ENLOGIC-PDU-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

273

pduNamePlateTable

table

.1.3.6.1.4.1.38446.1.1.2 · 1 row entry · 15 columns

Open in standard view

A table of PDU nameplate data

pduNamePlateEntry entry .1.3.6.1.4.1.38446.1.1.2.1

Nameplate data from the PDU being queried. The numbers of entries equals the value of pduNamePlateTableSize.

Indexes

No indexes recorded

Column Syntax OID

pduNamePlateIndex

The index of the PDU nameplate table entry

Integer32

.1.3.6.1.4.1.38446.1.1.2.1.1

pduNamePlateName

A user-defined string identifying the PDU

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.1.1.2.1.2

pduNamePlateLocation

A user-defined string identifying the location of PDU

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.1.1.2.1.3

pduNamePlateInetAddressType

The type of address format

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.38446.1.1.2.1.4

pduNamePlateIPAddress

The current IP address. A value of 0.0.0.0 indicates an error or an unset option

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.1.1.2.1.5

pduNamePlateInetNetMask

The current netmask. A value of 0.0.0.0 indiates an error or an unset option

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.1.1.2.1.6

pduNamePlateInetGateway

The current gateway. A value of 0.0.0.0 indicates an error or an unset option

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.1.1.2.1.7

pduNamePlateMACAddress

The assigned MAC address for the PDU

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.38446.1.1.2.1.8

pduNamePlateUTCTimeOffset

The difference in hours and minutes from Coordinated Universal
Time(UTC) for the time used in a particular time zone

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.1.1.2.1.9

pduNamePlateModelNumber

The PDU model number

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.1.1.2.1.10

pduNamePlateSerialNumber

The PDU serial number

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.1.1.2.1.11

pduNamePlateDateofManufacture

The date the PDU was manufactured in mm/dd/yyyy format

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.1.1.2.1.12

pduNamePlateFirmwareVersion

The PDU firmware version

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.1.1.2.1.13

pduNamePlateFirmwareVersionTimeStamp

Timestamp of when the PDU firmware was last updated

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.1.1.2.1.14

pduNamePlateType

The type of Unit, PDU or Inline Meter

Enumeration

.1.3.6.1.4.1.38446.1.1.2.1.15

pduUnitConfigTable

table

.1.3.6.1.4.1.38446.1.2.2 · 1 row entry · 21 columns

Open in standard view

A table of PDU configuration data

pduUnitConfigEntry entry .1.3.6.1.4.1.38446.1.2.2.1

Configuration data from the PDU being queried. The number of entries equals the value of pduUnitTableSize

Indexes

No indexes recorded

Column	Syntax	OID
pduUnitConfigIndex The index of the PDU Unit Config Entry	Integer32	`.1.3.6.1.4.1.38446.1.2.2.1.1`
pduUnitConfigName A user-defined string identifying the PDU	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.2.2.1.2`
pduUnitConfigLocation A user-defined string identifying the location of the PDU	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.2.2.1.3`
pduUnitConfigDisplayOrientation Indicates the intended physical orientation of the oLED display displayNormal (1) indicates normal orientation. displayReverse (2) indicates upside down orientation	Enumerationr/w	`.1.3.6.1.4.1.38446.1.2.2.1.4`
pduUnitConfigColdstartDelay The amount of time, specified in seconds, between when power is provided to the PDU and when the PDU start providing basic master power to the outlets	Unsigned32r/w	`.1.3.6.1.4.1.38446.1.2.2.1.5`
pduUnitConfigGlobalOutletStateOnStartup The outlet state on device startup; applies to all outlets unless overridden at the outlet level	Enumerationr/w	`.1.3.6.1.4.1.38446.1.2.2.1.6`
pduUnitConfigLowerCriticalThreshold User-defined lower critical unit active power alarm threshold measured in Watts	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.2.2.1.7`
pduUnitConfigLowerWarningThreshold User-defined lower non-critical (warning) unit active power alarm threshold measured in Watts	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.2.2.1.8`
pduUnitConfigUpperCriticalThreshold User-defined upper critical unit active power alarm threshold measured in Watts	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.2.2.1.9`
pduUnitConfigUpperWarningThreshold User-defined upper non-critical (warning) unit active power alarm threshold measured in Watts	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.2.2.1.10`
pduUnitConfigAlarmResetThreshold The hysteresis used for deassertions in Watts	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.2.2.1.11`
pduUnitConfigAlarmStateChangeDelay The delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecutive…	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.2.2.1.12`
pduUnitConfigEnabledThresholds A bit string indicating which alarm thresholds are enabled	Bitsr/w	`.1.3.6.1.4.1.38446.1.2.2.1.13`
pduUnitConfigPeakPowerReset Setting this OID to reset (2) will cause the existing peak power value to be replaced by the current load power value. Getting this OID will do nothing and return the noOperation(1) value.	Enumerationr/w	`.1.3.6.1.4.1.38446.1.2.2.1.14`
pduUnitConfigEnergyReset Setting this OID to reset (2) will cause the device energy meter value to be reset to zero. Getting this OID in models that support this feature will do nothing and return the noOperation(1) value. Models that do not…	Enumerationr/w	`.1.3.6.1.4.1.38446.1.2.2.1.15`
pduUnitConfigOutletPeakPowerReset Setting this OID to reset (2) will cause the outlet peak power meter value to be reset to zero. Getting this OID in models that support this feature will do nothing and return the noOperation(1) value. Models that do…	Enumerationr/w	`.1.3.6.1.4.1.38446.1.2.2.1.16`
pduUnitConfigOutletEnergyReset Setting this OID to reset (2) will cause the outlet energy meter value to be reset to zero. Getting this OID in models that support this feature will do nothing and return the noOperation(1) value. Models that do not…	Enumerationr/w	`.1.3.6.1.4.1.38446.1.2.2.1.17`
pduUnitConfigUsb Setting this OID to off(0) will disable the USB port. Setting this OID to on(1) will enable the USB port.	Enumerationr/w	`.1.3.6.1.4.1.38446.1.2.2.1.18`
pduUnitConfigSsh Setting this OID to off(0) will disable the SSH connection. Setting this OID to on(1) will enable the SSH connection.	Enumerationr/w	`.1.3.6.1.4.1.38446.1.2.2.1.19`
pduUnitConfigResetNetworkManagementCard Getting this OID will return noOperation(0). Setting this OID to reset(1) will reset NMC.	Enumerationr/w	`.1.3.6.1.4.1.38446.1.2.2.1.20`
pduUnitConfigDaisyChainState Setting this OID to daisychain(0) will enable daisychain mode.	Enumerationr/w	`.1.3.6.1.4.1.38446.1.2.2.1.21`

