HM2-WWAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
65

hm2WwanDataConnectionTable

table
.1.3.6.1.4.1.248.11.125.1.2.1 · 1 row entry · 29 columns
Open in standard view 
This table contains configuration options for each
WWAN Data connection per SIM card.
hm2WwanDataConnectionEntry entry .1.3.6.1.4.1.248.11.125.1.2.1.1
The entries of the table.
Indexes
hm2WwanDataConnectionSimId
Column Syntax OID
hm2WwanDataConnectionSimId
SIM ID for which this connection entry belongs to. Also
used as the table's index.
Hm2SimCardsListIndex
Textual Convention: Hm2SimCardsListIndex Enumeration
Type Values:
0sim1
1sim2
2sim3
3sim4
 .1.3.6.1.4.1.248.11.125.1.2.1.1.1
hm2WwanDataConnectionAdminStatus
Operational mode of the connection.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.125.1.2.1.1.2
hm2WwanDataConnectionApn
Access Point Name used to identify the data connection's
gateway name in the carriers network. If empty then the
default APN configured on the SIM card will be used. APN
value change while the connection is active, will…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.248.11.125.1.2.1.1.3
hm2WwanDataConnectionApnCurrent
Current Access Point Name used for data connections. If
hm2WwanDataConnectionApn is empty then the value shown here
represents the automatically detected APN stored on the
Sim Card.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.248.11.125.1.2.1.1.4
hm2WwanDataConnectionUser
User name used for authentication when settting up a new
data connection. Empty value means its not required.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.248.11.125.1.2.1.1.5
hm2WwanDataConnectionPassword
Pasword asociated with the user name used for authentication
when settting up a new data connection. Not readable by the user.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.248.11.125.1.2.1.1.6
hm2WwanDataConnectionAuth
The type of authentication used when setting up a data
connection.
Hm2AuthTyper/w
Textual Convention: Hm2AuthType Enumeration
Type Values:
1none
2pap
3chap
4papchap
 .1.3.6.1.4.1.248.11.125.1.2.1.1.7
hm2WwanDataConnectionPdpType
The IP type of the data connection to set up. It can be
IPv4 or IPv6. Currently only IPv4 is supported.
Hm2PdpTyper/w
Textual Convention: Hm2PdpType Enumeration
Type Values:
1ipv4
2ipv6
3ipv4v6
 .1.3.6.1.4.1.248.11.125.1.2.1.1.8
hm2WwanDataConnectionIpAddressType
hm2WwanDataConnectionIpAddress value type, either IPv4
or IPv6.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.11.125.1.2.1.1.9
hm2WwanDataConnectionIpAddress
Manual IP address to be used for configuring a new data
connection. If 0.0.0.0 then a dynamic IP Address will be
assigned by the carrier.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.125.1.2.1.1.10
hm2WwanDataConnectionDnsPrimaryType
hm2WwanDataConnectionDnsPrimary value type, either IPv4
or IPv6.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.11.125.1.2.1.1.11
hm2WwanDataConnectionDnsPrimary
Manual IP address to be used for configuring the primary
DNS server address for the data connection. If 0.0.0.0
then a dynamic DNS IP Address will be assigned by the carrier.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.125.1.2.1.1.12
hm2WwanDataConnectionDnsSecondaryType
hm2WwanDataConnectionDnsSecondary value type, either IPv4
or IPv6.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.11.125.1.2.1.1.13
hm2WwanDataConnectionDnsSecondary
Manual IP address to be used for configuring the secondary
DNS server address for the data connection. If 0.0.0.0
then a dynamic DNS IP Address will be assigned by the carrier.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.125.1.2.1.1.14
hm2WwanDataConnectionIpAddressCurrentType
hm2WwanDataConnectionIpAddressCurrent value type, either IPv4
or IPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.11.125.1.2.1.1.15
hm2WwanDataConnectionIpAddressCurrent
The IP Address that the WWAN data interface is currently
using.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.125.1.2.1.1.16
hm2WwanDataConnectionDnsPrimaryCurrentType
hm2WwanDataConnectionDnsPrimaryCurrent value type, either IPv4
or IPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.11.125.1.2.1.1.17
hm2WwanDataConnectionDnsPrimaryCurrent
The Primary DNS Address that the WWAN data interface
is currently using.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.125.1.2.1.1.18
hm2WwanDataConnectionDnsSecondaryCurrentType
hm2WwanDataConnectionDnsSecondaryCurrent value type, either IPv4
or IPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.11.125.1.2.1.1.19
hm2WwanDataConnectionDnsSecondaryCurrent
The Secondary DNS Address that the WWAN data interface
is currently using.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.125.1.2.1.1.20
hm2WwanDataConnectionMtu
Maximum Transmision Unit used when sending IP packets
over the WWAN data interface. The MTU value is reported
by the wwan modem.
Integer32
Constraints:
range: 0-1500
 .1.3.6.1.4.1.248.11.125.1.2.1.1.21
hm2WwanDataConnectionFailedRetry
How many times should a failed WWAN data connection
attempt to try reconnecting before aborting and using
fallback options or logging error. A value of 0 means
no retry attempts and a value of -1 means 'infinite'
attem…
Integer32r/w
Constraints:
range: -1-32
 .1.3.6.1.4.1.248.11.125.1.2.1.1.22
hm2WwanDataConnectionFailedRetryCurrent
The current number o data reconnect attempts made.
Value 0 means no retries have been made.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.11.125.1.2.1.1.23
hm2WwanDataConnectionStatus
Current status of this WWAN Data connection. If in 'Error'
state then a reason for the error will be found under
hm2WwanDataConnectionStatusErrorReason.
Hm2ConnectionStatus
Textual Convention: Hm2ConnectionStatus Enumeration
Type Values:
1inactive
2active
3idle
4connecting
5reconnecting
6failure
 .1.3.6.1.4.1.248.11.125.1.2.1.1.24
hm2WwanDataConnectionStatusErrorReason
The reason why this WWAN Data connection is in 'Error'
state.
HM2-TC-MIBHmLargeDisplayString
Textual Convention: HM2-TC-MIBHmLargeDisplayString OctetString
Type Constraints:
range: 0..1024
 .1.3.6.1.4.1.248.11.125.1.2.1.1.25
hm2WwanDataConnectionActivatedCount
How many times this WWAN Data connection was successfuly
established.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.11.125.1.2.1.1.26
hm2WwanDataConnectionStartTime
Time in seconds since Jan 1, 1970.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.11.125.1.2.1.1.27
hm2WwanDataConnectionUpTime
Time in seconds since this connection is active.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.11.125.1.2.1.1.28
hm2WwanDataConnectionTotalUpTime
Total time in which this connection was active.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.11.125.1.2.1.1.29

