informationNominalBitrate

G6-SFP-MIB · .1.3.6.1.4.1.3181.10.6.1.34.100.1.10
MIB view Table view

Object

column SNMPv2-TCDisplayString 
Nominal bitrate rounded to nearest 100Mbit. Usually the SFP can be operated at lower speed as well.

Context

MIB
G6-SFP-MIB
OID
.1.3.6.1.4.1.3181.10.6.1.34.100.1.10
Type
column
Access
readonly
Status
current
Parent
informationEntry
Table
informationTable
Siblings
26

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
informationPortIndex
Automatically generated
columnInteger32.1.3.6.1.4.1.3181.10.6.1.34.100.1.1
informationManufacturer
Shows the manufacturer of this SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.11
informationPartNumber
Shows the part number of this SFP. This will differ from the MICROSENS order code unless also MICROSENS is indicated as manufacturer.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.12
informationRevision
Internal revision code of this SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.13
informationSerialNumber
Serial number of the SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.14
informationMfgDateCode
Manufacturing date code.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.15
informationWarningscolumnBits.1.3.6.1.4.1.3181.10.6.1.34.100.1.16
informationAlarmscolumnBits.1.3.6.1.4.1.3181.10.6.1.34.100.1.17
informationTxPower
Indicates the optical output in dBm. Some SFP cannot display this value. For electrical SFP N/A (not applicable) is shown.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.18
informationRxPower
Indicates the optical input in dBm. Some SFP cannot display this value. For electrical SFP N/A (not applicable) is shown.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.19
informationPort
Indicates the physical port in which this SFP is inserted.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3181.10.6.1.34.100.1.2
informationTemperature
Displays the temperature inside the SFP. This is usually higher than the system temperature.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.20
informationMaxLength9Um
Displays nominal maximum reach of this SFP on a standard single mode fiber.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.21
informationMaxLength50Um
Displays nominal maximum reach of this SFP on a 50 micro meter multimode fiber.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.22
informationMaxLength62Um
Displays nominal maximum reach of this SFP on a 62.5 micro meter multimode fiber.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.23
informationMaxLengthCopper
Displays nominal maximum reach of this SFP on a copper cable. Only applies to electrical SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.24
informationTuningRange
For wavelength tunable optics additional details are shown here.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.25
informationPowerConsumption
Typcial power consumption values are shown if available from the interface.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.26
informationAdditionalInformation
Some special SFP can supply additional measurement data. For example OTDR reflection data can be listed here.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.27
informationLocation
Textual description of SFP location.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.3
informationStatus
Should indicate OK. LOSS_OF_SIGNAL is shown when the optical receive power level is below the critical lower limit.
columnBits.1.3.6.1.4.1.3181.10.6.1.34.100.1.4
informationType
This parameter shows which type of optics are installed
columnEnumeration.1.3.6.1.4.1.3181.10.6.1.34.100.1.5
informationConnector
Shows which connector is used with this SFP.
columnEnumeration.1.3.6.1.4.1.3181.10.6.1.34.100.1.6
informationWavelength
Nominal wavelength if this SFP. May also indicate ITU channel for DWDM optics.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.7
informationTxTechnology
Distinguishes between multimode and single mode SFP. For DWDM SFP more details including grid are shown.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.8
informationRxTechnology
Distinguishes between normal PIN receivers and more sensitive APD receivers.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3181.10.6.1.34.100.1.9