pduUnitPropertiesTable

table

.1.3.6.1.4.1.38446.1.2.3 · 1 row entry · 17 columns

Open in standard view

A table of PDU properties

pduUnitPropertiesEntry entry .1.3.6.1.4.1.38446.1.2.3.1

A unit properties entry containing objects for a particular unit.

Indexes

No indexes recorded

Column	Syntax	OID
pduUnitPropertiesIndex The index of the PDU properties table entry	Integer32	`.1.3.6.1.4.1.38446.1.2.3.1.1`
pduUnitPropertiesName A user-defined string identifying the PDU	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.2.3.1.2`
pduUnitPropertiesOutletCount The total number of outlets on the PDU	Integer32	`.1.3.6.1.4.1.38446.1.2.3.1.3`
pduUnitPropertiesSwitchedOutletCount The total number of switched outlets on the PDU	Integer32	`.1.3.6.1.4.1.38446.1.2.3.1.4`
pduUnitPropertiesMeteredOutletCount The total number of metered outlets on the PDU	Integer32	`.1.3.6.1.4.1.38446.1.2.3.1.5`
pduUnitPropertiesInputPhaseCount The total number of phases on the PDU	Integer32	`.1.3.6.1.4.1.38446.1.2.3.1.6`
pduUnitPropertiesCircuitBreakerCount The total number of circuit breaker on the PDU	Integer32	`.1.3.6.1.4.1.38446.1.2.3.1.7`
pduUnitPropertiesMaxExternalSensorCount The maximum number of external sensors that can be connected to the PDU	Integer32	`.1.3.6.1.4.1.38446.1.2.3.1.8`
pduUnitPropertiesConnExternalSensorCount The current number of external sensors connected to the PDU	Integer32	`.1.3.6.1.4.1.38446.1.2.3.1.9`
pduUnitPropertiesRatedVoltage The PDU voltage rating in Volts	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.2.3.1.10`
pduUnitPropertiesRatedMaxCurrent The PDU current rating in Amps	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.2.3.1.11`
pduUnitPropertiesRatedFrequency The PDU frequency rating in Hz	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.2.3.1.12`
pduUnitPropertiesRatedPower The PDU VA (VoltAmps) rating.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.2.3.1.13`
pduUnitPropertiesOrientation The PDU orientation	Enumeration	`.1.3.6.1.4.1.38446.1.2.3.1.14`
pduUnitPropertiesOutletLayout The outlet layout for the PDU. Getting this OID will return outlet layout for the device. seqPhaseToNeutral(1) indicates outlet layout as follows: 1:1-N,2:2-N,3:3-N,4:1-N,5:2-N,... seqPhaseToPhase(2) indicates outlet la…	Enumeration	`.1.3.6.1.4.1.38446.1.2.3.1.15`
pduUnitPropertiesDaisyChainMemberType The daisy-chain member type	Enumeration	`.1.3.6.1.4.1.38446.1.2.3.1.16`
pduUnitPropertiesServerCount The number of servers	Integer32	`.1.3.6.1.4.1.38446.1.2.3.1.17`