hm2WwanDataPlanTable

table
.1.3.6.1.4.1.248.11.125.1.2.2 · 1 row entry · 10 columns
Open in standard view 
This table contains configuration options for each
WWAN Data Plan per SIM card.
hm2WwanDataPlanEntry entry .1.3.6.1.4.1.248.11.125.1.2.2.1
The entries of the table.
Indexes
hm2WwanDataPlanSimId
Column Syntax OID
hm2WwanDataPlanSimId
SIM ID for which this connection entry belongs. Also
used as the table's index.
Hm2SimCardsListIndex
Textual Convention: Hm2SimCardsListIndex Enumeration
Type Values:
0sim1
1sim2
2sim3
3sim4
 .1.3.6.1.4.1.248.11.125.1.2.2.1.1
hm2WwanDataPlanMonthlyLimit
The amount of data that the carrier will charge as
per a WWAN data contract per month. A value 0 means
unlimited.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.11.125.1.2.2.1.2
hm2WwanDataPlanLimitMeasureUnit
Which measure unit is used to interpret the volume
of the data traffic. Possible units are: Kilobytes,
Megabytes, Gigabytes.
Hm2LimitUnitr/w
Textual Convention: Hm2LimitUnit Enumeration
Type Values:
1kb
2mb
3gb
 .1.3.6.1.4.1.248.11.125.1.2.2.1.3
hm2WwanDataPlanWarningThreshold
The percentage of the volume of data that when reached
will generate a warning. A value of 0 will disable the
warning.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.248.11.125.1.2.2.1.4
hm2WwanDataPlanReset
Manually reset the data plan counters. Only the value
'action(2)' can be written and when read 'noop(1)' will
always be returned.
HM2-TC-MIBHmActionValuer/w
Textual Convention: HM2-TC-MIBHmActionValue Enumeration
Type Values:
1noop
2action
 .1.3.6.1.4.1.248.11.125.1.2.2.1.5
hm2WwanDataPlanResetDay
Which day of the month will be used to auto reset the data
plan counters. A value of 0 will disable the reset action.
The reset action will be performed at 00:00am in the
selected day.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.248.11.125.1.2.2.1.6
hm2WwanDataPlanLastReset
Time in seconds since Jan 1st, 1970 when the last data
plan counters were resetted.
HM2-TC-MIBHmTimeSeconds1970
Textual Convention: HM2-TC-MIBHmTimeSeconds1970 Unsigned32
 .1.3.6.1.4.1.248.11.125.1.2.2.1.7
hm2WwanDataPlanCutoffThreshold
The percentage of the volume of used data that when reached
will completely disable any data connections associated with
this SIM ID. A value of 0 will disable the cutoff.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.11.125.1.2.2.1.8
hm2WwanDataPlanMonthlyUsageTx
The amount of data that was transmitted since last reset. The
measure unit is the same as hm2WwanDataPlanLimitMeasureUnit.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.248.11.125.1.2.2.1.9
hm2WwanDataPlanMonthlyUsageRx
The amount of data that was received since last reset. The
measure unit is the same as hm2WwanDataPlanLimitMeasureUnit.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.248.11.125.1.2.2.1.10

