hdsl2ShdslEndpointCurrStatus
HDSL2-SHDSL-LINE-MIB ·
.1.3.6.1.2.1.10.48.1.5.1.3
Object
column
Bits
Contains the current state of the endpoint. This is a
bit-map of possible conditions. The various bit positions
are as follows:
noDefect There are no defects on the line.
powerBackoff Indicates enhanced Power Backoff.
deviceFault Indicates that a vendor-dependent
diagnostic or self-test fault
has been detected.
dcContinuityFault Indicates vendor-dependent
conditions that interfere with
span powering such as short and
open circuits.
snrMarginAlarm Indicates that the SNR margin
has dropped below the alarm threshold.
loopAttenuationAlarm Indicates that the loop attenuation
exceeds the alarm threshold.
loswFailureAlarm Indicates a forward LOSW alarm.
configInitFailure Endpoint failure during initialization
due to paired endpoint not able to
support requested configuration.
protocolInitFailure Endpoint failure during initialization
due to incompatible protocol used by
the paired endpoint.
noNeighborPresent Endpoint failure during initialization
due to no activation sequence detected
from paired endpoint.
loopbackActive A loopback is currently active at this
segment endpoint.
This is intended to supplement ifOperStatus. Note that there
is a 1:1 relationship between the status bits defined in this
object and the notification thresholds defined elsewhere in
this MIB module.
Context
- MIB
- HDSL2-SHDSL-LINE-MIB
- OID
.1.3.6.1.2.1.10.48.1.5.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hdsl2ShdslEndpointCurrEntry
- Table
- hdsl2ShdslEndpointCurrTable
- Siblings
- 21
Syntax
Bits
Values & Constraints
Enumerated Values
0 | noDefect |
1 | powerBackoff |
2 | deviceFault |
3 | dcContinuityFault |
4 | snrMarginAlarm |
5 | loopAttenuationAlarm |
6 | loswFailureAlarm |
7 | configInitFailure |
8 | protocolInitFailure |
9 | noNeighborPresent |
10 | loopbackActive |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hdsl2ShdslEndpointCurrAtn The current loop attenuation for this endpoint as reported in
a Network or Customer Side Performance Status message. | column | dB Integer32 | .1.3.6.1.2.1.10.48.1.5.1.1 |
| hdsl2ShdslEndpointCurr15MinES Count of Errored Seconds (ES) in the current 15-minute
interval. | column | seconds PerfHist-TC-MIBPerfCurrentCount | .1.3.6.1.2.1.10.48.1.5.1.10 |
| hdsl2ShdslEndpointCurr15MinSES Count of Severely Errored Seconds (SES) in the current
15-minute interval. | column | seconds PerfHist-TC-MIBPerfCurrentCount | .1.3.6.1.2.1.10.48.1.5.1.11 |
| hdsl2ShdslEndpointCurr15MinCRCanomalies Count of CRC anomalies in the current 15-minute interval. | column | detected CRC Anomalies PerfHist-TC-MIBPerfCurrentCount | .1.3.6.1.2.1.10.48.1.5.1.12 |
| hdsl2ShdslEndpointCurr15MinLOSWS Count of Loss of Sync Word (LOSW) Seconds in the current
15-minute interval. | column | seconds PerfHist-TC-MIBPerfCurrentCount | .1.3.6.1.2.1.10.48.1.5.1.13 |
| hdsl2ShdslEndpointCurr15MinUAS Count of Unavailable Seconds (UAS) in the current 15-minute
interval. | column | seconds PerfHist-TC-MIBPerfCurrentCount | .1.3.6.1.2.1.10.48.1.5.1.14 |
| hdsl2ShdslEndpointCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of
the current 1-day interval. | column | seconds Hdsl2ShdslPerfTimeElapsed | .1.3.6.1.2.1.10.48.1.5.1.15 |
| hdsl2ShdslEndpointCurr1DayES Count of Errored Seconds (ES) during the current day as
measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. | column | seconds Hdsl2ShdslPerfCurrDayCount | .1.3.6.1.2.1.10.48.1.5.1.16 |
| hdsl2ShdslEndpointCurr1DaySES Count of Severely Errored Seconds (SES) during the current
day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. | column | seconds Hdsl2ShdslPerfCurrDayCount | .1.3.6.1.2.1.10.48.1.5.1.17 |
| hdsl2ShdslEndpointCurr1DayCRCanomalies Count of CRC anomalies during the current day as measured
by hdsl2ShdslEndpointCurr1DayTimeElapsed. | column | detected CRC Anomalies Hdsl2ShdslPerfCurrDayCount | .1.3.6.1.2.1.10.48.1.5.1.18 |
| hdsl2ShdslEndpointCurr1DayLOSWS Count of Loss of Sync Word (LOSW) Seconds during the current
day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. | column | seconds Hdsl2ShdslPerfCurrDayCount | .1.3.6.1.2.1.10.48.1.5.1.19 |
| hdsl2ShdslEndpointCurrSnrMgn The current SNR margin for this endpoint as reported in a
Status Response/SNR message. | column | dB Integer32 | .1.3.6.1.2.1.10.48.1.5.1.2 |
| hdsl2ShdslEndpointCurr1DayUAS Count of Unavailable Seconds (UAS) during the current day as
measured by hdsl2ShdslEndpointCurr1DayTimeElapsed. | column | seconds Hdsl2ShdslPerfCurrDayCount | .1.3.6.1.2.1.10.48.1.5.1.20 |
| hdsl2ShdslEndpointCurrTipRingReversal This object indicates the state of the tip/ring for the
wire pair. | column | Enumeration | .1.3.6.1.2.1.10.48.1.5.1.21 |
| hdsl2ShdslEndpointCurrActivationState This object indicates the activation or training state of
the wire pair. | column | Enumeration | .1.3.6.1.2.1.10.48.1.5.1.22 |
| hdsl2ShdslEndpointES Count of Errored Seconds (ES) on this endpoint since the xU
was last restarted. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.48.1.5.1.4 |
| hdsl2ShdslEndpointSES Count of Severely Errored Seconds (SES) on this endpoint
since the xU was last restarted. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.48.1.5.1.5 |
| hdsl2ShdslEndpointCRCanomalies Count of CRC anomalies on this endpoint since the xU was
last restarted. | column | detected CRC Anomalies SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.48.1.5.1.6 |
| hdsl2ShdslEndpointLOSWS Count of Loss of Sync Word (LOSW) Seconds on this endpoint
since the xU was last restarted. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.48.1.5.1.7 |
| hdsl2ShdslEndpointUAS Count of Unavailable Seconds (UAS) on this endpoint since
the xU was last restarted. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.48.1.5.1.8 |
| hdsl2ShdslEndpointCurr15MinTimeElapsed Total elapsed seconds in the current 15-minute interval. | column | seconds Hdsl2ShdslPerfTimeElapsed | .1.3.6.1.2.1.10.48.1.5.1.9 |