f3SyncOperationType
F3-SYNC-MIB ·
.1.3.6.1.4.1.2544.1.12.12.1.1.1.14
Object
column
r/w
SyncOperationType
This object allows to perform the specified operation on the Sync Reference specified by f3SyncOperationSyncRef.
Context
- MIB
- F3-SYNC-MIB
- OID
.1.3.6.1.4.1.2544.1.12.12.1.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f3SyncEntry
- Table
- f3SyncTable
- Siblings
- 13
Syntax
SyncOperationType
- Source
- SyncOperationType
- Base type
Enumeration
Values & Constraints
Type Values
1 | none |
2 | forcedswitch |
3 | manualswitch |
4 | lockout |
5 | clearwtr |
6 | clearlockout |
7 | clearswitch |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f3SyncIndex Unique index value associated with the Synchronization Entity. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.12.1.1.1.1 |
| f3SyncDomain This object represents the Sync entity's domain type. A Sync entity can be in
chassis (system) domain (applicable for HUB shelf and Aggregation shelf)
or line card domain (appli… | column | SyncDomainType | .1.3.6.1.4.1.2544.1.12.12.1.1.1.10 |
| f3SyncSelectionMode This object represents the Sync entity's selection mode.
If this mode is configured as ql-mode, the selection of
which reference should be used shall be based upon the
reference's… | column | SyncSelectionMode | .1.3.6.1.4.1.2544.1.12.12.1.1.1.11 |
| f3SyncWaitToRestoreTime This object allows configuration of the Sync entity's wait-to-restore
time (in minutes). A value of 0 disables WTR timers for all references. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.12.1.1.1.12 |
| f3SyncOperationSyncRef This object allows configuration of the Object Identifier of the
Sync Reference Entity on which the f3SyncOperationType is performed.
A value of 0.0 denotes no sync reference is c… | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.12.1.1.1.13 |
| f3SyncAdminState This object represents the Administrative State of the Sync
Entity. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.12.1.1.1.2 |
| f3SyncOperationalState This object represents the Operational State of the Sync
Entity. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.12.1.1.1.3 |
| f3SyncSecondaryState This object represents the Secondary State of the Sync
Entity. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.12.1.1.1.4 |
| f3SyncNetworkClockType This object represents the regional clock type for
the system. This object determines which QL codes are
supported. | column | NetworkClockType | .1.3.6.1.4.1.2544.1.12.12.1.1.1.5 |
| f3SyncSelectedReference This object provides the source of the currently selected
Sync reference. This would be the OID of the actual entity (bits port, traffic port etc.).
An OID value of {0 0} represen… | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.12.1.1.1.6 |
| f3SyncClockMode This object provides the system clock mode. | column | ClockMode | .1.3.6.1.4.1.2544.1.12.12.1.1.1.7 |
| f3SyncQL This object provides the QL of the system reference.
This is the value for each external reference’s Transmit
QL attribute unless it should be transmitting QL-DNU. | column | SSMQualityLevel | .1.3.6.1.4.1.2544.1.12.12.1.1.1.8 |
| f3SyncAlias This object allows SNMP management entities to provide an
alias to the Sync entity. | column | OctetString | .1.3.6.1.4.1.2544.1.12.12.1.1.1.9 |