hm2WwanDataPacketStatsTable

table
.1.3.6.1.4.1.248.11.125.1.2.3 · 1 row entry · 11 columns
Open in standard view 
This table contains packet statistics for each
WWAN Data connection per SIM card.
hm2WwanDataPacketStatsEntry entry .1.3.6.1.4.1.248.11.125.1.2.3.1
The entries of the table.
Indexes
hm2WwanDataPacketStatsSimId
Column Syntax OID
hm2WwanDataPacketStatsSimId
SIM ID for which this data connection packet statistics
entry belongs to. Also used as the table's index.
Hm2SimCardsListIndex
Textual Convention: Hm2SimCardsListIndex Enumeration
Type Values:
0sim1
1sim2
2sim3
3sim4
 .1.3.6.1.4.1.248.11.125.1.2.3.1.1
hm2WwanDataPacketStatsTxOk
The number of successfully transmitted data packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.248.11.125.1.2.3.1.2
hm2WwanDataPacketStatsRxOk
The number of successfully received data packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.248.11.125.1.2.3.1.3
hm2WwanDataPacketStatsTxErrors
The number of errors encountered during packet transmission.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.248.11.125.1.2.3.1.4
hm2WwanDataPacketStatsRxErrors
The number of errors encountered during packet reception.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.248.11.125.1.2.3.1.5
hm2WwanDataPacketStatsTxOverflows
The number of overflows encountered during packet transmission.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.248.11.125.1.2.3.1.6
hm2WwanDataPacketStatsRxOverflows
The number of overflows encountered during packet reception.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.248.11.125.1.2.3.1.7
hm2WwanDataPacketStatsTxBytesOk
The number of successfully transmitted bytes.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.248.11.125.1.2.3.1.8
hm2WwanDataPacketStatsRxBytesOk
The number of successfully received bytes.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.248.11.125.1.2.3.1.9
hm2WwanDataPacketStatsTxDropped
The number of packets dropped during transmission.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.248.11.125.1.2.3.1.10
hm2WwanDataPacketStatsRxDropped
The number of packets dropped during reception.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.248.11.125.1.2.3.1.11

