hpicfFfDisablePortTolerance
HP-ICF-FAULT-FINDER-MIB ·
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.4
Object
column
r/w
HpicfFaultTolerance
The tolerance level used to calculate the
port disable threshold for this fault type.
The value of an instance of this object MUST be
greater than the value of the corresponding
instance of the hpicfFfWarnTolerance.
The agent will periodically check relevant
statistics for each port for each type of fault.
If the port disable threshold has been exceeded,
and port disable is enabled for that fault type,
an hpicfFaultFinderTrap notification will be
sent. In addition, an entry will be made in the
hpicfFfLogTable for the fault.
Ports will not be disabled until at least one
polling interval after a warning has fired. In
addition, the agent may further delay disabling
a port in certain situations. For example, it
may choose to delay disabling a cascade port to
give the cascaded device a chance to correct the
problem.
Context
- MIB
- HP-ICF-FAULT-FINDER-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.1.7.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpicfFfControlEntry
- Table
- hpicfFfControlTable
- Siblings
- 4
Syntax
HpicfFaultTolerance
- Source
- HpicfFaultTolerance
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfFfControlIndex The type of fault for which this entry contains
configuration information. | column | HpicfFaultType | .1.3.6.1.4.1.11.2.14.11.1.7.1.1.1 |
| hpicfFfAction This object is used to configure the action,
if any, to be taken if a fault of this type is
detected by the agent. Setting an instance of
this object to 'none' will clear any prev… | column | HpicfFaultAction | .1.3.6.1.4.1.11.2.14.11.1.7.1.1.2 |
| hpicfFfWarnTolerance The tolerance level used to calculate the
fault warning threshold for this fault type.
The agent will periodically check relevant
statistics for each port for each … | column | HpicfFaultTolerance | .1.3.6.1.4.1.11.2.14.11.1.7.1.1.3 |
| hpicfFfSpeedReduceTolerance The tolerance level used to calculate the
speed reduction threshold for this fault type.
The value of an instance of this object MUST be
greater than the value of the correspondin… | column | HpicfFaultTolerance | .1.3.6.1.4.1.11.2.14.11.1.7.1.1.5 |