G6-IGMP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
44
configTable
table.1.3.6.1.4.1.3181.10.6.2.40.5
·
1 row entry
·
16 columns
This table defines IGMP snooping parameter per VLAN. The table entries are referenced by VLAN ID and must match corresponding VLAN filter entires defined under vlan.filter_config.vlan_id. Any number of table entires can be created to configure unique settings for different VLANs. The default entry for VLAN ID=0 cannot be deleted and it used when no VLAN are used in the system.
Indexes
configIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
configIndex
Automatically generated
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.3181.10.6.2.40.5.1.1 |
||||
|
configVlanId
Defines IGMP snooping table entry associated with this VLAN ID. This is the key value for the table.VLAN ID 0 is used to define the IGMP settings when VLANs are not used. Type '=:' to edit, use index '[*] = new_vlan:' t…
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.2.40.5.1.2 |
||||
|
configEnableIgmpSnooping
Enable IGMP (IPv4) snooping for this particular VLAN.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.2.40.5.1.3 |
||||
|
configEnableMldSnooping
Enable MLD (IPv6) snooping for this particular VLAN.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.2.40.5.1.4 |
||||
|
configSnoopingPorts
This parameter permits port selective IGMP/MLD snooping enabling. When empty all ports are enabled! Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0xf (ports 1-4)
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3181.10.6.2.40.5.1.5 |
||||
|
configStaticRouterPorts
When set corresponding ports will be marked as static router ports. Upon default no ports will be marked. Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0x30 (ports 5-6)
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3181.10.6.2.40.5.1.6 |
||||
|
configMulticastRouterDetection
Defines the mode for detecting the router port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.2.40.5.1.7 |
||||
|
configEnableReportAggregation
When enabled limits the number of reports received from same subnet to be transmitted only once to the router.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.2.40.5.1.8 |
||||
|
configEnableFloodingUnregisterPkt
When enabled unregistered multicast streams are flooded on all ports (which are member of the source VLAN of this stream). When disabled unregistered multicast streams are forwarded on static router ports only.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.2.40.5.1.9 |
||||
|
configMcastGroupLimit
Indicates the number of multicast groups in the table.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.3181.10.6.2.40.5.1.10 |
||||
|
configGroupMembershipInterval
IGMP group_membership_interval time in seconds.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.3181.10.6.2.40.5.1.11 |
||||
|
configMaxResponseTime
IGMP response time in seconds.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.3181.10.6.2.40.5.1.12 |
||||
|
configEnableFastLeave
Enables the software to remove the multicast group when it receives an IGMP leave report without first sending an IGMP query message to check if other users still require this group. This parameter is used for IGMPv2 ho…
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3181.10.6.2.40.5.1.13 |
||||
|
configLastMemberQueryTime
Sets the interval in seconds that the software waits after sending an IGMP query to verify that no hosts that want to receive a particular multicast group to remain on a network segment. If no hosts respond before the l…
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.3181.10.6.2.40.5.1.14 |
||||
|
configNeighborDeadInterval
IGMP neighbor dead interval in seconds in case of router_discovery mode.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.3181.10.6.2.40.5.1.15 |
||||
|
configRouterAgingTime
IGMP router aging time in seconds.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.3181.10.6.2.40.5.1.16 |
.1.3.6.1.4.1.3181.10.6.2.40.6
·
1 row entry
·
6 columns
This table may be used to enter the multicast addresses of other protocols beside IGMP, that need to be forwarded when IGMP snooping is enabled. This can be used instead of flood_unregistered_packets parameter and reduces the traffic in the network.
Indexes
staticMulticastGroupsIndex
| Column | Syntax | OID |
|---|---|---|
|
staticMulticastGroupsIndex
Automatically generated
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.3181.10.6.2.40.6.1.1 |
|
staticMulticastGroupsName
Unique name to reference this entry and to remember whose MAC address is entered.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.2.40.6.1.2 |
|
staticMulticastGroupsDescription
Enter any information required to remember what this rule is intended to do.
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3181.10.6.2.40.6.1.3 |
|
staticMulticastGroupsMulticastMac
MAC address entry.
|
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.3181.10.6.2.40.6.1.4 |
|
staticMulticastGroupsForwardingPortMask
Enter the ports to which this multicast should be forwarded. A value of 0 disables this entry. Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0xf (ports 1-4)
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3181.10.6.2.40.6.1.5 |
|
staticMulticastGroupsVlanId
VLAN on which the packets is entering.
|
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.3181.10.6.2.40.6.1.6 |
statusTable
table.1.3.6.1.4.1.3181.10.6.2.40.100
·
1 row entry
·
11 columns
This table contains operational counters of the IGMP snooping module.
Indexes
statusIndex
| Column | Syntax | OID |
|---|---|---|
|
statusIndex
Automatically generated
|
Integer32 Constraints: range: 0-0 |
.1.3.6.1.4.1.3181.10.6.2.40.100.1.1 |
|
statusIgmpRouterPorts
Displays the igmp router ports list
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3181.10.6.2.40.100.1.2 |
|
statusRxGeneralQueries
Displays the number of received general queries.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.100.1.3 |
|
statusRxGroupQueries
Displays the number of received group queries.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.100.1.4 |
|
statusRxReports
Displays the number of received report messages.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.100.1.5 |
|
statusRxLeaves
Displays the number of received leave messages.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.100.1.6 |
|
statusRxAdvertisements
Displays the number of received advertisements.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.100.1.7 |
|
statusRxTerminations
Displays the number of received terminations.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.100.1.8 |
|
statusRxUnsupported
Displays the number of received unsupported messages.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.100.1.9 |
|
statusRxErrors
Displays the number of received error packets.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.100.1.10 |
|
statusTxSolicitations
Displays the number of transmitted solicitation messges.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.100.1.11 |
mldStatusTable
table.1.3.6.1.4.1.3181.10.6.2.40.101
·
1 row entry
·
11 columns
This table contains operational counters of the MLD snooping module.
Indexes
mldStatusIndex
| Column | Syntax | OID |
|---|---|---|
|
mldStatusIndex
Automatically generated
|
Integer32 Constraints: range: 0-0 |
.1.3.6.1.4.1.3181.10.6.2.40.101.1.1 |
|
mldStatusMldRouterPorts
Displays the igmp router ports list
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3181.10.6.2.40.101.1.2 |
|
mldStatusRxGeneralQueries
Displays the number of received general queries.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.101.1.3 |
|
mldStatusRxGroupQueries
Displays the number of received group queries.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.101.1.4 |
|
mldStatusRxReports
Displays the number of received report messages.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.101.1.5 |
|
mldStatusRxLeaves
Displays the number of received leave messages.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.101.1.6 |
|
mldStatusRxAdvertisements
Displays the number of received advertisements.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.101.1.7 |
|
mldStatusRxTerminations
Displays the number of received terminations.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.101.1.8 |
|
mldStatusRxUnsupported
Displays the number of received unsupported messages.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.101.1.9 |
|
mldStatusRxErrors
Displays the number of received error packets.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.101.1.10 |
|
mldStatusTxSolicitations
Displays the number of transmitted solicitation messges.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3181.10.6.2.40.101.1.11 |