snVsrpVirRtrCurrPriority

FOUNDRY-SN-VSRP-MIB · .1.3.6.1.4.1.1991.1.1.3.21.3.1.1.6
MIB view Table view

Object

column Integer32 
The higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN.

Context

MIB
FOUNDRY-SN-VSRP-MIB
OID
.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.6
Type
column
Access
readonly
Status
current
Parent
snVsrpVirRtrEntry
Table
snVsrpVirRtrTable
Siblings
35

Syntax

Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snVsrpVirRtrVlanId
Vlan index.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.1
snVsrpVirRtrState
This object specifies the vsrp Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.10
snVsrpVirRtrIpAddrMask
The numbers of IP Addresses of this virtual router of this interface, this holds good for L3 vsrp.
columnOctetString.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.11
snVsrpVirRtrActivate
This object specifies the vsrp Router's activate command as: disabled(0)...deactivate this vsrp Router. enabled(1)....activate this vsrp Router.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.12
snVsrpVirRtrTrackPortList
This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifInd…
columnOctetString.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.13
snVsrpVirRtrAdvertiseBackup
Set Advertise this backup router to master
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.14
snVsrpVirRtrHoldDownInt
VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode
columnInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.15
snVsrpVirRtrInitTtl
VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network
columnInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.16
snVsrpVirRtrIncPortList
Include all free ports of the VLAN into its control ports
columnOctetString.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.17
snVsrpVirRtrSave
Set VSRP to save current parameters value
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.18
snVsrpVirRtrBackupInt
Time interval between backup routers hello message advertisements (seconds).
columnInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.19
snVsrpVirRtrId
One of the virtual router ID of this vsrp interface.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.2
snVsrpVirRtrRowStatus
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new r…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.20
snVsrpVirRtrRxArpPktDropCnts
The received vsrp ARP Packet Drop Counts.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.21
snVsrpVirRtrRxIpPktDropCnts
The received VSRP IP Packet Drop Counts.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.22
snVsrpVirRtrRxPortMismatchCnts
The received vsrp Port mismatching Counts.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.23
snVsrpVirRtrRxNumOfIpMismatchCnts
The received VSRP Number of IP Addresses mismatching Counts.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.24
snVsrpVirRtrRxIpMismatchCnts
The received vsrp IP Address mismatching Counts.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.25
snVsrpVirRtrRxHelloIntMismatchCnts
The counts of the virtual router interface with hello interval mismatch counts.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.26
snVsrpVirRtrRxPriorityZeroFromMasterCnts
The counts of the virtual router interface with Priority zero from the master.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.27
snVsrpVirRtrRxHigherPriorityCnts
The counts of the virtual router interface with higher Priority.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.28
snVsrpVirRtrTransToMasterStateCnts
The counts of the virtual router interface transition to master state.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.29
snVsrpVirRtrOwnership
The ownership of this vsrp router interface can be set to backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this vsrp router interface.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.3
snVsrpVirRtrTransToBackupStateCnts
The counts of the virtual router interface transition to backup state.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.30
snVsrpVirRtrCurrDeadInt
Current Dead interval (in 100 milliseconds).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.31
snVsrpVirRtrCurHelloInt
Set backup router hello interval
columnInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.32
snVsrpVirRtrCurHoldDownInt
VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode
columnInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.33
snVsrpVirRtrCurInitTtl
VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network
columnInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.34
snVsrpVirRtrHelloMacAddress
Hello MAC address.
columnMacAddress.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.35
snVsrpVirRtrMasterIpAddr
The master router's real/virtual (primary) IP address. This is the IP address listed as the source in vsrp advertisement last received by this virtual router.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.36
snVsrpVirRtrCfgPriority
The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher prior…
columnInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.4
snVsrpVirRtrTrackPriority
The higher the number the higher the priority is. after this object is configured, the snVsrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track pri…
columnInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.5
snVsrpVirRtrHelloInt
Time interval between advertisements (seconds).
columnInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.7
snVsrpVirRtrDeadInt
Dead interval (seconds).
columnInteger32.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.8
snVsrpVirRtrPreemptMode
This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.21.3.1.1.9