f3SyncSelectionMode

F3-SYNC-MIB · .1.3.6.1.4.1.2544.1.12.12.1.1.1.11
MIB view Table view

Object

column r/w SyncSelectionMode 
This object represents the Sync entity's selection mode.
If this mode is configured as ql-mode, the selection of
which reference should be used shall be based upon the
reference's Quality Level.  The highest received
Quality Level shall be the selected reference.  The priority
shall only be used to distinguish between references with the
same received QL.  When multiple references have the same QL
and same priority, the behavior of selection process within
the group is non-revertive.
If this mode is configued as priority-mode, the selection
of which reference should be used shall be based upon
the reference's priority (i.e. QL is disabled).  When
multiple references have the same priority, the behavior of
selection process within the group is non-revertive.

Context

MIB
F3-SYNC-MIB
OID
.1.3.6.1.4.1.2544.1.12.12.1.1.1.11
Type
column
Access
readwrite
Status
current
Parent
f3SyncEntry
Table
f3SyncTable
Siblings
13

Syntax

SyncSelectionMode
Source
SyncSelectionMode
Base type
Enumeration

Values & Constraints

Type Values
1ql-mode
2priority-mode

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
f3SyncIndex
Unique index value associated with the Synchronization Entity.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.12.1.1.1.1
f3SyncDomain
This object represents the Sync entity's domain type. A Sync entity can be in chassis (system) domain (applicable for HUB shelf and Aggregation shelf) or line card domain (appli…
columnSyncDomainType.1.3.6.1.4.1.2544.1.12.12.1.1.1.10
f3SyncWaitToRestoreTime
This object allows configuration of the Sync entity's wait-to-restore time (in minutes). A value of 0 disables WTR timers for all references.
columnInteger32.1.3.6.1.4.1.2544.1.12.12.1.1.1.12
f3SyncOperationSyncRef
This object allows configuration of the Object Identifier of the Sync Reference Entity on which the f3SyncOperationType is performed. A value of 0.0 denotes no sync reference is c…
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.12.1.1.1.13
f3SyncOperationType
This object allows to perform the specified operation on the Sync Reference specified by f3SyncOperationSyncRef.
columnSyncOperationType.1.3.6.1.4.1.2544.1.12.12.1.1.1.14
f3SyncAdminState
This object represents the Administrative State of the Sync Entity.
columnCM-COMMON-MIBAdminState.1.3.6.1.4.1.2544.1.12.12.1.1.1.2
f3SyncOperationalState
This object represents the Operational State of the Sync Entity.
columnCM-COMMON-MIBOperationalState.1.3.6.1.4.1.2544.1.12.12.1.1.1.3
f3SyncSecondaryState
This object represents the Secondary State of the Sync Entity.
columnCM-COMMON-MIBSecondaryState.1.3.6.1.4.1.2544.1.12.12.1.1.1.4
f3SyncNetworkClockType
This object represents the regional clock type for the system. This object determines which QL codes are supported.
columnNetworkClockType.1.3.6.1.4.1.2544.1.12.12.1.1.1.5
f3SyncSelectedReference
This object provides the source of the currently selected Sync reference. This would be the OID of the actual entity (bits port, traffic port etc.). An OID value of {0 0} represen…
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.12.1.1.1.6
f3SyncClockMode
This object provides the system clock mode.
columnClockMode.1.3.6.1.4.1.2544.1.12.12.1.1.1.7
f3SyncQL
This object provides the QL of the system reference. This is the value for each external reference’s Transmit QL attribute unless it should be transmitting QL-DNU.
columnSSMQualityLevel.1.3.6.1.4.1.2544.1.12.12.1.1.1.8
f3SyncAlias
This object allows SNMP management entities to provide an alias to the Sync entity.
columnOctetString.1.3.6.1.4.1.2544.1.12.12.1.1.1.9