pduUnitStatusTable

table

.1.3.6.1.4.1.38446.1.2.4 · 1 row entry · 12 columns

Open in standard view

A table of PDU status information

pduUnitStatusEntry entry .1.3.6.1.4.1.38446.1.2.4.1

Status information from the PDU being queried

Indexes

No indexes recorded

Column	Syntax	OID
pduUnitStatusIndex The index of the PDU status table entry	Integer32	`.1.3.6.1.4.1.38446.1.2.4.1.1`
pduUnitStatusName A user-defined string identifying the PDU	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.2.4.1.2`
pduUnitStatusLoadState Returns the present load status of the PDU based on Active Power.	Enumeration	`.1.3.6.1.4.1.38446.1.2.4.1.3`
pduUnitStatusActivePower Returns power consumption, in Watts(W), of the PDU being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.2.4.1.4`
pduUnitStatusApparentPower Returns power consumption, in Volt-Amps(VA) of the PDU load being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.2.4.1.5`
pduUnitStatusPeakPower Returns peak power consumption, in Watts(W), of the PDU being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.2.4.1.6`
pduUnitStatusPeakPowerTimestamp Indicates the date and time that peak power consumption occurred	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.2.4.1.7`
pduUnitStatusPeakPowerStartTime Indicates the date and time of the last device peak power reset	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.2.4.1.8`
pduUnitStatusEnergy Returns total energy consumed, in tenths of Kilowatt-Hours(kWh), of the PDU over its lifetime.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.2.4.1.9`
pduUnitStatusResettableEnergy A user resettable energy meter measuring PDU energy consumption in tenths of kilowatt-hours(kWh).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.2.4.1.10`
pduUnitStatusEnergyStartTime Indicates the date and time of the last device energy meter reset	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.2.4.1.11`
pduUnitStatusOutletsEnergyStartTime Indicates the date and time of the last outlets energy meter reset	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.2.4.1.12`

pduInputPhaseConfigTable

table

.1.3.6.1.4.1.38446.1.3.2 · 1 row entry · 17 columns

Open in standard view

A table of PDU Input Phase configuration data

pduInputPhaseConfigEntry entry .1.3.6.1.4.1.38446.1.3.2.1

An input phase entry containing objects for a particular input phase.

Indexes

No indexes recorded

Column	Syntax	OID
pduInputPhaseConfigIndex The index of the PDU Input Phase configuration table entry	Integer32	`.1.3.6.1.4.1.38446.1.3.2.1.1`
pduInputPhaseConfigCount The total number of Input Phases	Integer32	`.1.3.6.1.4.1.38446.1.3.2.1.2`
pduInputPhaseConfigOverloadRestriction This OID controls the behavior of a Switched PDU Input Phase when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will always allow th…	Enumerationr/w	`.1.3.6.1.4.1.38446.1.3.2.1.3`
pduInputPhaseConfigCurrentLowerCriticalThreshold User-defined lower critical input phase current alarm threshold in hundredths of Amps(A).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.3.2.1.4`
pduInputPhaseConfigCurrentLowerWarningThreshold User-defined lower non-critical (warning) input phase current alarm threshold in hundredths of Amps(A).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.3.2.1.5`
pduInputPhaseConfigCurrentUpperCriticalThreshold User-defined upper critical input phase current alarm threshold in hundredths of Amps(A).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.3.2.1.6`
pduInputPhaseConfigCurrentUpperWarningThreshold User-defined upper non-critical (warning) input phase current alarm threshold in hundredths of Amps(A).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.3.2.1.7`
pduInputPhaseConfigVoltageLowerCriticalThreshold User-defined lower critical input phase voltage alarm threshold in Volts(V).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.3.2.1.8`
pduInputPhaseConfigVoltageLowerWarningThreshold User-defined lower non-critical (warning) input phase voltage alarm threshold in Volts(V).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.3.2.1.9`
pduInputPhaseConfigVoltageUpperCriticalThreshold User-defined upper critical input phase voltage alarm threshold in Volts(V).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.3.2.1.10`
pduInputPhaseConfigVoltageUpperWarningThreshold User-defined upper non-critical (warning) input phase voltage alarm threshold in Volts(V).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.3.2.1.11`
pduInputPhaseConfigCurrentAlarmResetThreshold The hysteresis used for current alarm deassertions in hundredths of Amps(A).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.3.2.1.12`
pduInputPhaseConfigCurrentAlarmStateChangeDelay The delay measured in samples before a current state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 …	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.3.2.1.13`
pduInputPhaseConfigCurrentEnabledThresholds A bit string indicating which current alarm thresholds are enabled.	Bitsr/w	`.1.3.6.1.4.1.38446.1.3.2.1.14`
pduInputPhaseConfigVoltageAlarmResetThreshold The hysteresis used for voltage alarm deassertions in Volts(V).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.3.2.1.15`
pduInputPhaseConfigVoltageAlarmStateChangeDelay The delay measured in samples before a voltage state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 …	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.3.2.1.16`
pduInputPhaseConfigVoltageEnabledThresholds A bit string indicating which voltage alarm thresholds are enabled.	Bitsr/w	`.1.3.6.1.4.1.38446.1.3.2.1.17`

