HP-ICF-FAULT-FINDER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
31

hpicfFfControlTable

table
.1.3.6.1.4.1.11.2.14.11.1.7.1 · 1 row entry · 5 columns
Open in standard view 
This table contains one entry per fault type
that this agent is capable of monitoring.
hpicfFfControlEntry entry .1.3.6.1.4.1.11.2.14.11.1.7.1.1
Configuration information for a particular fault
type.
Indexes
hpicfFfControlIndex
Column Syntax OID
hpicfFfControlIndex
The type of fault for which this entry contains
configuration information.
HpicfFaultType
Textual Convention: HpicfFaultType Enumeration
Type Values:
1badDriver
2badXcvr
3badCable
4tooLongCable
5overBandwidth
6bcastStorm
7partition
8misconfiguredSQE
9polarityReversal
10networkLoop
11lossOfLink
12portSecurityViolation
13backupLinkTransition
14meshingFault
15fanFault
16rpsFault
17stuck10MbFault
18lossOfStackMember
19hotSwapReboot
20duplexMismatchHDX
21duplexMismatchFDX
22flowcntlJumbosFault
23portSelftestFailure
24xcvrUnidentified
25xcvrUnsupported
26crfNotify
27crfThrottled
28crfBlocked
29xcvrNotYetSupported
30xcvrBRevOnly
31xcvrNotSupportedOnPort
32phyReadFailure
33linkFlap
34intel82566dmportprotect
35xcvrExceedQty
36xcvrClone
37xcvrCloneReminder
38bcastStormPerPort
39linkFlapPerPort
40rxNonStdPreamble
41mcastStorm
42mcastStormPerPort
 .1.3.6.1.4.1.11.2.14.11.1.7.1.1.1
hpicfFfAction
This object is used to configure the action,
if any, to be taken if a fault of this type is
detected by the agent. Setting an instance of
this object to 'none' will clear any previous
state of the associated fault on al…
HpicfFaultActionr/w
Textual Convention: HpicfFaultAction Enumeration
Type Values:
1none
2warn
3warnAndDisable
4warnAndSpeedReduce
5warnAndSpeedReduceAndDisable
 .1.3.6.1.4.1.11.2.14.11.1.7.1.1.2
hpicfFfWarnTolerance
The tolerance level used to calculate the
fault warning threshold for this fault type.

The agent will periodically check relevant
statistics for each port for each type of fault.
If the warning threshold …
HpicfFaultTolerancer/w
Textual Convention: HpicfFaultTolerance Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.1.7.1.1.3
hpicfFfDisablePortTolerance
The tolerance level used to calculate the
port disable threshold for this fault type.
The value of an instance of this object MUST be
greater than the value of the corresponding
instance of the hpicfFfWarnTolerance.
…
HpicfFaultTolerancer/w
Textual Convention: HpicfFaultTolerance Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.1.7.1.1.4
hpicfFfSpeedReduceTolerance
The tolerance level used to calculate the
speed reduction threshold for this fault type.
The value of an instance of this object MUST be
greater than the value of the corresponding
instance of the hpicfFfWarnTolerance, …
HpicfFaultTolerancer/w
Textual Convention: HpicfFaultTolerance Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.1.7.1.1.5

