cfmMepLLFTriggerTypes
F3-CFM-MIB ·
.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.15
Object
column
r/w
CfmLLFTriggerTypes
This bit mask indicates the CFM triggers that result in link loss forwarding.
Context
- MIB
- F3-CFM-MIB
- OID
.1.3.6.1.4.1.2544.1.12.13.1.1.2.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cfmMepEntry
- Table
- cfmMepTable
- Siblings
- 22
Syntax
CfmLLFTriggerTypes
- Source
- CfmLLFTriggerTypes
- Base type
Bits
Values & Constraints
Type Values
0 | bAis |
1 | bCcmIfStatusTlv |
2 | bRemoteCCM |
3 | bRDI |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cfmMepAdminState This object represents the Administrative State of the CFM MEPs. | column | CM-COMMON-MIBAdminState | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.1 |
| cfmMepLmCountInProfileEnabled As per the Y.1731 data frames counted for loss measurement shall be
in-profile (green) data frames. As an added value, this flag is
provided for the device to count all frames ins… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.10 |
| cfmMepLmTxPriority This attribute is used if cfmMepLmTxCountAllPrios is false.
This attribute serves three purposes:
- It is the VLAN priority of the LMM.
- Data frames transmitted and received with… | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.11 |
| cfmMepDmPriority This attribute specifies the DMM frame VLAN priority. | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.12 |
| cfmMepRxCCMs This provides the total number of received CCMs on the MEP. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.13 |
| cfmMepErrCCMs This provides the total number of errored CCMs on the MEP. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.14 |
| cfmMepDefects This bit mask indicates defects that not defined in standard 802.1ag
MIB such as AIS defect. | column | CfmMepDefects | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.16 |
| cfmMepTagEtherType This object allows management of Ether Type for MEP VLAN Tag for the MEPs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.17 |
| cfmMepStatsAction Allows the Manager to clear the CFM level
statistics : cfmMepRxCCMs, cfmMepErrCCMs. | column | CM-COMMON-MIBCmPmBinAction | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.18 |
| cfmMepLbmInterval ETH-LBM frame transmission interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.19 |
| cfmMepAisGenTriggerTypes A bit mask which indicates all the defects that result in triggering
an AIS for the higher level MEP or transmission of ETH-AIS. | column | CfmAisGenTriggerTypes | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.2 |
| cfmMepOperationalState This object represents the Operational State of the CFM MEP. | column | CM-COMMON-MIBOperationalState | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.20 |
| cfmMepSecondaryState This object represents the Secondary State of the CFM MEP. | column | CM-COMMON-MIBSecondaryState | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.21 |
| cfmMepSlmEnabled This bit mask indicates the whether SLM is enabled per each COS. | column | CfmSlmEnabledTypes | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.22 |
| cfmMepAssociatedObject This object represents the associated port, it could be port, flow or flow point. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.23 |
| cfmMepAisClientMdLevel AIS Client MD level which is the MD level used to identify any
higher level local MEPs for which AIS defect needs to be set or
MD level of the ETH-AIS frame generated if there are… | column | IEEE8021-CFM-MIBDot1agCfmMDLevel | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.3 |
| cfmMepAisInterval ETH-AIS frame transmission interval if decision is made to transmit the
ETH-AIS frame. | column | CfmAisInterval | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.4 |
| cfmMepAisGenEnabled This flag enables/disables propagation of ETH-AIS to client MD levels. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.5 |
| cfmMepAisPriority This VLAN priority of the ETH-AIS frame. | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.6 |
| cfmMepLmTxCountAllPriosEnabled This attribute is used when Y.1731 probes are created and LMM frames
are transmitted. As per Y.1731, loss measurement should be done per
priority class. The implementation is rest… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.7 |
| cfmMepLmRxCountAllPriosEnabled This attribute is used when Y.1731 probes are created and LMR frames
are transmitted. As per Y.1731, loss measurement should be done per
priority class. The implementation is rest… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.8 |
| cfmMepLmDualEndedCountAllPriosEnabled This attribute is used when Y.1731 probes are created and CCM frames
are transmitted with loss measurement counts. As per Y.1731, loss
measurement should be done per priority clas… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.13.1.1.2.1.9 |