configEnableReportAggregation

G6-IGMP-MIB · .1.3.6.1.4.1.3181.10.6.2.40.5.1.8

MIB view Table view

Object

column r/w Enumeration

When enabled limits the number of reports received from same subnet to be transmitted only once to the router.

Context

MIB: G6-IGMP-MIB
OID: .1.3.6.1.4.1.3181.10.6.2.40.5.1.8
Type: column
Access: readwrite
Status: current
Parent: configEntry
Table: configTable
Siblings: 15

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	disabled
`1`	enabled

Related Objects

Sibling Objects

Object	Type	Syntax	OID
configIndex Automatically generated	column	Integer32	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.1`
configMcastGroupLimit Indicates the number of multicast groups in the table.	column	Integer32	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.10`
configGroupMembershipInterval IGMP group_membership_interval time in seconds.	column	Integer32	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.11`
configMaxResponseTime IGMP response time in seconds.	column	Integer32	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.12`
configEnableFastLeave Enables the software to remove the multicast group when it receives an IGMP leave report without first sending an IGMP query message to check if other users still require this gro…	column	Enumeration	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.13`
configLastMemberQueryTime Sets the interval in seconds that the software waits after sending an IGMP query to verify that no hosts that want to receive a particular multicast group to remain on a network s…	column	Integer32	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.14`
configNeighborDeadInterval IGMP neighbor dead interval in seconds in case of router_discovery mode.	column	Integer32	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.15`
configRouterAgingTime IGMP router aging time in seconds.	column	Integer32	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.16`
configVlanId Defines IGMP snooping table entry associated with this VLAN ID. This is the key value for the table.VLAN ID 0 is used to define the IGMP settings when VLANs are not used. Type '=:…	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.2`
configEnableIgmpSnooping Enable IGMP (IPv4) snooping for this particular VLAN.	column	Enumeration	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.3`
configEnableMldSnooping Enable MLD (IPv6) snooping for this particular VLAN.	column	Enumeration	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.4`
configSnoopingPorts This parameter permits port selective IGMP/MLD snooping enabling. When empty all ports are enabled! Syntax: slot/port, slot/port or use hex value for quick setup. Example: = 0xf (…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.5`
configStaticRouterPorts When set corresponding ports will be marked as static router ports. Upon default no ports will be marked. Syntax: slot/port, slot/port or use hex value for quick setup. Example: =…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.6`
configMulticastRouterDetection Defines the mode for detecting the router port.	column	Enumeration	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.7`
configEnableFloodingUnregisterPkt When enabled unregistered multicast streams are flooded on all ports (which are member of the source VLAN of this stream). When disabled unregistered multicast streams are forward…	column	Enumeration	`.1.3.6.1.4.1.3181.10.6.2.40.5.1.9`