hm2WwanSimCardTable

table
.1.3.6.1.4.1.248.11.125.1.3.1 · 1 row entry · 15 columns
Open in standard view 
This table contains configuration options for each
WWAN SIM card.
hm2WwanSimCardEntry entry .1.3.6.1.4.1.248.11.125.1.3.1.1
The entries of the table.
Indexes
hm2WwanSimCardSimId
Column Syntax OID
hm2WwanSimCardSimId
SIM ID for which this connection entry belongs. Also
used as the table's index.
Hm2SimCardsListIndex
Textual Convention: Hm2SimCardsListIndex Enumeration
Type Values:
0sim1
1sim2
2sim3
3sim4
 .1.3.6.1.4.1.248.11.125.1.3.1.1.1
hm2WwanSimCardAdminStatus
Sim Card enable/disable function.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.125.1.3.1.1.2
hm2WwanSimCardRole
The role this Sim Card will be assigned. The role is
important for failover scenarios configured under
General Configuration Group. 'auto' setting will
automatically choose a role.
Hm2SimCardRoler/w
Textual Convention: Hm2SimCardRole Enumeration
Type Values:
1auto
2primary
3backup
 .1.3.6.1.4.1.248.11.125.1.3.1.1.3
hm2WwanSimCardRoleCurrent
The role this Sim Card is currently using.
Hm2SimCardRole
Textual Convention: Hm2SimCardRole Enumeration
Type Values:
1auto
2primary
3backup
 .1.3.6.1.4.1.248.11.125.1.3.1.1.4
hm2WwanSimCardStatus
Sim Card Status information:
* simPresent: the SIM is physicaly present.
* simAbsent: the SIM is physicaly absent.
* simLocked: the SIM is physicaly present
but was not unlocked using PIN1.
* simUnlocked: t…
Hm2SimCardStatus
Textual Convention: Hm2SimCardStatus Enumeration
Type Values:
1simPresent
2simAbsent
3simLocked
4simUnlocked
5simInactive
6simActive
 .1.3.6.1.4.1.248.11.125.1.3.1.1.5
hm2WwanSimCardSetActive
Manual operation to set the active status of this
sim card. When in active state this sim card will be
used for establishing data connections.
HM2-TC-MIBHmActionValuer/w
Textual Convention: HM2-TC-MIBHmActionValue Enumeration
Type Values:
1noop
2action
 .1.3.6.1.4.1.248.11.125.1.3.1.1.6
hm2WwanSimCardPin1
Sim Card's PIN1 code. PIN1 is used to unlock main Sim
functions which will allow Network Carrier Registration.
OctetStringr/w
Constraints:
range: 4-8
range: 0-0
 .1.3.6.1.4.1.248.11.125.1.3.1.1.7
hm2WwanSimCardPin1Mode
Allows to enable or disable PIN1 code. With PIN1 disabled
the Sim Card will automatically unlock all it's functions.
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.125.1.3.1.1.8
hm2WwanSimCardPin1Status
Pin1 status information:
* NotVerified: Pin1 was not verified.
* Verified: Pin1 was successfuly verified.
* Blocked: Wrong Pin1 was used too many times
and the Sim Card blocked it.
* Disabled: Pin1 was manual…
Hm2Pin1Status
Textual Convention: Hm2Pin1Status Enumeration
Type Values:
1notVerified
2verified
3blocked
4disabled
5wrongCode
 .1.3.6.1.4.1.248.11.125.1.3.1.1.9
hm2WwanSimCardPin1VerifyTries
The amount of times a wrong Pin1 code can be used
to unlock the Sim Card until it is blocked.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.11.125.1.3.1.1.10
hm2WwanSimCardPin1UnblockTries
The amount of times a wrong PUK1 code can be entered
to unblock a PIN1 code.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.11.125.1.3.1.1.11
hm2WwanSimCardPuk1
PUK1 code is used to unblock a PIN1 code. Writing a PUK1
value will attempt to unblock a PIN1 code if the PIN1 code
is in 'Blocked' state. PUK1 code will not be saved.
hm2WwanSimCardPin1UnblockTries is a counter on how …
OctetStringr/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.248.11.125.1.3.1.1.12
hm2WwanSimCardRoamingMode
Roaming will allow the modem to perform registration
with carriers other than the one that emitted the current
SIM card. Data connections established when attached to
Roaming partners will probably incur additional cost…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.125.1.3.1.1.13
hm2WwanSimCardIccid
Integrated Circuit Card Identifier is the international
SIM's identifier. This value is preserved over reboots
so that when a new SIM is inserted the operation can be
detected and the settings relevant for the old SIM …
OctetStringr/w
Constraints:
range: 22-22
range: 0-0
 .1.3.6.1.4.1.248.11.125.1.3.1.1.14
hm2WwanSimCardImsi
International Mobile Subscriber Identity is an individual
identifier on operator networks. Mobile network operators
connect mobile phone calls and communicate with their market
SIM cards using their IMSIs.
OctetString
Constraints:
range: 15-15
range: 0-0
 .1.3.6.1.4.1.248.11.125.1.3.1.1.15