hm2WwanDataConnectionAuth

HM2-WWAN-MIB · .1.3.6.1.4.1.248.11.125.1.2.1.1.7
MIB view Table view

Object

column r/w Hm2AuthType 
The type of authentication used when setting up a data
connection.

Context

MIB
HM2-WWAN-MIB
OID
.1.3.6.1.4.1.248.11.125.1.2.1.1.7
Type
column
Access
readwrite
Status
current
Parent
hm2WwanDataConnectionEntry
Table
hm2WwanDataConnectionTable
Siblings
28

Syntax

Hm2AuthType
Source
Hm2AuthType
Base type
Enumeration

Values & Constraints

Type Values
1none
2pap
3chap
4papchap

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2WwanDataConnectionSimId
SIM ID for which this connection entry belongs to. Also used as the table's index.
columnHm2SimCardsListIndex.1.3.6.1.4.1.248.11.125.1.2.1.1.1
hm2WwanDataConnectionIpAddress
Manual IP address to be used for configuring a new data connection. If 0.0.0.0 then a dynamic IP Address will be assigned by the carrier.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.248.11.125.1.2.1.1.10
hm2WwanDataConnectionDnsPrimaryType
hm2WwanDataConnectionDnsPrimary value type, either IPv4 or IPv6.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.248.11.125.1.2.1.1.11
hm2WwanDataConnectionDnsPrimary
Manual IP address to be used for configuring the primary DNS server address for the data connection. If 0.0.0.0 then a dynamic DNS IP Address will be assigned by the carrier.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.248.11.125.1.2.1.1.12
hm2WwanDataConnectionDnsSecondaryType
hm2WwanDataConnectionDnsSecondary value type, either IPv4 or IPv6.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.248.11.125.1.2.1.1.13
hm2WwanDataConnectionDnsSecondary
Manual IP address to be used for configuring the secondary DNS server address for the data connection. If 0.0.0.0 then a dynamic DNS IP Address will be assigned by the carrier.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.248.11.125.1.2.1.1.14
hm2WwanDataConnectionIpAddressCurrentType
hm2WwanDataConnectionIpAddressCurrent value type, either IPv4 or IPv6.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.248.11.125.1.2.1.1.15
hm2WwanDataConnectionIpAddressCurrent
The IP Address that the WWAN data interface is currently using.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.248.11.125.1.2.1.1.16
hm2WwanDataConnectionDnsPrimaryCurrentType
hm2WwanDataConnectionDnsPrimaryCurrent value type, either IPv4 or IPv6.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.248.11.125.1.2.1.1.17
hm2WwanDataConnectionDnsPrimaryCurrent
The Primary DNS Address that the WWAN data interface is currently using.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.248.11.125.1.2.1.1.18
hm2WwanDataConnectionDnsSecondaryCurrentType
hm2WwanDataConnectionDnsSecondaryCurrent value type, either IPv4 or IPv6.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.248.11.125.1.2.1.1.19
hm2WwanDataConnectionAdminStatus
Operational mode of the connection.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.125.1.2.1.1.2
hm2WwanDataConnectionDnsSecondaryCurrent
The Secondary DNS Address that the WWAN data interface is currently using.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.248.11.125.1.2.1.1.20
hm2WwanDataConnectionMtu
Maximum Transmision Unit used when sending IP packets over the WWAN data interface. The MTU value is reported by the wwan modem.
columnInteger32.1.3.6.1.4.1.248.11.125.1.2.1.1.21
hm2WwanDataConnectionFailedRetry
How many times should a failed WWAN data connection attempt to try reconnecting before aborting and using fallback options or logging error. A value of 0 means no retry attempts …
columnInteger32.1.3.6.1.4.1.248.11.125.1.2.1.1.22
hm2WwanDataConnectionFailedRetryCurrent
The current number o data reconnect attempts made. Value 0 means no retries have been made.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.248.11.125.1.2.1.1.23
hm2WwanDataConnectionStatus
Current status of this WWAN Data connection. If in 'Error' state then a reason for the error will be found under hm2WwanDataConnectionStatusErrorReason.
columnHm2ConnectionStatus.1.3.6.1.4.1.248.11.125.1.2.1.1.24
hm2WwanDataConnectionStatusErrorReason
The reason why this WWAN Data connection is in 'Error' state.
columnHM2-TC-MIBHmLargeDisplayString.1.3.6.1.4.1.248.11.125.1.2.1.1.25
hm2WwanDataConnectionActivatedCount
How many times this WWAN Data connection was successfuly established.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.248.11.125.1.2.1.1.26
hm2WwanDataConnectionStartTime
Time in seconds since Jan 1, 1970.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.248.11.125.1.2.1.1.27
hm2WwanDataConnectionUpTime
Time in seconds since this connection is active.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.248.11.125.1.2.1.1.28
hm2WwanDataConnectionTotalUpTime
Total time in which this connection was active.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.248.11.125.1.2.1.1.29
hm2WwanDataConnectionApn
Access Point Name used to identify the data connection's gateway name in the carriers network. If empty then the default APN configured on the SIM card will be used. APN value cha…
columnOctetString.1.3.6.1.4.1.248.11.125.1.2.1.1.3
hm2WwanDataConnectionApnCurrent
Current Access Point Name used for data connections. If hm2WwanDataConnectionApn is empty then the value shown here represents the automatically detected APN stored on the Sim Car…
columnOctetString.1.3.6.1.4.1.248.11.125.1.2.1.1.4
hm2WwanDataConnectionUser
User name used for authentication when settting up a new data connection. Empty value means its not required.
columnOctetString.1.3.6.1.4.1.248.11.125.1.2.1.1.5
hm2WwanDataConnectionPassword
Pasword asociated with the user name used for authentication when settting up a new data connection. Not readable by the user.
columnOctetString.1.3.6.1.4.1.248.11.125.1.2.1.1.6
hm2WwanDataConnectionPdpType
The IP type of the data connection to set up. It can be IPv4 or IPv6. Currently only IPv4 is supported.
columnHm2PdpType.1.3.6.1.4.1.248.11.125.1.2.1.1.8
hm2WwanDataConnectionIpAddressType
hm2WwanDataConnectionIpAddress value type, either IPv4 or IPv6.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.248.11.125.1.2.1.1.9