hm2PoeMgmtPortDetectionStatus

HM2-POE-MIB · .1.3.6.1.4.1.248.11.12.1.1.3.1.3
MIB view Table view

Object

column Enumeration 
Describes the operational status of the port PD detection.
A value of disabled(1)- indicates that the PSE State diagram
is in the state DISABLED.
A value of deliveringPower(3) - indicates that the PSE State
diagram is in the state POWER_ON.
A value of fault(4) - indicates that the PSE State diagram is
in the state TEST_ERROR.
A value of test(5) - indicates that the PSE State diagram is
in the state TEST_MODE.
A value of otherFault(6) - indicates that the PSE State
diagram is in the state IDLE due to the variable
error_conditions.
A value of searching(2)- indicates the PSE State diagram is
in a state other than those listed above.

Context

MIB
HM2-POE-MIB
OID
.1.3.6.1.4.1.248.11.12.1.1.3.1.3
Type
column
Access
readonly
Status
current
Parent
hm2PoeMgmtPortEntry
Table
hm2PoeMgmtPortTable
Siblings
14

Syntax

Enumeration

Values & Constraints

Enumerated Values
1disabled
2searching
3deliveringPower
4fault
5test
6otherFault

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2PoeMgmtPortAdminEnable
enable (1) An interface which can provide the PSE functions. disable(2) The interface will act - as it would - if it had no PSE function.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.12.1.1.3.1.1
hm2PoeMgmtPortAutoShutdownTimeEnd
End time for the automatic shutdown functionality per interface.
columnHM2-TC-MIBHmTimeHHMM24.1.3.6.1.4.1.248.11.12.1.1.3.1.10
hm2PoeMgmtPortClassValid
Evaluates if class represented through pethPsePortPowerClassifications is valid or not. Class is valid if PD is delivered with power or in case of power exceeding through a connec…
columnEnumeration.1.3.6.1.4.1.248.11.12.1.1.3.1.11
hm2PoeMgmtPortFastStartup
Enables/disables Power over Ethernet fast startup mode on given port. The default value is 'disable'.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.12.1.1.3.1.12
hm2PoeMgmtPortMaxConsumptionPower
The maximum observed power consumption (hm2PoeMgmtPortMaxConsumptionPower) value expressed in milliwatts used by the PD. The value is reset to 0 if the PoE admin state is set to …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.12.1.1.3.1.13
hm2PoeMgmtPortPowerLimit
The power limit per port expressed in milliwatts. If set to zero the power consumption limitation is disabled.
columnInteger32.1.3.6.1.4.1.248.11.12.1.1.3.1.14
hm2PoeMgmtPortConsumptionCurrent
Measured current consumption per interface expressed in milliamperes (mA).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.12.1.1.3.1.15
hm2PoeMgmtPortConsumptionPower
Measured usage power per interface expressed in Milliwatts.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.248.11.12.1.1.3.1.2
hm2PoeMgmtPortPowerPriority
This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechani…
columnEnumeration.1.3.6.1.4.1.248.11.12.1.1.3.1.4
hm2PoeMgmtPortPowerClassification
Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others…
columnEnumeration.1.3.6.1.4.1.248.11.12.1.1.3.1.5
hm2PoeMgmtPortName
A manager will set the value of this variable to indicate the type of powered device that is connected to the port. The default value supplied by the agent if no value has ever be…
columnOctetString.1.3.6.1.4.1.248.11.12.1.1.3.1.6
hm2PoeMgmtPortAllowedClassBits
Bit mask which defines allowed classes per interface.
columnBits.1.3.6.1.4.1.248.11.12.1.1.3.1.7
hm2PoeMgmtPortAutoShutdown
Enables/disables automatic shutdown functionality per interface.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.12.1.1.3.1.8
hm2PoeMgmtPortAutoShutdownTimeStart
Start time for the automatic shutdown functionality per interface.
columnHM2-TC-MIBHmTimeHHMM24.1.3.6.1.4.1.248.11.12.1.1.3.1.9