snVsrpVirRtrEntry
FOUNDRY-SN-VSRP-MIB ·
.1.3.6.1.4.1.1991.1.1.3.21.3.1.1
Object
row
The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp.
Context
- MIB
- FOUNDRY-SN-VSRP-MIB
- OID
.1.3.6.1.4.1.1991.1.1.3.21.3.1.1- Type
- row
- Status
- current
- Parent
- snVsrpVirRtrTable
- Table
- snVsrpVirRtrTable
- Children
- 36
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snVsrpVirRtrVlanId Vlan index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.1 |
| snVsrpVirRtrState This object specifies the vsrp Router's interface state as:
init(0)...initialization state.
master(1)...master state.
backup(2)...backup state. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.10 |
| snVsrpVirRtrIpAddrMask The numbers of IP Addresses of this virtual router of this
interface, this holds good for L3 vsrp. | column | OctetString | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.11 |
| snVsrpVirRtrActivate This object specifies the vsrp Router's activate command as:
disabled(0)...deactivate this vsrp Router.
enabled(1)....activate this vsrp Router. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.12 |
| snVsrpVirRtrTrackPortList This object specifies the identity of the physical port and virtual ports
whose state is to be monitored. Each port index is
an ifIndex, if there are consecutive 4 or more ifInd… | column | OctetString | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.13 |
| snVsrpVirRtrAdvertiseBackup Set Advertise this backup router to master | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.14 |
| snVsrpVirRtrHoldDownInt VSRP protection mechanism, an extra delay for a switch in
backup mode to upgrade itself to master mode | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.15 |
| snVsrpVirRtrInitTtl VSRP:TTL in the hello packet to regulate the distance that a hello packet
can travel. It prevents the flooding of VSRP hello packets in the network | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.16 |
| snVsrpVirRtrIncPortList Include all free ports of the VLAN into its control ports | column | OctetString | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.17 |
| snVsrpVirRtrSave Set VSRP to save current parameters value | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.18 |
| snVsrpVirRtrBackupInt Time interval between backup routers hello message advertisements (seconds). | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.19 |
| snVsrpVirRtrId One of the virtual router ID of this vsrp interface. | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.2 |
| snVsrpVirRtrRowStatus This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new r… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.20 |
| snVsrpVirRtrRxArpPktDropCnts The received vsrp ARP Packet Drop Counts. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.21 |
| snVsrpVirRtrRxIpPktDropCnts The received VSRP IP Packet Drop Counts. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.22 |
| snVsrpVirRtrRxPortMismatchCnts The received vsrp Port mismatching Counts. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.23 |
| snVsrpVirRtrRxNumOfIpMismatchCnts The received VSRP Number of IP Addresses mismatching Counts. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.24 |
| snVsrpVirRtrRxIpMismatchCnts The received vsrp IP Address mismatching Counts. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.25 |
| snVsrpVirRtrRxHelloIntMismatchCnts The counts of the virtual router interface with hello interval mismatch counts. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.26 |
| snVsrpVirRtrRxPriorityZeroFromMasterCnts The counts of the virtual router interface with Priority zero from the master. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.27 |
| snVsrpVirRtrRxHigherPriorityCnts The counts of the virtual router interface with higher Priority. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.28 |
| snVsrpVirRtrTransToMasterStateCnts The counts of the virtual router interface transition to master state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.29 |
| snVsrpVirRtrOwnership The ownership of this vsrp router interface
can be set to backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this vsrp router interface. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.3 |
| snVsrpVirRtrTransToBackupStateCnts The counts of the virtual router interface transition to backup state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.30 |
| snVsrpVirRtrCurrDeadInt Current Dead interval (in 100 milliseconds). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.31 |
| snVsrpVirRtrCurHelloInt Set backup router hello interval | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.32 |
| snVsrpVirRtrCurHoldDownInt VSRP protection mechanism, an extra delay for a switch in
backup mode to upgrade itself to master mode | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.33 |
| snVsrpVirRtrCurInitTtl VSRP:TTL in the hello packet to regulate the distance that a hello packet
can travel. It prevents the flooding of VSRP hello packets in the network | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.34 |
| snVsrpVirRtrHelloMacAddress Hello MAC address. | column | MacAddress | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.35 |
| snVsrpVirRtrMasterIpAddr The master router's real/virtual (primary) IP address. This is
the IP address listed as the source in vsrp advertisement
last received by this virtual router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.36 |
| snVsrpVirRtrCfgPriority The higher the number the higher the priority is.
This parameter decides which backup router should becomes
the Active Router for the interface. A backup Router with
higher prior… | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.4 |
| snVsrpVirRtrTrackPriority The higher the number the higher the priority is.
after this object is configured, the snVsrpVirRtrCurrPriority
of this interface will be adjusted dynamically with this
track pri… | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.5 |
| snVsrpVirRtrCurrPriority The higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN. | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.6 |
| snVsrpVirRtrHelloInt Time interval between advertisements (seconds). | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.7 |
| snVsrpVirRtrDeadInt Dead interval (seconds). | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.8 |
| snVsrpVirRtrPreemptMode This mode controls whether a higher priority Backup router
preempts a lower priority Master. The mode with enabled(1)
allow preemption and disabled(0) prohibit preemption. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.9 |