hdsl2ShdslSpanConfMinLineRate
HDSL2-SHDSL-LINE-MIB ·
.1.3.6.1.2.1.10.48.1.10.1.3
Object
column
r/w
bps Unsigned32
This object configures the minimum transmission rate for the associated SHDSL Line in bits-per-second (bps) and includes both payload (user data) and any applicable framing overhead. If the minimum line rate equals the maximum line rate (hdsl2ShdslSpanMaxLineRate), the line rate is considered 'fixed'. If the minimum line rate is less than the maximum line rate, the line rate is considered 'rate-adaptive'.
Context
- MIB
- HDSL2-SHDSL-LINE-MIB
- OID
.1.3.6.1.2.1.10.48.1.10.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Units
- bps
- Parent
- hdsl2ShdslSpanConfProfileEntry
- Table
- hdsl2ShdslSpanConfProfileTable
- Siblings
- 15
Syntax
bps Unsigned32
Values & Constraints
Object Constraints
range: 0-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hdsl2ShdslSpanConfProfileName This object is the unique index associated with this profile.
Entries in this table are referenced via the object
hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanConfEntry. | column | OctetString | .1.3.6.1.2.1.10.48.1.10.1.1 |
| hdsl2ShdslSpanConfWorstCaseTargetMarginDown This object specifies the downstream worst-case target SNR
margin for an SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR
marg… | column | dB Integer32 | .1.3.6.1.2.1.10.48.1.10.1.10 |
| hdsl2ShdslSpanConfCurrCondTargetMarginUp This object specifies the upstream current-condition target
SNR margin for an SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR… | column | dB Integer32 | .1.3.6.1.2.1.10.48.1.10.1.11 |
| hdsl2ShdslSpanConfWorstCaseTargetMarginUp This object specifies the upstream worst-case target SNR
margin for an SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin… | column | dB Integer32 | .1.3.6.1.2.1.10.48.1.10.1.12 |
| hdsl2ShdslSpanConfUsedTargetMargins Indicates whether a target SNR margin is enabled or
disabled. This is a bit-map of possible settings. The
various bit positions are as follows:
currCondDown - c… | column | Bits | .1.3.6.1.2.1.10.48.1.10.1.13 |
| hdsl2ShdslSpanConfReferenceClock This object configures the clock reference for the STU-C
in an SHDSL Line. | column | Hdsl2ShdslClockReferenceType | .1.3.6.1.2.1.10.48.1.10.1.14 |
| hdsl2ShdslSpanConfLineProbeEnable This object enables/disables support for Line Probe of
the units in an SHDSL line. When Line Probe is enabled, the
system performs Line Probing to find the best possible
rate. I… | column | Enumeration | .1.3.6.1.2.1.10.48.1.10.1.15 |
| hdsl2ShdslSpanConfProfileRowStatus This object controls creation/deletion of the associated
entry in this table per the semantics of RowStatus. If an
active entry is referenced in hdsl2ShdslSpanConfProfile, the
en… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.48.1.10.1.16 |
| hdsl2ShdslSpanConfWireInterface This object configures the two-wire or optional four-wire,
six-wire, or eight-wire operation for SHDSL lines. | column | Enumeration | .1.3.6.1.2.1.10.48.1.10.1.2 |
| hdsl2ShdslSpanConfMaxLineRate This object configures the maximum transmission rate for
the associated SHDSL Line in bits-per-second (bps) and includes
both payload (user data) and any applicable framing overhe… | column | bps Unsigned32 | .1.3.6.1.2.1.10.48.1.10.1.4 |
| hdsl2ShdslSpanConfPSD This object configures use of symmetric/asymmetric PSD (Power
Spectral Density) Mask for the associated SHDSL Line. Support
for symmetric PSD is mandatory for all supported data … | column | Enumeration | .1.3.6.1.2.1.10.48.1.10.1.5 |
| hdsl2ShdslSpanConfTransmissionMode This object specifies the regional setting for the SHDSL
line. | column | Hdsl2ShdslTransmissionModeType | .1.3.6.1.2.1.10.48.1.10.1.6 |
| hdsl2ShdslSpanConfRemoteEnabled This object enables/disables support for remote management
of the units in an SHDSL line from the STU-R via the EOC. | column | Enumeration | .1.3.6.1.2.1.10.48.1.10.1.7 |
| hdsl2ShdslSpanConfPowerFeeding This object enables/disables support for optional power
feeding in an SHDSL line. | column | Enumeration | .1.3.6.1.2.1.10.48.1.10.1.8 |
| hdsl2ShdslSpanConfCurrCondTargetMarginDown This object specifies the downstream current condition target
SNR margin for an SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target S… | column | dB Integer32 | .1.3.6.1.2.1.10.48.1.10.1.9 |