HM2-POE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hm2PoeMgmtPsuTable

table

.1.3.6.1.4.1.248.11.12.1.1.2 · 1 row entry · 4 columns

Open in standard view

This table contains objects for each power supply type of
the device (internal or external power supply).

hm2PoeMgmtPsuEntry entry .1.3.6.1.4.1.248.11.12.1.1.2.1

The entries of the hm2PoeMgmtPsuTable.

Indexes

hm2PoeMgmtModulePowerSource

Column	Syntax	OID
hm2PoeMgmtPsuPower The power budget per psu type expressed in Watts. Psu types could be internal or external.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.12.1.1.2.1.1`
hm2PoeMgmtPsuReservedPower The reserved power (depending on actual power classes) per psu type expressed in Watts.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.12.1.1.2.1.2`
hm2PoeMgmtPsuDeliveredPower The measured usage power per psu type expressed in Watts.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.12.1.1.2.1.3`
hm2PoeMgmtPsuDeliveredCurrent The measured current delivered per psu type expressed in milliamperes	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.12.1.1.2.1.4`

hm2PoeMgmtPortTable

table

.1.3.6.1.4.1.248.11.12.1.1.3 · 1 row entry · 15 columns

Open in standard view

This table contains objects for each Power over Ethernet interface of
the device.

hm2PoeMgmtPortEntry entry .1.3.6.1.4.1.248.11.12.1.1.3.1

The entry of the hm2PoeMgmtPortTable.

Indexes

HM2-DEVMGMT-MIBhm2IfacePhysIndex

Column Syntax OID

hm2PoeMgmtPortAdminEnable

enable (1) An interface which can provide the PSE functions.
disable(2) The interface will act - as it would - if it had no PSE
function.

HM2-TC-MIBHmEnabledStatusr/w

Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.12.1.1.3.1.1

hm2PoeMgmtPortConsumptionPower

Measured usage power per interface expressed in Milliwatts.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.12.1.1.3.1.2

hm2PoeMgmtPortDetectionStatus

Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram
is in the state DISABLED.
A value of deliveringPower(3) - indicates that the PSE State
diagram is i…

Enumeration

Enumerated Values:

1	disabled
2	searching
3	deliveringPower
4	fault
5	test
6	otherFault

.1.3.6.1.4.1.248.11.12.1.1.3.1.3

hm2PoeMgmtPortPowerPriority

This object controls the priority of the port from the point
of view of a power management algorithm. The priority that
is set by this variable could be used by a control mechanism
that prevents over current situations…

Enumerationr/w

Enumerated Values:

1	critical
2	high
3	low

.1.3.6.1.4.1.248.11.12.1.1.3.1.4

hm2PoeMgmtPortPowerClassification

Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others,
will be classified according to their …

Enumeration

Enumerated Values:

1	class0
2	class1
3	class2
4	class3
5	class4

.1.3.6.1.4.1.248.11.12.1.1.3.1.5

hm2PoeMgmtPortName

A manager will set the value of this variable to indicate
the type of powered device that is connected to the port.
The default value supplied by the agent if no value has
ever been set should be a zero-length octet str…

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.248.11.12.1.1.3.1.6

hm2PoeMgmtPortAllowedClassBits

Bit mask which defines allowed classes per interface.

Bitsr/w

Enumerated Values:

0	class0
1	class1
2	class2
3	class3
4	class4

.1.3.6.1.4.1.248.11.12.1.1.3.1.7

hm2PoeMgmtPortAutoShutdown

Enables/disables automatic shutdown functionality per interface.

HM2-TC-MIBHmEnabledStatusr/w

Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.12.1.1.3.1.8

hm2PoeMgmtPortAutoShutdownTimeStart

Start time for the automatic shutdown functionality per interface.

HM2-TC-MIBHmTimeHHMM24r/w

Textual Convention: HM2-TC-MIBHmTimeHHMM24 OctetString

Type Constraints:
range: 0..5

.1.3.6.1.4.1.248.11.12.1.1.3.1.9

hm2PoeMgmtPortAutoShutdownTimeEnd

End time for the automatic shutdown functionality per interface.