pduInputPhasePropertiesTable

table

.1.3.6.1.4.1.38446.1.3.3 · 1 row entry · 2 columns

Open in standard view

A table of PDU Input Phase properties

pduInputPhasePropertiesEntry entry .1.3.6.1.4.1.38446.1.3.3.1

An input phase properties entry containing objects for a particular input phase.

Indexes

No indexes recorded

Column	Syntax	OID
pduInputPhasePropertiesIndex The index of the PDU Input Phase status entry	Integer32	`.1.3.6.1.4.1.38446.1.3.3.1.1`
pduInputPhasePropertiesCount The numeric Input Phase ID	Integer32	`.1.3.6.1.4.1.38446.1.3.3.1.2`

pduInputPhaseStatusTable

table

.1.3.6.1.4.1.38446.1.3.4 · 1 row entry · 9 columns

Open in standard view

A table of PDU Input Phase status data

pduInputPhaseStatusEntry entry .1.3.6.1.4.1.38446.1.3.4.1

An input phase status entry containing objects for a particular input phase.

Indexes

No indexes recorded

Column	Syntax	OID
pduInputPhaseStatusIndex The index of the PDU Input Phase status entry	Integer32	`.1.3.6.1.4.1.38446.1.3.4.1.1`
pduInputPhaseStatusCount The numeric Input Phase ID	Integer32	`.1.3.6.1.4.1.38446.1.3.4.1.2`
pduInputPhaseStatusCurrentState Indicates the present current status of the PDU Phase in case of Y connection or PDU Line in case of Delta conneciton.	Enumeration	`.1.3.6.1.4.1.38446.1.3.4.1.3`
pduInputPhaseStatusVoltageState Indicates the present voltage status of the PDU Input Phase being queried	Enumeration	`.1.3.6.1.4.1.38446.1.3.4.1.4`
pduInputPhaseStatusCurrent Returns the current draw, in hundredths of Amps(A), of the load on the PDU Phase/Line being queried. Nodes with pduInputPhaseStatusIndex from 1 to 3 indicate Y connection Phase values or Delta connection Line values…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.3.4.1.5`
pduInputPhaseStatusVoltage Returns the voltage, in Volts(V), of the PDU Phase/Line being queried. Nodes with pduInputPhaseStatusIndex from 1 to 3 indicate Y connection Phase values or Delta connection Line values, and nodes with pduInputPhaseSta…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.3.4.1.6`
pduInputPhaseStatusActivePower Returns power consumption, in Watts(W), consumed on the PDU Phase/Line being queried. Nodes with pduInputPhaseStatusIndex from 1 to 3 indicate Y connection Phase values or Delta connection Line values, and nodes with p…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.3.4.1.7`
pduInputPhaseStatusApparentPower Returns power consumption, in Volt-Amps(VA), of the PDU Phase/Line being queried. Nodes with pduInputPhaseStatusIndex from 1 to 3 indicate Y connection Phase values or Delta connection Line values, and nodes with pduI…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.3.4.1.8`
pduInputPhaseStatusPowerFactor Returns the ratio of active to apparent power of the PDU Phase/Line being queried. Nodes with pduInputPhaseStatusIndex from 1 to 3 indicate Y connection Phase values or Delta connection Line values, and nodes with pdu…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.3.4.1.9`

pduCircuitBreakerConfigTable

table

.1.3.6.1.4.1.38446.1.4.2 · 1 row entry · 11 columns

Open in standard view

A table of PDU Circuit Breaker configuration data

pduCircuitBreakerConfigEntry entry .1.3.6.1.4.1.38446.1.4.2.1

A circuit breaker configuration entry containing objects for a particular circuit breaker.

