informationWarnings
G6-SFP-MIB ·
.1.3.6.1.4.1.3181.10.6.1.34.100.1.16
Object
column
Bits
No description available.
Context
- MIB
- G6-SFP-MIB
- OID
.1.3.6.1.4.1.3181.10.6.1.34.100.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- informationEntry
- Table
- informationTable
- Siblings
- 26
Syntax
Bits
Values & Constraints
Enumerated Values
0 | txPowerLow |
1 | txPowerHigh |
2 | txBiasLow |
3 | txBiasHigh |
4 | vccLow |
5 | vccHigh |
6 | tempLow |
7 | tempHigh |
8 | rxPowerLow |
9 | rxPowerHigh |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| informationPortIndex Automatically generated | column | Integer32 | .1.3.6.1.4.1.3181.10.6.1.34.100.1.1 |
| informationNominalBitrate Nominal bitrate rounded to nearest 100Mbit. Usually the SFP can be operated at lower speed as well. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.10 |
| informationManufacturer Shows the manufacturer of this SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.11 |
| informationPartNumber Shows the part number of this SFP. This will differ from the MICROSENS order code unless also MICROSENS is indicated as manufacturer. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.12 |
| informationRevision Internal revision code of this SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.13 |
| informationSerialNumber Serial number of the SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.14 |
| informationMfgDateCode Manufacturing date code. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.15 |
| informationAlarms | column | Bits | .1.3.6.1.4.1.3181.10.6.1.34.100.1.17 |
| informationTxPower Indicates the optical output in dBm. Some SFP cannot display this value. For electrical SFP N/A (not applicable) is shown. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.18 |
| informationRxPower Indicates the optical input in dBm. Some SFP cannot display this value. For electrical SFP N/A (not applicable) is shown. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.19 |
| informationPort Indicates the physical port in which this SFP is inserted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3181.10.6.1.34.100.1.2 |
| informationTemperature Displays the temperature inside the SFP. This is usually higher than the system temperature. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.20 |
| informationMaxLength9Um Displays nominal maximum reach of this SFP on a standard single mode fiber. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.21 |
| informationMaxLength50Um Displays nominal maximum reach of this SFP on a 50 micro meter multimode fiber. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.22 |
| informationMaxLength62Um Displays nominal maximum reach of this SFP on a 62.5 micro meter multimode fiber. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.23 |
| informationMaxLengthCopper Displays nominal maximum reach of this SFP on a copper cable. Only applies to electrical SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.24 |
| informationTuningRange For wavelength tunable optics additional details are shown here. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.25 |
| informationPowerConsumption Typcial power consumption values are shown if available from the interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.26 |
| informationAdditionalInformation Some special SFP can supply additional measurement data. For example OTDR reflection data can be listed here. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.27 |
| informationLocation Textual description of SFP location. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.3 |
| informationStatus Should indicate OK. LOSS_OF_SIGNAL is shown when the optical receive power level is below the critical lower limit. | column | Bits | .1.3.6.1.4.1.3181.10.6.1.34.100.1.4 |
| informationType This parameter shows which type of optics are installed | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.34.100.1.5 |
| informationConnector Shows which connector is used with this SFP. | column | Enumeration | .1.3.6.1.4.1.3181.10.6.1.34.100.1.6 |
| informationWavelength Nominal wavelength if this SFP. May also indicate ITU channel for DWDM optics. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.7 |
| informationTxTechnology Distinguishes between multimode and single mode SFP. For DWDM SFP more details including grid are shown. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.8 |
| informationRxTechnology Distinguishes between normal PIN receivers and more sensitive APD receivers. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3181.10.6.1.34.100.1.9 |