HM2-TC-MIBHmTimeHHMM24r/w

Textual Convention: HM2-TC-MIBHmTimeHHMM24 OctetString

Type Constraints:
range: 0..5

.1.3.6.1.4.1.248.11.12.1.1.3.1.10

hm2PoeMgmtPortClassValid

Evaluates if class represented through pethPsePortPowerClassifications
is valid or not. Class is valid if PD is delivered with power or in case
of power exceeding through a connected device.

Enumeration

Enumerated Values:

0	invalid
1	valid

.1.3.6.1.4.1.248.11.12.1.1.3.1.11

hm2PoeMgmtPortFastStartup

Enables/disables Power over Ethernet fast startup mode on given port.
The default value is 'disable'.

HM2-TC-MIBHmEnabledStatusr/w

Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.12.1.1.3.1.12

hm2PoeMgmtPortMaxConsumptionPower

The maximum observed power consumption (hm2PoeMgmtPortMaxConsumptionPower)
value expressed in milliwatts used by the PD.
The value is reset to 0 if the PoE admin state is set to disable
or if a disconnect of the PD is …

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.12.1.1.3.1.13

hm2PoeMgmtPortPowerLimit

The power limit per port expressed in milliwatts. If set to
zero the power consumption limitation is disabled.

Integer32r/w

Constraints:
range: 0-30000

.1.3.6.1.4.1.248.11.12.1.1.3.1.14

hm2PoeMgmtPortConsumptionCurrent

Measured current consumption per interface expressed in milliamperes (mA).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.12.1.1.3.1.15

hm2PoeMgmtModuleTable

table

.1.3.6.1.4.1.248.11.12.1.1.4 · 1 row entry · 10 columns

Open in standard view

This table contains objects for each plugged PoE module of
the device. If the device is non-modular and supports PoE it
contains only one entry.

hm2PoeMgmtModuleEntry entry .1.3.6.1.4.1.248.11.12.1.1.4.1

The entries of the hm2PoeMgmtModuleTable.

Indexes

hm2PoeMgmtModuleUnitIndex hm2PoeMgmtModuleSlotIndex

Column Syntax OID

hm2PoeMgmtModuleUnitIndex

Unit number - for stacking devices.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.12.1.1.4.1.1

hm2PoeMgmtModuleSlotIndex

Slot number of the plugged PoE module.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.12.1.1.4.1.2

hm2PoeMgmtModulePower

Configurable power budget per module expressed in Watts. The default
value is hm2PoeMgmtModuleMaximumPower and depends on the hardware.

Integer32r/w

Constraints:
range: 0-1000

.1.3.6.1.4.1.248.11.12.1.1.4.1.3

hm2PoeMgmtModuleMaximumPower

Maximum available power budget per module expressed in Watts. This
value depends on the device or module.

Integer32

Constraints:
range: 0-1000

.1.3.6.1.4.1.248.11.12.1.1.4.1.4

hm2PoeMgmtModuleReservedPower

The reserved power (depending on actual power classes)
per module expressed in Watts.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.12.1.1.4.1.5

hm2PoeMgmtModuleDeliveredPower

The measured usage power per module expressed in Watts.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.12.1.1.4.1.6

hm2PoeMgmtModulePowerSource

This object displays the type of the PoE power source.
internal (0) means that the PoE power is used from the internal PSU and
external (1) means that a external PoE PSU must be installed and connected to this module.

Enumeration

Enumerated Values:

0	internal
1	external

.1.3.6.1.4.1.248.11.12.1.1.4.1.7

hm2PoeMgmtModuleUsageThreshold

The usage power threshold per module expressed in percent.
If this threshold is exceeded a alarm is initiated.

Integer32r/w

Constraints:
range: 1-99

.1.3.6.1.4.1.248.11.12.1.1.4.1.8

hm2PoeMgmtModuleNotificationControlEnable

This object controls, on a per-module basis, whether
or not notifications from the agent are enabled.

HM2-TC-MIBHmEnabledStatusr/w

Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.12.1.1.4.1.9

hm2PoeMgmtModuleDeliveredCurrent

The measured current consumption per module expressed in milliamperes (mA).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.12.1.1.4.1.10