Indexes

No indexes recorded

Column	Syntax	OID
pduCircuitBreakerConfigIndex The index of the PDU Circuit Breaker configuration table entry	Integer32	`.1.3.6.1.4.1.38446.1.4.2.1.1`
pduCircuitBreakerConfigCount The number of circuit breakers on the PDU	Integer32	`.1.3.6.1.4.1.38446.1.4.2.1.2`
pduCircuitBreakerName The label of the circuit breaker	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.4.2.1.3`
pduCircuitBreakerConfigOverloadRestriction This OID controls the behavior of a Switched PDU Circuit Breaker when an overload condition is possible and additional outlets are requested to be turned on. Setting this OID to alwaysAllowTurnON (1) will always allo…	Enumerationr/w	`.1.3.6.1.4.1.38446.1.4.2.1.4`
pduCircuitBreakerConfigLowerCriticalThreshold User-defined lower critical circuit breaker current alarm threshold in hundredths of Amps(A).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.4.2.1.5`
pduCircuitBreakerConfigLowerWarningThreshold User-defined lower non-critical (warning) circuit breaker current alarm threshold in hundredths of Amps(A).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.4.2.1.6`
pduCircuitBreakerConfigUpperCriticalThreshold User-defined upper critical circuit breaker current alarm threshold in hundredths of Amps(A).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.4.2.1.7`
pduCircuitBreakerConfigUpperWarningThreshold User-defined upper non-critical (warning) circuit breaker current alarm threshold in hundredths of Amps(A).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.4.2.1.8`
pduCircuitBreakerConfigAlarmResetThreshold The hysteresis used for deassertions in hundredths of Amps(A).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.4.2.1.9`
pduCircuitBreakerConfigAlarmStateChangeDelay The delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecut…	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.4.2.1.10`
pduCircuitBreakerConfigEnabledThresholds A bit string indicating which alarm thresholds are enabled.	Bitsr/w	`.1.3.6.1.4.1.38446.1.4.2.1.11`

pduCircuitBreakerPropertiesTable

table

.1.3.6.1.4.1.38446.1.4.3 · 1 row entry · 3 columns

Open in standard view

A table of PDU circuit breaker properties

pduCircuitBreakerPropertiesEntry entry .1.3.6.1.4.1.38446.1.4.3.1

A circuit breaker properties entry containing objects for a particular circuit breaker.

Indexes

No indexes recorded

Column	Syntax	OID
pduCircuitBreakerPropertiesIndex The index of the PDU Circuit Breaker properties table entry	Integer32	`.1.3.6.1.4.1.38446.1.4.3.1.1`
pduCircuitBreakerPropertiesCount The number of Circuit Breakers	Integer32	`.1.3.6.1.4.1.38446.1.4.3.1.2`
pduCircuitBreakerPropertiesInputLayout This OID describes the outlet phase connections on the referenced bank as follows: seqPhase1ToNeutral(1) indicates that outlets attached to circuit breaker are connected from Phase 1 to Neutral. seqPhase2ToNeutral(2…	Enumeration	`.1.3.6.1.4.1.38446.1.4.3.1.3`

pduCircuitBreakerStatusTable

table

.1.3.6.1.4.1.38446.1.4.4 · 1 row entry · 5 columns

Open in standard view

A table of PDU circuit breaker status data

pduCircuitBreakerStatusEntry entry .1.3.6.1.4.1.38446.1.4.4.1

A circuit breaker status entry containing objects for a particular circuit breaker.

Indexes

No indexes recorded

Column	Syntax	OID
pduCircuitBreakerStatusIndex The index of the PDU Circuit Breaker status table entry	Integer32	`.1.3.6.1.4.1.38446.1.4.4.1.1`
pduCircuitBreakerStatusCount The number of Circuit Breakers	Integer32	`.1.3.6.1.4.1.38446.1.4.4.1.2`
pduCircuitBreakerLabel The label on the PDU identifying the circuit breaker	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.4.4.1.3`
pduCircuitBreakerStatusLoadState Indicates the present load status of the PDU Circuit Breaker being queried	Enumeration	`.1.3.6.1.4.1.38446.1.4.4.1.4`
pduCircuitBreakerStatusCurrent Returns the current draw, in hundredths of Amps(A), of the load on the PDU Circuit Breaker being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.4.4.1.5`

pduOutletSwitchedConfigTable

table

.1.3.6.1.4.1.38446.1.5.2 · 1 row entry · 6 columns

Open in standard view

A table of PDU Switched Outlet configuration data

pduOutletSwitchedConfigEntry entry .1.3.6.1.4.1.38446.1.5.2.1

An outlet configuration entry containing objects for a particular outlet.

Indexes

No indexes recorded

Column	Syntax	OID
pduOutletSwitchedConfigIndex The index of the PDU Switched Outlet configuration table entry	Integer32	`.1.3.6.1.4.1.38446.1.5.2.1.1`
pduOutletSwitchedName The user-defined name for the Switched Outlet	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.5.2.1.2`
pduOutletSwitchedStateOnStartup The outlet state on device startup; overrides the global value pduUnitConfigGlobalOutletStateOnStartup.	Enumerationr/w	`.1.3.6.1.4.1.38446.1.5.2.1.3`
pduOutletSwitchedConfigPowerOnTime The amount of delay, in seconds, between when power is provided to outlets the outlet and when this outlet starts providing power	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.5.2.1.4`
pduOutletSwitchedConfigPowerOffTime The amount of time, in seconds, this outlet will delay powering off	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.5.2.1.5`
pduOutletSwitchedConfigRebootDuration The amount of time, in seconds, this outlet will remain in powered off state before returning to power on state during a reboot action.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.5.2.1.6`

pduOutletSwitchedPropertiesTable

table

.1.3.6.1.4.1.38446.1.5.3 · 1 row entry · 5 columns

Open in standard view

A table of PDU Switched Outlet properties

pduOutletSwitchedPropertiesEntry entry .1.3.6.1.4.1.38446.1.5.3.1

An outlet properties entry containing objects for a particular outlet.

