hm2PoeMgmtPortName
HM2-POE-MIB ·
.1.3.6.1.4.1.248.11.12.1.1.3.1.6
Object
column
r/w
OctetString
A manager will set the value of this variable to indicate the type of powered device that is connected to the port. The default value supplied by the agent if no value has ever been set should be a zero-length octet string.
Context
- MIB
- HM2-POE-MIB
- OID
.1.3.6.1.4.1.248.11.12.1.1.3.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hm2PoeMgmtPortEntry
- Table
- hm2PoeMgmtPortTable
- Siblings
- 14
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2PoeMgmtPortAdminEnable enable (1) An interface which can provide the PSE functions.
disable(2) The interface will act - as it would - if it had no PSE
function. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.12.1.1.3.1.1 |
| hm2PoeMgmtPortAutoShutdownTimeEnd End time for the automatic shutdown functionality per interface. | column | HM2-TC-MIBHmTimeHHMM24 | .1.3.6.1.4.1.248.11.12.1.1.3.1.10 |
| hm2PoeMgmtPortClassValid Evaluates if class represented through pethPsePortPowerClassifications
is valid or not. Class is valid if PD is delivered with power or in case
of power exceeding through a connec… | column | Enumeration | .1.3.6.1.4.1.248.11.12.1.1.3.1.11 |
| hm2PoeMgmtPortFastStartup Enables/disables Power over Ethernet fast startup mode on given port.
The default value is 'disable'. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.12.1.1.3.1.12 |
| hm2PoeMgmtPortMaxConsumptionPower The maximum observed power consumption (hm2PoeMgmtPortMaxConsumptionPower)
value expressed in milliwatts used by the PD.
The value is reset to 0 if the PoE admin state is set to … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.12.1.1.3.1.13 |
| hm2PoeMgmtPortPowerLimit The power limit per port expressed in milliwatts. If set to
zero the power consumption limitation is disabled. | column | Integer32 | .1.3.6.1.4.1.248.11.12.1.1.3.1.14 |
| hm2PoeMgmtPortConsumptionCurrent Measured current consumption per interface expressed in milliamperes (mA). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.12.1.1.3.1.15 |
| hm2PoeMgmtPortConsumptionPower Measured usage power per interface expressed in Milliwatts. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.11.12.1.1.3.1.2 |
| hm2PoeMgmtPortDetectionStatus Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram
is in the state DISABLED.
A value of deliveringPower(3) - i… | column | Enumeration | .1.3.6.1.4.1.248.11.12.1.1.3.1.3 |
| hm2PoeMgmtPortPowerPriority This object controls the priority of the port from the point
of view of a power management algorithm. The priority that
is set by this variable could be used by a control mechani… | column | Enumeration | .1.3.6.1.4.1.248.11.12.1.1.3.1.4 |
| hm2PoeMgmtPortPowerClassification Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others… | column | Enumeration | .1.3.6.1.4.1.248.11.12.1.1.3.1.5 |
| hm2PoeMgmtPortAllowedClassBits Bit mask which defines allowed classes per interface. | column | Bits | .1.3.6.1.4.1.248.11.12.1.1.3.1.7 |
| hm2PoeMgmtPortAutoShutdown Enables/disables automatic shutdown functionality per interface. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.12.1.1.3.1.8 |
| hm2PoeMgmtPortAutoShutdownTimeStart Start time for the automatic shutdown functionality per interface. | column | HM2-TC-MIBHmTimeHHMM24 | .1.3.6.1.4.1.248.11.12.1.1.3.1.9 |