fdryIpv6AclIndex

FDRY-ACL-MIB · .1.3.6.1.4.1.1991.1.2.16.1.1.1.1.1
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
The access control list item number for an entry.
This is a unique number that identifies different
Access list entries. This one has to be
unique even though the name is not unique
for a give access list with same or different source
address, prefix length, destination address and destination
prefix length, protocol type, action (permit/deny) type and the
operator (neq, eq, gt and , lt).

Context

MIB
FDRY-ACL-MIB
OID
.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.1
Type
column
Access
noaccess
Status
current
Parent
fdryIpv6AclEntry
Table
fdryIpv6AclTable
Siblings
19

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fdryIpv6AclDestinationIp
Destination Ipv6 address.
columnIPV6-TCIpv6Address.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.10
fdryIpv6AclDestinationPrefixLen
Destination IPv6 address prefix length.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.11
fdryIpv6AclDestinationOperator
Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number
columnOperator.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.12
fdryIpv6AclDestinationOperand1
For now this only refers to transport protocol port number.
columnUnsigned32.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.13
fdryIpv6AclDestinationOperand2
For now this only refers to transport protocol port number.
columnUnsigned32.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.14
fdryIpv6AclEstablished
Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This additional filter only applies to TCP transport protocol.
columnRtrStatus.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.15
fdryIpv6AclLogOption
Log flag, should be set to one to enable logging
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.16
fdryIpv6AclComments
Remark description of individual Access Control List entry.
columnOctetString.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.17
fdryIpv6AclRowStatus
To create or delete a access list entry.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.18
fdryIpv6AclVlanId
Optional VLAN ID to match against that of the incoming packet. By default, the VLAN ID field is ignored during the match. In this case, value 0 is returned.
columnFOUNDRY-SN-SWITCH-GROUP-MIBFdryVlanIdOrNoneTC.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.19
fdryIpv6AclName
Access Control List name for an entry. This object is not writable on NI platforms.
columnOctetString.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.2
fdryIpv6AclClauseString
Returns the equivalent filter clause string.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.20
fdryIpv6AclAction
Action to take if the ip packet matches with this access control list.
columnAction.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.3
fdryIpv6AclProtocol
Transport protocols. 0 means any protocol.
columnIpProtocol.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.4
fdryIpv6AclSourceIp
Source Ipv6 address.
columnIPV6-TCIpv6Address.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.5
fdryIpv6AclSourcePrefixLen
Source IPv6 address prefix length.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.6
fdryIpv6AclSourceOperator
Type of comparison to perform. for now, this only applys to tcp or udp to compare the port number
columnOperator.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.7
fdryIpv6AclSourceOperand1
For now this only refers to transport protocol port number.
columnUnsigned32.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.8
fdryIpv6AclSourceOperand2
For now this only refers to transport protocol port number.
columnUnsigned32.1.3.6.1.4.1.1991.1.2.16.1.1.1.1.9