Indexes

No indexes recorded

Column	Syntax	OID
pduOutletSwitchedPropertiesIndex The index of the PDU Switched Outlet properties table entry	Integer32	`.1.3.6.1.4.1.38446.1.5.3.1.1`
pduOutletSwitchedPropertiesNumber The numeric Switched Outlet ID	Integer32	`.1.3.6.1.4.1.38446.1.5.3.1.2`
pduOutletSwitchedPropertiesName The user-defined switched outlet ID string	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.5.3.1.3`
pduOutletSwitchedPropertiesInputPhaseLayout This OID describes the outlet phase connections on the referenced bank as follows: seqPhase1ToNeutral(1) indicates that outlets attached to Switched Outlet are connected from Phase 1 to Neutral. seqPhase2ToNeutral(2…	Enumeration	`.1.3.6.1.4.1.38446.1.5.3.1.4`
pduOutletSwitchedPropertiesCircuitBreaker The numeric Circuit Breaker ID	Integer32	`.1.3.6.1.4.1.38446.1.5.3.1.5`

pduOutletSwitchedStatusTable

table

.1.3.6.1.4.1.38446.1.5.4 · 1 row entry · 4 columns

Open in standard view

A table of PDU Switched Outlet status data

pduOutletSwitchedStatusEntry entry .1.3.6.1.4.1.38446.1.5.4.1

Status data from the PDU Switched Outlet being queried

Indexes

No indexes recorded

Column	Syntax	OID
pduOutletSwitchedStatusIndex The index of the PDU Switched Outlet status table entry	Integer32	`.1.3.6.1.4.1.38446.1.5.4.1.1`
pduOutletSwitchedStatusNumber The numeric Switched Outlet ID	Integer32	`.1.3.6.1.4.1.38446.1.5.4.1.2`
pduOutletSwitchedStatusName The user-defined switched outlet ID string	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.5.4.1.3`
pduOutletSwitchedStatusState Indicates the present switch state of the PDU switched outlet being queried	Enumeration	`.1.3.6.1.4.1.38446.1.5.4.1.4`

pduOutletSwitchedControlTable

table

.1.3.6.1.4.1.38446.1.5.5 · 1 row entry · 4 columns

Open in standard view

A table of PDU Switched Outlet status data

pduOutletSwitchedControlEntry entry .1.3.6.1.4.1.38446.1.5.5.1

Status data from the PDU Switched Outlet
being queried

Indexes

No indexes recorded

Column	Syntax	OID
pduOutletSwitchedControlIndex The index to the PDU switched outlet control data table entry	Integer32	`.1.3.6.1.4.1.38446.1.5.5.1.1`
pduOutletSwitchedControlNumber The numeric Switched Outlet ID	Integer32	`.1.3.6.1.4.1.38446.1.5.5.1.2`
pduOutletSwitchedControlName The user-defined switched outlet ID string	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.5.5.1.3`
pduOutletSwitchedControlCommand Getting this variable will return the outlet state. If the outlet is on, the immediateOn (2) value will be returned. If the outlet is off, the immediateOff (1) value will be returned. If the state of the outlet canno…	Enumerationr/w	`.1.3.6.1.4.1.38446.1.5.5.1.4`

pduOutletMeteredConfigTable

table

.1.3.6.1.4.1.38446.1.5.7 · 1 row entry · 9 columns

Open in standard view

A table of PDU Metered Outlet configuration data

pduOutletMeteredConfigEntry entry .1.3.6.1.4.1.38446.1.5.7.1

An outlet configuration entry containing objects for a particular outlet.

