F3-CFM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
55

cfmMepTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.2 · 1 row entry · 23 columns
Open in standard view 
Additional MEP configuration such as Y.1731 configuration.
cfmMepEntry entry .1.3.6.1.4.1.2544.1.12.13.1.1.2.1
A list of additional MEP parameters such the Y.1731 parameters.
Indexes
No indexes recorded
Column Syntax OID
cfmMepAdminState
This object represents the Administrative State of the CFM MEPs.
CM-COMMON-MIBAdminStater/w
Textual Convention: CM-COMMON-MIBAdminState Enumeration
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.1
cfmMepAisGenTriggerTypes
A bit mask which indicates all the defects that result in triggering
an AIS for the higher level MEP or transmission of ETH-AIS.
CfmAisGenTriggerTypesr/w
Textual Convention: CfmAisGenTriggerTypes Bits
Type Values:
0bAisDefRemoteCCM
1bAisDefErrorCCM
2bAisDefXconCCM
3bAisDefAis
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.2
cfmMepAisClientMdLevel
AIS Client MD level which is the MD level used to identify any
higher level local MEPs for which AIS defect needs to be set or
MD level of the ETH-AIS frame generated if there are no local MEPs
at this MD level.
IEEE8021-CFM-MIBDot1agCfmMDLevelr/w
Textual Convention: IEEE8021-CFM-MIBDot1agCfmMDLevel Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.3
cfmMepAisInterval
ETH-AIS frame transmission interval if decision is made to transmit the
ETH-AIS frame.
CfmAisIntervalr/w
Textual Convention: CfmAisInterval Enumeration
Type Values:
1aisInterval1sec
2aisInterval1min
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.4
cfmMepAisGenEnabled
This flag enables/disables propagation of ETH-AIS to client MD levels.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.5
cfmMepAisPriority
This VLAN priority of the ETH-AIS frame.
CM-COMMON-MIBVlanPriorityr/w
Textual Convention: CM-COMMON-MIBVlanPriority Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.6
cfmMepLmTxCountAllPriosEnabled
This attribute is used when Y.1731 probes are created and LMM frames
are transmitted. As per Y.1731, loss measurement should be done per
priority class. The implementation is restricted to support counting
of frames for…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.7
cfmMepLmRxCountAllPriosEnabled
This attribute is used when Y.1731 probes are created and LMR frames
are transmitted. As per Y.1731, loss measurement should be done per
priority class. The implementation is restricted to support counting
of frames for…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.8
cfmMepLmDualEndedCountAllPriosEnabled
This attribute is used when Y.1731 probes are created and CCM frames
are transmitted with loss measurement counts. As per Y.1731, loss
measurement should be done per priority class. The implementation is
restricted to s…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.9
cfmMepLmCountInProfileEnabled
As per the Y.1731 data frames counted for loss measurement shall be
in-profile (green) data frames. As an added value, this flag is
provided for the device to count all frames instead of green frames
only. This flag cou…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.10
cfmMepLmTxPriority
This attribute is used if cfmMepLmTxCountAllPrios is false.
This attribute serves three purposes:
- It is the VLAN priority of the LMM.
- Data frames transmitted and received with this VLAN priority
are counted by the…
CM-COMMON-MIBVlanPriorityr/w
Textual Convention: CM-COMMON-MIBVlanPriority Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.11
cfmMepDmPriority
This attribute specifies the DMM frame VLAN priority.
CM-COMMON-MIBVlanPriorityr/w
Textual Convention: CM-COMMON-MIBVlanPriority Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.12
cfmMepRxCCMs
This provides the total number of received CCMs on the MEP.
CM-COMMON-MIBPerfCounter64
Textual Convention: CM-COMMON-MIBPerfCounter64 Unsigned64
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.13
cfmMepErrCCMs
This provides the total number of errored CCMs on the MEP.
CM-COMMON-MIBPerfCounter64
Textual Convention: CM-COMMON-MIBPerfCounter64 Unsigned64
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.14
cfmMepLLFTriggerTypes
This bit mask indicates the CFM triggers that result in link loss
forwarding.
CfmLLFTriggerTypesr/w
Textual Convention: CfmLLFTriggerTypes Bits
Type Values:
0bAis
1bCcmIfStatusTlv
2bRemoteCCM
3bRDI
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.15
cfmMepDefects
This bit mask indicates defects that not defined in standard 802.1ag
MIB such as AIS defect.
CfmMepDefects
Textual Convention: CfmMepDefects Bits
Type Values:
0bDefAIS
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.16
cfmMepTagEtherType
This object allows management of Ether Type for MEP VLAN Tag for the MEPs.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.17
cfmMepStatsAction
Allows the Manager to clear the CFM level
statistics : cfmMepRxCCMs, cfmMepErrCCMs.
CM-COMMON-MIBCmPmBinActionr/w
Textual Convention: CM-COMMON-MIBCmPmBinAction Enumeration
Type Values:
0not-applicable
1clear
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.18
cfmMepLbmInterval
ETH-LBM frame transmission interval.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.19
cfmMepOperationalState
This object represents the Operational State of the CFM MEP.
CM-COMMON-MIBOperationalState
Textual Convention: CM-COMMON-MIBOperationalState Enumeration
Type Values:
1normal
2outage
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.20
cfmMepSecondaryState
This object represents the Secondary State of the CFM MEP.
CM-COMMON-MIBSecondaryState
Textual Convention: CM-COMMON-MIBSecondaryState Bits
Type Values:
0not-applicable
1active
2automaticinservice
3facilityfailure
4fault
5loopback
6maintenance
7mismatchedeqpt
8standbyhot
9supportingentityoutage
10unassigned
11unequipped
12disabled
13forcedoffline
14initializing
15prtcl
16blckd
17mon-tx
18mir-rx
19cema
20lkdo
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.21
cfmMepSlmEnabled
This bit mask indicates the whether SLM is enabled per each COS.
CfmSlmEnabledTypesr/w
Textual Convention: CfmSlmEnabledTypes Bits
Type Values:
0cos0
1cos1
2cos2
3cos3
4cos4
5cos5
6cos6
7cos7
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.22
cfmMepAssociatedObject
This object represents the associated port, it could be port, flow or flow point.
SNMPv2-TCVariablePointerr/w
Textual Convention: SNMPv2-TCVariablePointer ObjectIdentifier
 .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.23

cfmAccPortQosShaperTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.3 · 1 row entry · 4 columns
Open in standard view 
A list of configurable profile entries for CFM QoS Shapers for Access Port.
cfmAccPortQosShaperEntry entry .1.3.6.1.4.1.2544.1.12.13.1.1.3.1
A list of parameters that set up the CFM QoS Queue profiles.
This shaper is created automatically when the first Down MEP
is created on a Access Port.
Indexes
CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex CM-FACILITY-MIBcmEthernetAccPortIndex cfmAccPortQosShaperIndex
Column Syntax OID
cfmAccPortQosShaperIndex
A unique index associated with the type of Access Port Based Shaper.
Index 1 refers to the Shaper associated with PORT-based Down MEPs,
Index 2 refers to the Shaper associated with the VID-based Down MEPs.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.3.1.1
cfmAccPortQosShaperCIR
This object identifies the queue CIR.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.3.1.2
cfmAccPortQosShaperBufSize
This object identifies the queue buffer size.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.3.1.3
cfmAccPortQosShaperAdminState
This object allows the management of the Shaper Administrative State.
Only 'in-service' and 'management' states are allowed.
CM-COMMON-MIBAdminStater/w
Textual Convention: CM-COMMON-MIBAdminState Enumeration
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.13.1.1.3.1.4

cfmNetPortQosShaperTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.4 · 1 row entry · 4 columns
Open in standard view 
A list of configurable profile entries for CFM QoS Shapers for Network Port.
cfmNetPortQosShaperEntry entry .1.3.6.1.4.1.2544.1.12.13.1.1.4.1
A list of parameters that set up the CFM QoS Queue profiles.
This shaper is created automatically when the first Down MEP
is created on a Network Port.
Indexes
CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex CM-FACILITY-MIBcmEthernetNetPortIndex cfmNetPortQosShaperTypeIndex
Column Syntax OID
cfmNetPortQosShaperTypeIndex
A unique index associated with the type of Network Port Based Shaper.
Index 1 refers to the Shaper associated with PORT-based Down MEPs,
Index 2 refers to the Shaper associated with the VID-based Down MEPs.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.4.1.1
cfmNetPortQosShaperCIR
This object identifies the queue CIR.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.4.1.2
cfmNetPortQosShaperBufSize
This object identifies the queue buffer size.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.4.1.3
cfmNetPortQosShaperAdminState
This object allows the management of the Shaper Administrative State.
Only 'in-service' and 'management' states are allowed.
CM-COMMON-MIBAdminStater/w
Textual Convention: CM-COMMON-MIBAdminState Enumeration
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.13.1.1.4.1.4

cfmServerMepTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.5 · 1 row entry · 11 columns
Open in standard view 
Server MEP management table.
cfmServerMepEntry entry .1.3.6.1.4.1.2544.1.12.13.1.1.5.1
This allows management of Server MEPs.
Indexes
cfmServerMepIndex
Column Syntax OID
cfmServerMepIndex
The integer index value corresponding to a Server MEP.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.1
cfmServerMepAssociatedPort
This is the port on which the CFM Server MEP is created.
SNMPv2-TCVariablePointerr/w
Textual Convention: SNMPv2-TCVariablePointer ObjectIdentifier
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.2
cfmServerMepAisClientMdLevel
AIS Client MD level which is the MD level used to identify any
higher level local MEPs for which AIS defect needs to be set or
MD level of the ETH-AIS frame generated if there are no local MEPs
at this MD level.
IEEE8021-CFM-MIBDot1agCfmMDLevelr/w
Textual Convention: IEEE8021-CFM-MIBDot1agCfmMDLevel Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.3
cfmServerMepAisInterval
ETH-AIS frame transmission interval if decision is made to transmit the
ETH-AIS frame.
CfmAisIntervalr/w
Textual Convention: CfmAisInterval Enumeration
Type Values:
1aisInterval1sec
2aisInterval1min
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.4
cfmServerMepAisGenEnabled
This flag enables/disables propagation of ETH-AIS to client MD levels.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.5
cfmServerMepAisPriority
This VLAN priority of the ETH-AIS frame.
CM-COMMON-MIBVlanPriorityr/w
Textual Convention: CM-COMMON-MIBVlanPriority Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.6
cfmServerMepStorageType
The type of storage configured for this entry.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.7
cfmServerMepRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.8
cfmServerMepAdminState
This object represents the Administrative State of the Server MEP.
CM-COMMON-MIBAdminStater/w
Textual Convention: CM-COMMON-MIBAdminState Enumeration
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.9
cfmServerMepOperationalState
This object represents the Operational State of the Server MEP.
CM-COMMON-MIBOperationalState
Textual Convention: CM-COMMON-MIBOperationalState Enumeration
Type Values:
1normal
2outage
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.10
cfmServerMepSecondaryState
This object represents the Secondary State of the CFM MEP.
CM-COMMON-MIBSecondaryState
Textual Convention: CM-COMMON-MIBSecondaryState Bits
Type Values:
0not-applicable
1active
2automaticinservice
3facilityfailure
4fault
5loopback
6maintenance
7mismatchedeqpt
8standbyhot
9supportingentityoutage
10unassigned
11unequipped
12disabled
13forcedoffline
14initializing
15prtcl
16blckd
17mon-tx
18mir-rx
19cema
20lkdo
 .1.3.6.1.4.1.2544.1.12.13.1.1.5.1.11

cfmDownMEPQosShaperTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.6 · 1 row entry · 5 columns
Open in standard view 
A list of configurable profile entries for CFM QoS Shapers for down MEPs.
cfmDownMEPQosShaperEntry entry .1.3.6.1.4.1.2544.1.12.13.1.1.6.1
A list of parameters that set up the CFM QoS Queue profiles.
This shaper is created automatically when the first Down MEP
is created on a Port. Note, this queues is valid for port based Down MEPs, VID based down MEPs on…
Indexes
CM-ENTITY-MIBneIndex CM-ENTITY-MIBshelfIndex CM-ENTITY-MIBslotIndex CM-FACILITY-MIBcmEthernetTrafficPortIndex cfmDownMEPQosShaperType cfmDownMEPQosShaperIndex
Column Syntax OID
cfmDownMEPQosShaperIndex
A unique index associated with the Shaper for Down MEPs.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.6.1.1
cfmDownMEPQosShaperType
Type of Shaper for Down MEPs.
1 refers to the Shaper associated with Down MEPs(for both port based and VID based) fot Transimit direction,
2 refers to the Shaper associated with Down MEPs(for both port based and VID ba…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.6.1.2
cfmDownMEPQosShaperCIR
This object identifies the queue CIR.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.6.1.3
cfmDownMEPQosShaperProfile
This object identifies the OID of cmQosQueueProfileIndex in the cmQosQueueProfileTable.
SNMPv2-TCVariablePointerr/w
Textual Convention: SNMPv2-TCVariablePointer ObjectIdentifier
 .1.3.6.1.4.1.2544.1.12.13.1.1.6.1.4
cfmDownMEPQosShaperAdminState
This object allows the management of the Shaper Administrative State.
Only 'in-service' and 'management' states are allowed.
CM-COMMON-MIBAdminStater/w
Textual Convention: CM-COMMON-MIBAdminState Enumeration
Type Values:
1in-service
2management
3maintenance
4disabled
5unassigned
6monitored
 .1.3.6.1.4.1.2544.1.12.13.1.1.6.1.5

cfmMepExcludedMepListTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.7 · 1 row entry · 2 columns
Open in standard view 
A list of configurable profile entries for CFM excluded mep list.
cfmMepExcludedMepListEntry entry .1.3.6.1.4.1.2544.1.12.13.1.1.7.1
Excluded Remote Mep List for local Mep, not expected to receive OAM from these MEPs.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier cfmMepExcludedMepListIdentifier
Column Syntax OID
cfmMepExcludedMepListIdentifier
A unique index associated with CfmMepExcludedMepListEntry.
Unsigned32
Constraints:
range: 1-8191
 .1.3.6.1.4.1.2544.1.12.13.1.1.7.1.1
cfmMepExcludedMepListRowStatus
The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.

The values o…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2544.1.12.13.1.1.7.1.2

cfmMepLbrTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.8 · 1 row entry · 4 columns
Open in standard view 
A list of configurable profile entries for MepLbr.
cfmMepLbrEntry entry .1.3.6.1.4.1.2544.1.12.13.1.1.8.1
MEP LBR statistic table.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier cfmMepLbrMacAddress
Column Syntax OID
cfmMepLbrMacAddress
Source Mac Address of LBR.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2544.1.12.13.1.1.8.1.1
cfmMepLbrMepId
Remote MEP ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2544.1.12.13.1.1.8.1.2
cfmMepLbrInOrder
Total valid in-order LBR received.
CM-COMMON-MIBPerfCounter64
Textual Convention: CM-COMMON-MIBPerfCounter64 Unsigned64
 .1.3.6.1.4.1.2544.1.12.13.1.1.8.1.3
cfmMepLbrOutOfOder
Total valid out of order LBR received.
CM-COMMON-MIBPerfCounter64
Textual Convention: CM-COMMON-MIBPerfCounter64 Unsigned64
 .1.3.6.1.4.1.2544.1.12.13.1.1.8.1.4

cfmMaCompTable

table
.1.3.6.1.4.1.2544.1.12.13.1.1.9 · 1 row entry · 2 columns
Open in standard view 
A additional list of MA components.
cfmMaCompEntry entry .1.3.6.1.4.1.2544.1.12.13.1.1.9.1
A list of additional maCompEntry.
Indexes
No indexes recorded
Column Syntax OID
cfmMaCompIndex
This object represents the maComp number value.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2544.1.12.13.1.1.9.1.1
cfmMaCompEntity
This object represents the maComp entity, it is should be port or flow's oid.
SNMPv2-TCVariablePointerr/w
Textual Convention: SNMPv2-TCVariablePointer ObjectIdentifier
 .1.3.6.1.4.1.2544.1.12.13.1.1.9.1.2