F3-SYNC-MIB Table View

Unique index value associated with the Synchronization Entity.

This object represents the Administrative State of the Sync
Entity.

This object represents the Operational State of the Sync
Entity.

This object represents the Secondary State of the Sync
Entity.

This object represents the regional clock type for
the system. This object determines which QL codes are
supported.

This object provides the source of the currently selected
Sync reference. This would be the OID of the actual entity (bits port, traffic port etc.).
An OID value of {0 0} represents internal clock.

This object provides the system clock mode.

This object provides the QL of the system reference.
This is the value for each external reference’s Transmit
QL attribute unless it should be transmitting QL-DNU.

This object allows SNMP management entities to provide an
alias to the Sync entity.

This object represents the Sync entity's domain type. A Sync entity can be in
chassis (system) domain (applicable for HUB shelf and Aggregation shelf)
or line card domain (applicable for HUB shelf, Aggregation shelf a…

This object represents the Sync entity's selection mode.
If this mode is configured as ql-mode, the selection of
which reference should be used shall be based upon the
reference's Quality Level. The highest received
Qu…

This object allows configuration of the Sync entity's wait-to-restore
time (in minutes). A value of 0 disables WTR timers for all references.

This object allows configuration of the Object Identifier of the
Sync Reference Entity on which the f3SyncOperationType is performed.
A value of 0.0 denotes no sync reference is chosen for operation.

This object allows to perform the specified operation on the Sync Reference
specified by f3SyncOperationSyncRef.

Unique index value associated with the Sync Reference Entity.

This object represents the external sync reference to be
used as system clock reference source.

This object represents the priority of the external sync reference
to be used as system clock reference source. This value is
not mandatory when a single clock reference source is supported.
Lower priority value indic…

This object provides the sync reference status.

This object provides the sync reference state.

This object provides the sync reference received QL.

The type of storage configured for this entry.

The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.

The value…

This object allows SNMP management entities to provide an
alias to the Sync Reference entity.

This object provides the sync reference effective QL.

This object provides information on the current/active operation
on this sync reference.

Unique index value associated with the Time Clock Entity.

This object allows SNMP management entities to provide an
alias to the Time Clock entity.

This object represents the Administrative State of the Time Clock
Entity.

This object represents the Operational State of the Time Clock
Entity.

This object represents the Secondary State of the Time Clock
Entity.

This object provides the source of the currently selected
Time Clock reference. This would be the OID of the actual entity (GPS port, PPS port etc.).
An OID value of {0 0} represents internal clock.

This object provides the Time Clock mode.

!! Currently Only Priority Mode is supported !!
This object represents the Time Clock entity's selection mode.
If this mode is configured as ql-mode, the selection of
which reference should be used shall be based upon t…

This object allows configuration of the Time Clock entity's wait-to-restore
time (in minutes). A value of 0 disables WTR timers for all references.

This object allows configuration of the Object Identifier of the
TimeClock Reference Entity on which the f3TimeClockOperationType is performed.
A value of 0.0 denotes no Time Clock reference is chosen for operation.

This object allows to perform the specified operation on the Time Clock Reference
specified by f3TimeClockOperationTimeClockRef.

True if last minute of current UTC day contains 59 seconds, else false

True if last minute of current UTC day contains 61 seconds, else false

This object describe the trace ability status.

This object describe the expected quality level.

This object describe the current quality level.

This object describe whether it is sync reference candiddate.

This object describe the Holdover performance.

This object describe the UTC offset.

This object allows specification of the Time Clock Current
Time of Day.

This object provides the source of the currently selected frequency source for the Time Clock.
This would be the OID of the actual entity (GNSS Receiver port, Input Frquency Port, Sync object).
An OID value of {0.0} r…

This object provides the Frequency Clock mode determined according to the used f3TimeClockFrequencyReference.
In Case the f3TimeClockFrequencyReference is not selected (0.0), a 'notAvailable' value shall be used here

Unique index value associated with the Time Clock Reference Entity.

This object allows SNMP management entities to provide an
alias to the Time Clock Reference entity.

This object represents the external reference to be
used as system clock reference source.

This object represents the priority of the external reference
to be used as Time clock reference source. This value is
not mandatory when a single clock reference source is supported.
Lower priority value indicates hi…

This object provides the Time Clock reference status.

This object provides the Time Clock reference state.

This object provides information on the current/active operation
on this Time Clock reference.

The type of storage configured for this entry.

The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.

The value…