FOUNDRY-SN-VSRP-MIB Table View

Vlan index.

The authentication type of this interface.

The simple text password is allowed if only if
the snVsrpIfAuthType type is simpleTextPasswd.

Vlan index.

One of the virtual router ID of this vsrp interface.

The ownership of this vsrp router interface
can be set to backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this vsrp router interface.

The higher the number the higher the priority is.
This parameter decides which backup router should becomes
the Active Router for the interface. A backup Router with
higher priority selected to becomes the Active Route…

The higher the number the higher the priority is.
after this object is configured, the snVsrpVirRtrCurrPriority
of this interface will be adjusted dynamically with this
track priority when the Track Port states first
c…

The higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN.

Time interval between advertisements (seconds).

Dead interval (seconds).

This mode controls whether a higher priority Backup router
preempts a lower priority Master. The mode with enabled(1)
allow preemption and disabled(0) prohibit preemption.

This object specifies the vsrp Router's interface state as:
init(0)...initialization state.
master(1)...master state.
backup(2)...backup state.

The numbers of IP Addresses of this virtual router of this
interface, this holds good for L3 vsrp.

This object specifies the vsrp Router's activate command as:
disabled(0)...deactivate this vsrp Router.
enabled(1)....activate this vsrp Router.

This object specifies the identity of the physical port and virtual ports
whose state is to be monitored. Each port index is
an ifIndex, if there are consecutive 4 or more ifIndex then
they will be encoded like below.…

Set Advertise this backup router to master

VSRP protection mechanism, an extra delay for a switch in
backup mode to upgrade itself to master mode

VSRP:TTL in the hello packet to regulate the distance that a hello packet
can travel. It prevents the flooding of VSRP hello packets in the network

Include all free ports of the VLAN into its control ports

Set VSRP to save current parameters value

Time interval between backup routers hello message advertisements (seconds).

This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an existing row
…

The received vsrp ARP Packet Drop Counts.

The received VSRP IP Packet Drop Counts.

The received vsrp Port mismatching Counts.

The received VSRP Number of IP Addresses mismatching Counts.

The received vsrp IP Address mismatching Counts.

The counts of the virtual router interface with hello interval mismatch counts.

The counts of the virtual router interface with Priority zero from the master.

The counts of the virtual router interface with higher Priority.

The counts of the virtual router interface transition to master state.

The counts of the virtual router interface transition to backup state.

Current Dead interval (in 100 milliseconds).

Set backup router hello interval

VSRP protection mechanism, an extra delay for a switch in
backup mode to upgrade itself to master mode

VSRP:TTL in the hello packet to regulate the distance that a hello packet
can travel. It prevents the flooding of VSRP hello packets in the network

Hello MAC address.

The master router's real/virtual (primary) IP address. This is
the IP address listed as the source in vsrp advertisement
last received by this virtual router.