FDRY-ACL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
23

fdryIpv6AclTable

table
.1.3.6.1.4.1.1991.1.2.16.1.1.1 · 1 row entry · 20 columns
Open in standard view 
Table of Ipv6 Access Control List filters
fdryIpv6AclEntry entry .1.3.6.1.4.1.1991.1.2.16.1.1.1.1
An entry in the Ipv6 Access Control List filter table.
Indexes
fdryIpv6AclIndex
Column Syntax OID
fdryIpv6AclIndex
The access control list item number for an entry.
This is a unique number that identifies different
Access list entries. This one has to be
unique even though the name is not unique
for a give access list with same or d…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.1
fdryIpv6AclName
Access Control List name for an entry.
This object is not writable on NI platforms.
OctetStringr/w
Constraints:
range: 0-199
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.2
fdryIpv6AclAction
Action to take if the ip packet matches
with this access control list.
Actionr/w
Textual Convention: Action Enumeration
Type Values:
0deny
1permit
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.3
fdryIpv6AclProtocol
Transport protocols. 0 means any protocol.
IpProtocolr/w
Textual Convention: IpProtocol Unsigned32
Type Constraints:
range: 0..256
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.4
fdryIpv6AclSourceIp
Source Ipv6 address.
IPV6-TCIpv6Addressr/w
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.5
fdryIpv6AclSourcePrefixLen
Source IPv6 address prefix length.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.6
fdryIpv6AclSourceOperator
Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number
Operatorr/w
Textual Convention: Operator Enumeration
Type Values:
0eq
1neq
2lt
3gt
4range
7undefined
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.7
fdryIpv6AclSourceOperand1
For now this only refers to transport
protocol port number.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.8
fdryIpv6AclSourceOperand2
For now this only refers to transport
protocol port number.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.9
fdryIpv6AclDestinationIp
Destination Ipv6 address.
IPV6-TCIpv6Addressr/w
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.10
fdryIpv6AclDestinationPrefixLen
Destination IPv6 address prefix length.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.11
fdryIpv6AclDestinationOperator
Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number
Operatorr/w
Textual Convention: Operator Enumeration
Type Values:
0eq
1neq
2lt
3gt
4range
7undefined
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.12
fdryIpv6AclDestinationOperand1
For now this only refers to transport
protocol port number.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.13
fdryIpv6AclDestinationOperand2
For now this only refers to transport
protocol port number.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.14
fdryIpv6AclEstablished
Enable/Disable the filtering of established TCP
packets of which the ACK or RESET flag is on. This
additional filter only applies to TCP transport
protocol.
RtrStatusr/w
Textual Convention: RtrStatus Enumeration
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.15
fdryIpv6AclLogOption
Log flag, should be set to one to enable logging
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.16
fdryIpv6AclComments
Remark description of individual Access Control List entry.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.17
fdryIpv6AclRowStatus
To create or delete a access list
entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.18
fdryIpv6AclVlanId
Optional VLAN ID to match against that of the incoming packet.
By default, the VLAN ID field is ignored during the match. In this case,
value 0 is returned.
FOUNDRY-SN-SWITCH-GROUP-MIBFdryVlanIdOrNoneTCr/w
Textual Convention: FOUNDRY-SN-SWITCH-GROUP-MIBFdryVlanIdOrNoneTC Integer32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.19
fdryIpv6AclClauseString
Returns the equivalent filter clause string.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.20

brcdIpv6AccessListTable

table
.1.3.6.1.4.1.1991.1.2.16.1.1.2 · 1 row entry · 3 columns
Open in standard view 
Table of Ipv6 Access Control List.  This table only supports
IPv6 ACLs with name length less than or equal to 110 characters
SNMP walk operation will skip the entries if the IPv6 ACL name is
greater than 110 characters.
brcdIpv6AccessListEntry entry .1.3.6.1.4.1.1991.1.2.16.1.1.2.1
An entry in the Ipv6 Access Control List table.
Indexes
brcdIpv6AccessListName
Column Syntax OID
brcdIpv6AccessListName
Name of the IPv6 Access Control List. From SNMP the length
of the IPv6 ACL name is restricted to 110 characters although
from CLI it can be 200 characters, due to SNMP restriction on
sub OID length to be 128 for Index…
OctetString
Constraints:
range: 1-110
 .1.3.6.1.4.1.1991.1.2.16.1.1.2.1.1
brcdIpv6AccessListNextIndex
When read provides the encoded Index - combination of IPv6 ACL id and
next available filter id - which can be used as index while creating
access list filter entry in the fdryIpv6AclTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.2.16.1.1.2.1.2
brcdIpv6AccessListRowStatus
To create or delete a Ipv6 access list entry. The supported values are
createAndGo(4) to create an entry in this table and destroy(6) to delete
an entry from this table. Value of active(1) will be always returned for…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1991.1.2.16.1.1.2.1.3