hpicfFfLogTable

table
.1.3.6.1.4.1.11.2.14.11.1.7.2 · 1 row entry · 10 columns
Open in standard view 
A log of fault warnings and ports disabled by
the Fault Finder.
hpicfFfLogEntry entry .1.3.6.1.4.1.11.2.14.11.1.7.2.1
An entry in the Fault Finder log, containing
information about a single fault.
Indexes
hpicfFfLogIndex
Column Syntax OID
hpicfFfLogIndex
An arbitrary value which uniquely identifies
this log entry. The index for a particular log
entry must not change, even though entries with
lower valued indices have been deleted.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.1.7.2.1.1
hpicfFfLogCreateTime
The value of sysUpTime when this log entry was
added to the hpicfFfLogTable.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.11.2.14.11.1.7.2.1.2
hpicfFfLogPhysEntity
The entPhysicalIndex of the device port or other
physical component on which the fault was
detected. On agents which do not implement the
Entity MIB, this will contain the ifIndex of the
offending port.
ENTITY-MIBPhysicalIndex
Textual Convention: ENTITY-MIBPhysicalIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.1.7.2.1.3
hpicfFfLogFaultType
The type of fault which was detected on the
physical entity indicated by
hpicfFfLogPhysEntity.
HpicfFaultType
Textual Convention: HpicfFaultType Enumeration
Type Values:
1badDriver
2badXcvr
3badCable
4tooLongCable
5overBandwidth
6bcastStorm
7partition
8misconfiguredSQE
9polarityReversal
10networkLoop
11lossOfLink
12portSecurityViolation
13backupLinkTransition
14meshingFault
15fanFault
16rpsFault
17stuck10MbFault
18lossOfStackMember
19hotSwapReboot
20duplexMismatchHDX
21duplexMismatchFDX
22flowcntlJumbosFault
23portSelftestFailure
24xcvrUnidentified
25xcvrUnsupported
26crfNotify
27crfThrottled
28crfBlocked
29xcvrNotYetSupported
30xcvrBRevOnly
31xcvrNotSupportedOnPort
32phyReadFailure
33linkFlap
34intel82566dmportprotect
35xcvrExceedQty
36xcvrClone
37xcvrCloneReminder
38bcastStormPerPort
39linkFlapPerPort
40rxNonStdPreamble
41mcastStorm
42mcastStormPerPort
 .1.3.6.1.4.1.11.2.14.11.1.7.2.1.4
hpicfFfLogAction
The action, if any, that was taken by the agent
when this fault was detected.
HpicfFaultAction
Textual Convention: HpicfFaultAction Enumeration
Type Values:
1none
2warn
3warnAndDisable
4warnAndSpeedReduce
5warnAndSpeedReduceAndDisable
 .1.3.6.1.4.1.11.2.14.11.1.7.2.1.5
hpicfFfLogSeverity
The severity level of the fault. Port disables
will always be logged as 'critical'.

An agent may need to remove faults from the fault
log in order to reclaim resources. If so, it
must remove lower sever…
Enumeration
Enumerated Values:
1informational
2medium
3critical
 .1.3.6.1.4.1.11.2.14.11.1.7.2.1.6
hpicfFfLogStatus
Log entries will initially be created with the
value 'new'. A manager cannot set this object to
'new'. Setting this object to 'active' indicates
that the fault has been displayed to a user.
Setting this object to 'old…
Enumerationr/w
Enumerated Values:
1new
2active
3old
 .1.3.6.1.4.1.11.2.14.11.1.7.2.1.7
hpicfFfLogPhysClass
The PhysicalClass as defined by Entity MIB to
which this hpicfFfLogPhysIndex belongs.
ENTITY-MIBPhysicalClass
Textual Convention: ENTITY-MIBPhysicalClass Enumeration
Type Values:
1other
2unknown
3chassis
4backplane
5container
6powerSupply
7fan
8sensor
9module
10port
11stack
12cpu
 .1.3.6.1.4.1.11.2.14.11.1.7.2.1.8
hpicfFfLogInfoType
This field can be used to indicate the class of
information that 'hpicfFfLogInfo' holds
Enumeration
Enumerated Values:
1ipv4Address
2displayString
 .1.3.6.1.4.1.11.2.14.11.1.7.2.1.9
hpicfFfLogInfo
This can be used to hold any relevant information
about the current fault
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.1.7.2.1.10

hpicfFfBcastStormControlPortConfigTable

table
.1.3.6.1.4.1.11.2.14.11.1.7.5.1 · 1 row entry · 6 columns
Open in standard view 
This table provides information about Broadcast Storm 
control configuration of all ports.
hpicfFfBcastStormControlPortConfigEntry entry .1.3.6.1.4.1.11.2.14.11.1.7.5.1.1
This object provides information about Broadcast Storm
Control configuration of each port.
Indexes
hpicfFfBcastStormControlPortIndex
Column Syntax OID
hpicfFfBcastStormControlPortIndex
The ifIndex value which uniquely identifies a row in
the Interfaces Table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.1
hpicfFfBcastStormControlMode
The Broadcast Storm Control mode of a port.
A value of disable (1) indicates that no rising
threshold value is set for broadcast storm traffic on
this port. A value of bcastRisingLevelpercent (2)
indicates that the ris…
Enumerationr/w
Enumerated Values:
1disabled
2bcastRisingLevelpercent
3bcastRisingLevelpps
 .1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.2
hpicfFfBcastStormControlRisingpercent
This is the rising threshold Level
in percent of bandwidth of the port.
hpicfFfBcastStormControlAction occurs when
broadcast traffic reaches this level.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.3
hpicfFfBcastStormControlRisingpps
This object indicates the rising threshold for Broadcast
Storm Control. This value is in packets-per-second of
received broadcast traffic.
hpicfFfBcastStormControlAction object takes action when
broadcast traffic reac…
Integer32r/w
Constraints:
range: 1-10000000
 .1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.4
hpicfFfBcastStormControlAction
This object defines the action taken by the switch when
a broadcast storm occurs on a port.
A value of none (1) indicates that no action is performed.
A value of warn (2) indicates that an event is logged when
broadcas…
Enumerationr/w
Enumerated Values:
1none
2warn
3warnAndDisable
 .1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.5
hpicfFfBcastStormControlPortDisableTimer
This object specifies the time period for which the port
remains in disabled state. A port is disabled when
broadcast traffic reaches the threshold value set on that
port. This time period is specified in seconds. The …
secondsUnsigned32r/w
Constraints:
range: 0-604800
 .1.3.6.1.4.1.11.2.14.11.1.7.5.1.1.6

