operation for an instance.
In active mode, new flows get redirected to
the OpenFlow controller. In passive mode,
ne… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.6 |
| hpicfOpenFlowInstanceFlowLocationMode This object specifies if the flows for this
instance will be located in hardware only or
in hardware and software. By default, flows
will be located in hardware and software.T… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.7 |
| hpicfOpenFlowConnectionInterruptionMode This MIB object is used to specify the type
of fallback when the switch loses connection
with the controller. In fail-secure mode,
packets and messages destined to the current… | column | Enumeration | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.8 |
| hpicfOpenFlowInstanceHwRateLimit This object limits the bandwidth per module
in kilobits per second, that this OpenFlow
instance can utilize. This implementation
supports a minimum rate limit of 0 kbps and
a m… | column | kilobits per second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.9 |