fdryIpv6AclName
FDRY-ACL-MIB ·
.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.2
Object
column
r/w
OctetString
Access Control List name for an entry. This object is not writable on NI platforms.
Context
- MIB
- FDRY-ACL-MIB
- OID
.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fdryIpv6AclEntry
- Table
- fdryIpv6AclTable
- Siblings
- 19
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-199
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fdryIpv6AclIndex The access control list item number for an entry.
This is a unique number that identifies different
Access list entries. This one has to be
unique even though the name is not uniq… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.1 |
| fdryIpv6AclDestinationIp Destination Ipv6 address. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.10 |
| fdryIpv6AclDestinationPrefixLen Destination IPv6 address prefix length. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.11 |
| fdryIpv6AclDestinationOperator Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number | column | Operator | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.12 |
| fdryIpv6AclDestinationOperand1 For now this only refers to transport
protocol port number. | column | Unsigned32 | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.13 |
| fdryIpv6AclDestinationOperand2 For now this only refers to transport
protocol port number. | column | Unsigned32 | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.14 |
| fdryIpv6AclEstablished Enable/Disable the filtering of established TCP
packets of which the ACK or RESET flag is on. This
additional filter only applies to TCP transport
protocol. | column | RtrStatus | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.15 |
| fdryIpv6AclLogOption Log flag, should be set to one to enable logging | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.16 |
| fdryIpv6AclComments Remark description of individual Access Control List entry. | column | OctetString | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.17 |
| fdryIpv6AclRowStatus To create or delete a access list
entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.18 |
| fdryIpv6AclVlanId Optional VLAN ID to match against that of the incoming packet.
By default, the VLAN ID field is ignored during the match. In this case,
value 0 is returned. | column | FOUNDRY-SN-SWITCH-GROUP-MIBFdryVlanIdOrNoneTC | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.19 |
| fdryIpv6AclClauseString Returns the equivalent filter clause string. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.20 |
| fdryIpv6AclAction Action to take if the ip packet matches
with this access control list. | column | Action | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.3 |
| fdryIpv6AclProtocol Transport protocols. 0 means any protocol. | column | IpProtocol | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.4 |
| fdryIpv6AclSourceIp Source Ipv6 address. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.5 |
| fdryIpv6AclSourcePrefixLen Source IPv6 address prefix length. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.6 |
| fdryIpv6AclSourceOperator Type of comparison to perform.
for now, this only applys to tcp or udp
to compare the port number | column | Operator | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.7 |
| fdryIpv6AclSourceOperand1 For now this only refers to transport
protocol port number. | column | Unsigned32 | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.8 |
| fdryIpv6AclSourceOperand2 For now this only refers to transport
protocol port number. | column | Unsigned32 | .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.9 |