FDRY-POE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
24

snAgentPoePortTable

table
.1.3.6.1.4.1.1991.1.1.2.14.2.2 · 1 row entry · 16 columns
Open in standard view 
A table of POE port information.
snAgentPoePortEntry entry .1.3.6.1.4.1.1991.1.1.2.14.2.2.1
A row in the POE port table.
Indexes
snAgentPoePortNumber
Column Syntax OID
snAgentPoePortNumber
The port number in ifIndex value.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.1
snAgentPoePortControl
Control inline power on/off to a port. If a port does not
have inline power capability, reading this object returns
'other(1)'.
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
4enableLegacyDevice
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.2
snAgentPoePortWattage
Adjust the inline power wattage. Valid value between 1000
to 15400(IEEE802_3AF)/30000(IEEE802_3AT)/120000(IEEE802_3BT). Each unit is milliwatts.
This object can only be set after snSwIfInLinePowerControl has been set to…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.3
snAgentPoePortClass
Adjust the inline power class. Valid value between 0 to 3(IEEE802_3AF)/4(IEEE802_3AT).
This object can only be set after snSwIfInLinePowerControl
has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If
a port does no…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.4
snAgentPoePortPriority
Inline power allocation priority for the power device
0- Not a POE port, 1- Critical, 2- High, 3- Low,
4- Medium, 5- other.
Enumerationr/w
Enumerated Values:
0invalid
1critical
2high
3low
4medium
5other
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.5
snAgentPoePortConsumed
Inline power consumed by the port. Each unit is milliwatts.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.6
snAgentPoePortType
Inline Power device type 802.3af, 802.3at, 802.3bt or Legacy device.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.7
snAgentPoePortPDClass
This is a PD signature which the decive learns in the process of
PD-classification. PD detection and PD-classification are two steps of powering PD.
And if PD is powered without user power Spec, then PoE port power li…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.8
snAgentPoePortPDClassB
This is second PD class signature of dual signature PD which the device learns in the process of
PD-classification. PD detection and PD-classification are two steps of powering PD.
And if PD is powered without user po…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.9
snAgentPoePortlldpReqPwr
Maximum power requested by PD through LLDP in milliwatts.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.10
snAgentPoePortlldpReqPwrA deprecated
Maximum power requested by PD through LLDP in milliwatts. In case of Dual Signature PD we have 2 channel
snAgentPoePortlldpReqPwrA is power in milliwatts for channel A.
This is deprecated as the required information is …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.11
snAgentPoePortlldpReqPwrB deprecated
Maximum power requested by PD through LLDP in milliwatts. In case of Dual Signature PD we have 2 channel
snAgentPoePortlldpReqPwrB is power in milliwatts for channel B.
This is deprecated as the required information is …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.12
snAgentPoePortCapability
Capability of port, 0-others, 1-2pair, 2-4pair.
Enumeration
Enumerated Values:
0others
1twoPairPse
2fourPairPse
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.13
snAgentPoePortMax2PairPwr
Maximum power supported by 2pair port in milliwatts.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.14
snAgentPoePortMax4PairPwr
Maximum power supported by 4pair port in milliwatts.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.15
snAgentPoePortMode
Poe port overdrive mode.
Enumeration
Enumerated Values:
0none
1overdrive
 .1.3.6.1.4.1.1991.1.1.2.14.2.2.1.16

snAgentPoeModuleTable

table
.1.3.6.1.4.1.1991.1.1.2.14.3.1 · 1 row entry · 3 columns
Open in standard view 
A table of POE Module configuration.
snAgentPoeModuleEntry entry .1.3.6.1.4.1.1991.1.1.2.14.3.1.1
A row in the POE Module table.
Indexes
snAgentPoeModuleNumber
Column Syntax OID
snAgentPoeModuleNumber
This objects talks about POE module number.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.2.14.3.1.1.1
snAgentPoeModuleBudget
This objects talks about module power budget in watts.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.2.14.3.1.1.2
snAgentPoeModuleMaxPDTypeSupport
This object talks about the POE module type which is capable to support Power Device (PD) type
ieee802.3af or ieee802.3at(also called POE plus)type. Module which support ieee802.3at can also
support ieee802.3af but rev…
Enumeration
Enumerated Values:
0ieee802dot3af
1ieee802dot3at
 .1.3.6.1.4.1.1991.1.1.2.14.3.1.1.3

snAgentPoeUnitTable

table
.1.3.6.1.4.1.1991.1.1.2.14.4.1 · 1 row entry · 5 columns
Open in standard view 
A table of POE informaion for each unit. Only the unit 
that has POE capability appears in a table row
snAgentPoeUnitEntry entry .1.3.6.1.4.1.1991.1.1.2.14.4.1.1
A row in the POE Unit table.
Indexes
snAgentPoeUnitIndex
Column Syntax OID
snAgentPoeUnitIndex
The Index to POE unit Table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.2.14.4.1.1.1
snAgentPoeUnitPowerCapacityTotal
This object shows the total inline power capacity available on that unit (device), measured in mWatts.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.2.14.4.1.1.2
snAgentPoeUnitPowerCapacityFree
This object shows the inline power capacity currently available on that unit (device) which is unallocated, measured in mWatts.
In case of Static allocation total free power and in case of Dynamic allocation total uncon…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.2.14.4.1.1.3
snAgentPoeUnitPowerAllocationsRequestsHonored
This object shows number of times the inline power allocations requests honored on that unit (device).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.2.14.4.1.1.4
snAgentPoePwrAllocationType
This object shows the power allocation type, based on which the total free capacity is displayed. Static(1) or Dynamic(2) power allocation.
Enumeration
Enumerated Values:
0none
1static
2dynamic
 .1.3.6.1.4.1.1991.1.1.2.14.4.1.1.5