G6-SFP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
31
configTable
table.1.3.6.1.4.1.3181.10.6.1.34.1
·
1 row entry
·
4 columns
These setting apply to each SFP in the system.
Indexes
configIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
configIndex
Automatically generated
|
Integer32 Constraints: range: 0-0 |
.1.3.6.1.4.1.3181.10.6.1.34.1.1.1 |
||||
|
configLossOfSignalEvent
When enabled a loss of optical signal or the return of the signal will create an event.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.34.1.1.2 |
||||
|
configOpticalDeltaDetect
An optical receive power level change of more than delta_threshold between two successive read cycles generates an event.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.34.1.1.3 |
||||
|
configDeltaThreshold
Defines the dB difference required to trigger an event. Only 1 dB steps are permitted. A value of 0 detects any change. This setting is only for testing. Recommended value: 2.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.3181.10.6.1.34.1.1.4 |
informationTable
table.1.3.6.1.4.1.3181.10.6.1.34.100
·
1 row entry
·
27 columns
This table displays data which are read from the inserted SFPs.
Indexes
informationPortIndex
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
informationPortIndex
Automatically generated
|
Integer32 Constraints: range: 0-47 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.1 |
||||||||||||||||||||||
|
informationPort
Indicates the physical port in which this SFP is inserted.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.2 |
||||||||||||||||||||||
|
informationLocation
Textual description of SFP location.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.3 |
||||||||||||||||||||||
|
informationStatus
Should indicate OK. LOSS_OF_SIGNAL is shown when the optical receive power level is below the critical lower limit.
|
Bits Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.34.100.1.4 |
||||||||||||||||||||||
|
informationType
This parameter shows which type of optics are installed
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.34.100.1.5 |
||||||||||||||||||||||
|
informationConnector
Shows which connector is used with this SFP.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.34.100.1.6 |
||||||||||||||||||||||
|
informationWavelength
Nominal wavelength if this SFP. May also indicate ITU channel for DWDM optics.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.7 |
||||||||||||||||||||||
|
informationTxTechnology
Distinguishes between multimode and single mode SFP. For DWDM SFP more details including grid are shown.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.8 |
||||||||||||||||||||||
|
informationRxTechnology
Distinguishes between normal PIN receivers and more sensitive APD receivers.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.9 |
||||||||||||||||||||||
|
informationNominalBitrate
Nominal bitrate rounded to nearest 100Mbit. Usually the SFP can be operated at lower speed as well.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.10 |
||||||||||||||||||||||
|
informationManufacturer
Shows the manufacturer of this SFP.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.11 |
||||||||||||||||||||||
|
informationPartNumber
Shows the part number of this SFP. This will differ from the MICROSENS order code unless also MICROSENS is indicated as manufacturer.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.12 |
||||||||||||||||||||||
|
informationRevision
Internal revision code of this SFP.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.13 |
||||||||||||||||||||||
|
informationSerialNumber
Serial number of the SFP.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.14 |
||||||||||||||||||||||
|
informationMfgDateCode
Manufacturing date code.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.15 |
||||||||||||||||||||||
| informationWarnings | Bits Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.34.100.1.16 |
||||||||||||||||||||||
| informationAlarms | Bits Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.1.34.100.1.17 |
||||||||||||||||||||||
|
informationTxPower
Indicates the optical output in dBm. Some SFP cannot display this value. For electrical SFP N/A (not applicable) is shown.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.18 |
||||||||||||||||||||||
|
informationRxPower
Indicates the optical input in dBm. Some SFP cannot display this value. For electrical SFP N/A (not applicable) is shown.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.19 |
||||||||||||||||||||||
|
informationTemperature
Displays the temperature inside the SFP. This is usually higher than the system temperature.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.20 |
||||||||||||||||||||||
|
informationMaxLength9Um
Displays nominal maximum reach of this SFP on a standard single mode fiber.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.21 |
||||||||||||||||||||||
|
informationMaxLength50Um
Displays nominal maximum reach of this SFP on a 50 micro meter multimode fiber.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.22 |
||||||||||||||||||||||
|
informationMaxLength62Um
Displays nominal maximum reach of this SFP on a 62.5 micro meter multimode fiber.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.23 |
||||||||||||||||||||||
|
informationMaxLengthCopper
Displays nominal maximum reach of this SFP on a copper cable. Only applies to electrical SFP.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.24 |
||||||||||||||||||||||
|
informationTuningRange
For wavelength tunable optics additional details are shown here.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.25 |
||||||||||||||||||||||
|
informationPowerConsumption
Typcial power consumption values are shown if available from the interface.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.26 |
||||||||||||||||||||||
|
informationAdditionalInformation
Some special SFP can supply additional measurement data. For example OTDR reflection data can be listed here.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.1.34.100.1.27 |