Indexes

No indexes recorded

Column	Syntax	OID
pduOutletMeteredConfigIndex The index of the PDU Metered Outlet configuration table entry	Integer32	`.1.3.6.1.4.1.38446.1.5.7.1.1`
pduOutletMeteredName The user-defined name for the Metered Outlet	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.5.7.1.2`
pduOutletMeteredConfigLowerCriticalThreshold User-defined lower critical outlet active power alarm threshold in Watts(W).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.5.7.1.3`
pduOutletMeteredConfigLowerWarningThreshold User-defined lower non-critical (warning) outlet active power alarm threshold in Watts(W).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.5.7.1.4`
pduOutletMeteredConfigUpperCriticalThreshold User-defined upper critical outlet active power alarm threshold in Watts(W).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.5.7.1.5`
pduOutletMeteredConfigUpperWarningThreshold User-defined upper non-critical (warning) outlet active power alarm threshold in Watts(W).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.5.7.1.6`
pduOutletMeteredConfigAlarmResetThreshold The hysteresis used for deassertions in Watts(W).	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.5.7.1.7`
pduOutletMeteredConfigAlarmStateChangeDelay The delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecu…	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.5.7.1.8`
pduOutletMeteredConfigEnabledThresholds A bit string indicating which alarm thresholds are enabled.	Bitsr/w	`.1.3.6.1.4.1.38446.1.5.7.1.9`

pduOutletMeteredPropertiesTable

table

.1.3.6.1.4.1.38446.1.5.8 · 1 row entry · 6 columns

Open in standard view

A table of PDU Metered Outlet properties

pduOutletMeteredPropertiesEntry entry .1.3.6.1.4.1.38446.1.5.8.1

Configuration data from the PDU Metered
Outlet being queried

Indexes

No indexes recorded

Column	Syntax	OID
pduOutletMeteredPropertiesIndex The index of the PDU Metered Outlet properties table entry	Integer32	`.1.3.6.1.4.1.38446.1.5.8.1.1`
pduOutletMeteredPropertiesNumber The numeric Metered Outlet ID	Integer32	`.1.3.6.1.4.1.38446.1.5.8.1.2`
pduOutletMeteredPropertiesName The user-defined Metered outlet ID string	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.5.8.1.3`
pduOutletMeteredPropertiesInputPhaseLayout This OID describes the outlet phase connections on the referenced bank as follows: seqPhase1ToNeutral(1) indicates that outlets attached to Metered Outlet are connected from Phase 1 to Neutral. seqPhase2ToNeutral(2)…	Enumeration	`.1.3.6.1.4.1.38446.1.5.8.1.4`
pduOutletMeteredPropertiesCircuitBreaker The numeric Circuit Breaker ID	Integer32	`.1.3.6.1.4.1.38446.1.5.8.1.5`
pduOutletMeteredPropertiesPowerRating Maximum power rating of the PDU metered outlet	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.5.8.1.6`

pduOutletMeteredStatusTable

table

.1.3.6.1.4.1.38446.1.5.9 · 1 row entry · 11 columns

Open in standard view

A table of PDU Metered Outlet status data

pduOutletMeteredStatusEntry entry .1.3.6.1.4.1.38446.1.5.9.1

Status data from the PDU Metered Outlet being queried

Indexes

No indexes recorded

Column	Syntax	OID
pduOutletMeteredStatusIndex The index of the PDU Metered Outlet status table entry	Integer32	`.1.3.6.1.4.1.38446.1.5.9.1.1`
pduOutletMeteredStatusNumber The numeric Metered Outlet ID	Integer32	`.1.3.6.1.4.1.38446.1.5.9.1.2`
pduOutletMeteredStatusName The user-defined Metered outlet ID string	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.5.9.1.3`
pduOutletMeteredStatusLoadState Returns the present load status of the PDU metered outlet being queried.	Enumeration	`.1.3.6.1.4.1.38446.1.5.9.1.4`
pduOutletMeteredStatusCurrent Returns the current draw, in hundredths of Amps(A), of the load on the PDU outlet being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.5.9.1.5`
pduOutletMeteredStatusActivePower Returns the power draw, in Watts(W), of the load on the PDU outlet being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.5.9.1.6`
pduOutletMeteredStatusPowerFactor Returns the ratio of active to apparent power of the PDU Outlet being queried	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.5.9.1.7`
pduOutletMeteredStatusPeakPower Returns peak power consumption, in Watts(W), of the Rack PDU outlet being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.5.9.1.8`
pduOutletMeteredStatusPeakPowerTimeStamp Indicates the date and time that this metered outlet's peak power consumption occurred	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.5.9.1.9`
pduOutletMeteredStatusPeakPowerStartTime Indicates the start date and time that this metered outlet began recording peak power observations	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.5.9.1.10`
pduOutletMeteredStatusResettableEnergy A user resettable energy meter measuring outlet load energy consumption in tenths of Kilowatt-Hours(kWh).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.5.9.1.11`

pduExternalSensorNamePlateTable

table

.1.3.6.1.4.1.38446.1.6.2 · 1 row entry · 8 columns

Open in standard view

A table of PDU ExternalSensorNamePlate data

pduExternalSensorNamePlateEntry entry .1.3.6.1.4.1.38446.1.6.2.1

External Sensor Name Plate data from the external
sensor being queried. The number of entries equals
the value of pduExternalSensorNamePlateTableSize.

