hm2WwanSimCardPin1Mode
HM2-WWAN-MIB ·
.1.3.6.1.4.1.248.11.125.1.3.1.1.8
Object
Allows to enable or disable PIN1 code. With PIN1 disabled the Sim Card will automatically unlock all it's functions.
Context
- MIB
- HM2-WWAN-MIB
- OID
.1.3.6.1.4.1.248.11.125.1.3.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hm2WwanSimCardEntry
- Table
- hm2WwanSimCardTable
- Siblings
- 14
Syntax
HM2-TC-MIBHmEnabledStatus
- Source
- HM2-TC-MIBHmEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2WwanSimCardSimId SIM ID for which this connection entry belongs. Also
used as the table's index. | column | Hm2SimCardsListIndex | .1.3.6.1.4.1.248.11.125.1.3.1.1.1 |
| hm2WwanSimCardPin1VerifyTries The amount of times a wrong Pin1 code can be used
to unlock the Sim Card until it is blocked. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.3.1.1.10 |
| hm2WwanSimCardPin1UnblockTries The amount of times a wrong PUK1 code can be entered
to unblock a PIN1 code. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.125.1.3.1.1.11 |
| hm2WwanSimCardPuk1 PUK1 code is used to unblock a PIN1 code. Writing a PUK1
value will attempt to unblock a PIN1 code if the PIN1 code
is in 'Blocked' state. PUK1 code will not be saved.
hm2WwanSimC… | column | OctetString | .1.3.6.1.4.1.248.11.125.1.3.1.1.12 |
| hm2WwanSimCardRoamingMode Roaming will allow the modem to perform registration
with carriers other than the one that emitted the current
SIM card. Data connections established when attached to
Roaming part… | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.125.1.3.1.1.13 |
| hm2WwanSimCardIccid Integrated Circuit Card Identifier is the international
SIM's identifier. This value is preserved over reboots
so that when a new SIM is inserted the operation can be
detected an… | column | OctetString | .1.3.6.1.4.1.248.11.125.1.3.1.1.14 |
| hm2WwanSimCardImsi International Mobile Subscriber Identity is an individual
identifier on operator networks. Mobile network operators
connect mobile phone calls and communicate with their market
S… | column | OctetString | .1.3.6.1.4.1.248.11.125.1.3.1.1.15 |
| hm2WwanSimCardAdminStatus Sim Card enable/disable function. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.125.1.3.1.1.2 |
| hm2WwanSimCardRole The role this Sim Card will be assigned. The role is
important for failover scenarios configured under
General Configuration Group. 'auto' setting will
automatically choose a rol… | column | Hm2SimCardRole | .1.3.6.1.4.1.248.11.125.1.3.1.1.3 |
| hm2WwanSimCardRoleCurrent The role this Sim Card is currently using. | column | Hm2SimCardRole | .1.3.6.1.4.1.248.11.125.1.3.1.1.4 |
| hm2WwanSimCardStatus Sim Card Status information:
* simPresent: the SIM is physicaly present.
* simAbsent: the SIM is physicaly absent.
* simLocked: the SIM is physicaly present
but was n… | column | Hm2SimCardStatus | .1.3.6.1.4.1.248.11.125.1.3.1.1.5 |
| hm2WwanSimCardSetActive Manual operation to set the active status of this
sim card. When in active state this sim card will be
used for establishing data connections. | column | HM2-TC-MIBHmActionValue | .1.3.6.1.4.1.248.11.125.1.3.1.1.6 |
| hm2WwanSimCardPin1 Sim Card's PIN1 code. PIN1 is used to unlock main Sim
functions which will allow Network Carrier Registration. | column | OctetString | .1.3.6.1.4.1.248.11.125.1.3.1.1.7 |
| hm2WwanSimCardPin1Status Pin1 status information:
* NotVerified: Pin1 was not verified.
* Verified: Pin1 was successfuly verified.
* Blocked: Wrong Pin1 was used too many times
and the Sim Card… | column | Hm2Pin1Status | .1.3.6.1.4.1.248.11.125.1.3.1.1.9 |