hpicfFfSpeedReduceTolerance
HP-ICF-FAULT-FINDER-MIB ·
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.5
Object
column
r/w
HpicfFaultTolerance
The tolerance level used to calculate the
speed reduction threshold for this fault type.
The value of an instance of this object MUST be
greater than the value of the corresponding
instance of the hpicfFfWarnTolerance, and
less than or equal to the corresponding instance
of hpicfFfDisablePortTolerance.
The agent will only reduce speed on a port if
auto-negotiation has been performed, and the
partners link abilities allow operation at a
slower media speed.
The agent will periodically check relevant
statistics for each port for each type of fault.
If the speed reduction threshold has been exceeded,
and speed reduction option is enabled for that
fault type, an hpicfFaultFinderTrap notification
will be sent. In addition, an entry will be made
in the hpicfFfLogTable for the fault.
The agent may elect not to reduce speed or
delay speed reduction of certain ports.
For example, it may choose to delay taking
action on a cascade port to give the cascaded
device a chance to correct the problem.
Context
- MIB
- HP-ICF-FAULT-FINDER-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpicfFfControlEntry
- Table
- hpicfFfControlTable
- Siblings
- 4
Syntax
HpicfFaultTolerance
- Source
- HpicfFaultTolerance
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfFfControlIndex The type of fault for which this entry contains
configuration information. | column | HpicfFaultType | .1.3.6.1.4.1.11.2.14.11.1.7.1.1.1 |
| hpicfFfAction This object is used to configure the action,
if any, to be taken if a fault of this type is
detected by the agent. Setting an instance of
this object to 'none' will clear any prev… | column | HpicfFaultAction | .1.3.6.1.4.1.11.2.14.11.1.7.1.1.2 |
| hpicfFfWarnTolerance The tolerance level used to calculate the
fault warning threshold for this fault type.
The agent will periodically check relevant
statistics for each port for each … | column | HpicfFaultTolerance | .1.3.6.1.4.1.11.2.14.11.1.7.1.1.3 |
| hpicfFfDisablePortTolerance The tolerance level used to calculate the
port disable threshold for this fault type.
The value of an instance of this object MUST be
greater than the value of the corresponding
i… | column | HpicfFaultTolerance | .1.3.6.1.4.1.11.2.14.11.1.7.1.1.4 |