hpicfFfLinkFlapControlPortConfigTable

table
.1.3.6.1.4.1.11.2.14.11.1.7.6.1 · 1 row entry · 4 columns
Open in standard view 
This table provides information about Link Flapping 
control configuration of all ports.
hpicfFfLinkFlapControlPortConfigEntry entry .1.3.6.1.4.1.11.2.14.11.1.7.6.1.1
This object provides information about Link Flapping
Control configuration of each port.
Indexes
hpicfFfLinkFlapControlPortIndex
Column Syntax OID
hpicfFfLinkFlapControlPortIndex
The ifIndex value which uniquely identifies a row in
the Interfaces Table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.1
hpicfFfLinkFlapControlSensitivity
The Link Flapping Control sensitivity of a port. A value
of low (1) indicates that the sensitivity of the link flap
threshold is set to 10 link flaps per 10 second interval.
A value of medium (2) indicates that the se…
Enumerationr/w
Enumerated Values:
0none
3high
6medium
10low
 .1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.2
hpicfFfLinkFlapControlAction
This object defines the action taken by the switch when
link flaps occurs on a port.
A value of none (1) indicates that no action is performed.
A value of warn (2) indicates that an event is logged when
the number of l…
Enumerationr/w
Enumerated Values:
1none
2warn
3warnAndDisable
 .1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.3
hpicfFfLinkFlapControlPortDisableTimer
This object specifies the time period for which the port
remains in disabled state. A port is disabled when
the number of link flaps reaches the threshold rate set
on that port. This time period is specified in second…
secondsUnsigned32r/w
Constraints:
range: 0-604800
 .1.3.6.1.4.1.11.2.14.11.1.7.6.1.1.4

hpicfFfMcastStormPortConfigTable

table
.1.3.6.1.4.1.11.2.14.11.1.7.7.1 · 1 row entry · 6 columns
Open in standard view 
This table provides information about Multicast Storm 
Control configuration of all ports.
hpicfFfMcastStormPortConfigEntry entry .1.3.6.1.4.1.11.2.14.11.1.7.7.1.1
This object provides information about Multicast Storm
Control configuration of each port.
Indexes
hpicfFfMcastStormPortIndex
Column Syntax OID
hpicfFfMcastStormPortIndex
The ifIndex value which uniquely identifies a row in
the Interfaces Table.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.1
hpicfFfMcastStormMode
The Mroadcast Storm Control mode of a port.
A value of disable (1) indicates that no rising
threshold value is set for multicast storm traffic on
this port. A value of mcastRisingLevelpercent (2)
indicates that the ris…
Enumerationr/w
Enumerated Values:
1disabled
2mcastRisingLevelpercent
3mcastRisingLevelpps
 .1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.2
hpicfFfMcastStormRisingpercent
This is the rising threshold Level
in percent of bandwidth of the port.
hpicfFfMcastStormControlAction occurs when
multicast traffic reaches this level.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.3
hpicfFfMcastStormRisingpps
This object indicates the rising threshold for Multicast
Storm Control. This value is in packets-per-second of
received multicast traffic.
hpicfFfMcastStormControlAction object takes action when
multicast traffic reac…
Integer32r/w
Constraints:
range: 1-10000000
 .1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.4
hpicfFfMcastStormAction
This object defines the action taken by the switch when
a multicast storm occurs on a port.
A value of none (1) indicates that no action is performed.
A value of warn (2) indicates that an event is logged when
multicas…
Enumerationr/w
Enumerated Values:
1none
2warn
3warnAndDisable
 .1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.5
hpicfFfMcastStormPortDisablTimer
This object specifies the time period for which the port
remains in disabled state. A port is disabled when
multicast traffic reaches the threshold value set on that
port. This time period is specified in seconds. The …
secondsUnsigned32r/w
Constraints:
range: 0-604800
 .1.3.6.1.4.1.11.2.14.11.1.7.7.1.1.6