cfmMepAisGenTriggerTypes

F3-CFM-MIB · .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.2
MIB view Table view

Object

column r/w CfmAisGenTriggerTypes 
A bit mask which indicates all the defects that result in triggering
an AIS for the higher level MEP or transmission of ETH-AIS.

Context

MIB
F3-CFM-MIB
OID
.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.2
Type
column
Access
readwrite
Status
current
Parent
cfmMepEntry
Table
cfmMepTable
Siblings
22

Syntax

CfmAisGenTriggerTypes
Source
CfmAisGenTriggerTypes
Base type
Bits

Values & Constraints

Type Values
0bAisDefRemoteCCM
1bAisDefErrorCCM
2bAisDefXconCCM
3bAisDefAis

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cfmMepAdminState
This object represents the Administrative State of the CFM MEPs.
columnCM-COMMON-MIBAdminState.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.1
cfmMepLmCountInProfileEnabled
As per the Y.1731 data frames counted for loss measurement shall be in-profile (green) data frames. As an added value, this flag is provided for the device to count all frames ins…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.10
cfmMepLmTxPriority
This attribute is used if cfmMepLmTxCountAllPrios is false. This attribute serves three purposes: - It is the VLAN priority of the LMM. - Data frames transmitted and received with…
columnCM-COMMON-MIBVlanPriority.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.11
cfmMepDmPriority
This attribute specifies the DMM frame VLAN priority.
columnCM-COMMON-MIBVlanPriority.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.12
cfmMepRxCCMs
This provides the total number of received CCMs on the MEP.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.13
cfmMepErrCCMs
This provides the total number of errored CCMs on the MEP.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.14
cfmMepLLFTriggerTypes
This bit mask indicates the CFM triggers that result in link loss forwarding.
columnCfmLLFTriggerTypes.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.15
cfmMepDefects
This bit mask indicates defects that not defined in standard 802.1ag MIB such as AIS defect.
columnCfmMepDefects.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.16
cfmMepTagEtherType
This object allows management of Ether Type for MEP VLAN Tag for the MEPs.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.17
cfmMepStatsAction
Allows the Manager to clear the CFM level statistics : cfmMepRxCCMs, cfmMepErrCCMs.
columnCM-COMMON-MIBCmPmBinAction.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.18
cfmMepLbmInterval
ETH-LBM frame transmission interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.19
cfmMepOperationalState
This object represents the Operational State of the CFM MEP.
columnCM-COMMON-MIBOperationalState.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.20
cfmMepSecondaryState
This object represents the Secondary State of the CFM MEP.
columnCM-COMMON-MIBSecondaryState.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.21
cfmMepSlmEnabled
This bit mask indicates the whether SLM is enabled per each COS.
columnCfmSlmEnabledTypes.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.22
cfmMepAssociatedObject
This object represents the associated port, it could be port, flow or flow point.
columnSNMPv2-TCVariablePointer.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.23
cfmMepAisClientMdLevel
AIS Client MD level which is the MD level used to identify any higher level local MEPs for which AIS defect needs to be set or MD level of the ETH-AIS frame generated if there are…
columnIEEE8021-CFM-MIBDot1agCfmMDLevel.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.3
cfmMepAisInterval
ETH-AIS frame transmission interval if decision is made to transmit the ETH-AIS frame.
columnCfmAisInterval.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.4
cfmMepAisGenEnabled
This flag enables/disables propagation of ETH-AIS to client MD levels.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.5
cfmMepAisPriority
This VLAN priority of the ETH-AIS frame.
columnCM-COMMON-MIBVlanPriority.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.6
cfmMepLmTxCountAllPriosEnabled
This attribute is used when Y.1731 probes are created and LMM frames are transmitted. As per Y.1731, loss measurement should be done per priority class. The implementation is rest…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.7
cfmMepLmRxCountAllPriosEnabled
This attribute is used when Y.1731 probes are created and LMR frames are transmitted. As per Y.1731, loss measurement should be done per priority class. The implementation is rest…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.8
cfmMepLmDualEndedCountAllPriosEnabled
This attribute is used when Y.1731 probes are created and CCM frames are transmitted with loss measurement counts. As per Y.1731, loss measurement should be done per priority clas…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.9