Indexes

No indexes recorded

Column	Syntax	OID
pduExternalSensorNamePlateIndex The index of the PDU External Sensor status table entry	Integer32	`.1.3.6.1.4.1.38446.1.6.2.1.1`
pduExternalSensorNamePlateName A user-defined string identifying the external sensor	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.6.2.1.2`
pduExternalSensorNamePlateDescription A user-defined description of the external sensor	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.6.2.1.3`
pduExternalSensorNamePlateLocation A user-defined string identifying the location of the PDU	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.6.2.1.4`
pduExternalSensorNamePlateSerialNumber The serial number of the external sensor being queried	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.6.2.1.5`
pduExternalSensorNamePlateType The type of external sensor.	Enumeration	`.1.3.6.1.4.1.38446.1.6.2.1.6`
pduExternalSensorNamePlateUnits The base units the external sensor is measured in. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors.	Enumeration	`.1.3.6.1.4.1.38446.1.6.2.1.7`
pduExternalSensorNamePlateIdentifier Unique identifier of the external sensor.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.6.2.1.8`

pduExternalSensorConfigTable

table

.1.3.6.1.4.1.38446.1.6.3 · 1 row entry · 9 columns

Open in standard view

A table of PDU External Sensor configuration data

pduExternalSensorConfigEntry entry .1.3.6.1.4.1.38446.1.6.3.1

Configuration data from the PDU External
Sensor being queried

Indexes

No indexes recorded

Column	Syntax	OID
pduExternalSensorConfigIndex The index of the PDU External Sensor configuration table entry	Integer32	`.1.3.6.1.4.1.38446.1.6.3.1.1`
pduExternalSensorConfigLowerCriticalThreshold User-defined lower critical alarm threshold in pduExternalSensorNamePlateUnits.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.6.3.1.2`
pduExternalSensorConfigLowerWarningThreshold User-defined lower non-critical (warning) alarm threshold in pduExternalSensorNamePlateUnits.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.6.3.1.3`
pduExternalSensorConfigUpperCriticalThreshold User-defined upper critical alarm threshold in pduExternalSensorNamePlateUnits.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.6.3.1.4`
pduExternalSensorConfigUpperWarningThreshold User-defined upper non-critical (warning) alarm threshold in pduExternalSensorNamePlateUnits.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.6.3.1.5`
pduExternalSensorConfigAlarmResetThreshold The hysteresis used for deassertions.	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.6.3.1.6`
pduExternalSensorConfigAlarmStateChangeDelay The delay measured in samples before a state is asserted. If the value is zero, then the state is asserted as soon as it is detected; if it is non-zero, say n, then the assertion condition must exist for n+1 consecu…	SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.38446.1.6.3.1.7`
pduExternalSensorConfigEnabledThresholds A bit string indicating which alarm thresholds are enabled.	Bitsr/w	`.1.3.6.1.4.1.38446.1.6.3.1.8`
pduExternalSensorConfigAlarmState User defined alarm state of external sensor	Enumerationr/w	`.1.3.6.1.4.1.38446.1.6.3.1.9`

pduExternalSensorStatusTable

table

.1.3.6.1.4.1.38446.1.6.4 · 1 row entry · 8 columns

Open in standard view

A table of PDU External Sensor status data

pduExternalSensorStatusEntry entry .1.3.6.1.4.1.38446.1.6.4.1

Status data from the PDU External Sensor
being queried

Indexes

No indexes recorded

Column	Syntax	OID
pduExternalSensorStatusIndex The index of the PDU External Sensor status table entry	Integer32	`.1.3.6.1.4.1.38446.1.6.4.1.1`
pduExternalSensorStatusName The user-defined name for the External Sensor	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.6.4.1.2`
pduExternalSensorStatusAisle Indicates whether the external sensor is in a hot or cold aisle	Enumerationr/w	`.1.3.6.1.4.1.38446.1.6.4.1.3`
pduExternalSensorStatusCommStatus The communications status of the sensor	Enumeration	`.1.3.6.1.4.1.38446.1.6.4.1.4`
pduExternalSensorStatusState This OID reports the current state of the sensor. A notPresent (0) response indicates that no sensor is attached. An alarmed (1) response indicates that the sensor is present and its measured reading indicates alarmed…	Enumeration	`.1.3.6.1.4.1.38446.1.6.4.1.5`
pduExternalSensorStatusValue Sensor reading in pduExternalSensorConfigUnits value.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.6.4.1.6`
pduExternalSensorStatusTimeStamp The sensor reading timestamp.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.6.4.1.7`
pduExternalSensorStatusHighPrecisionValue Temperature sensor reading in tenths of pduExternalSensorConfigUnits value. This OID is applied to temperature sensor only	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.6.4.1.8`

pduServerPingTable

table

.1.3.6.1.4.1.38446.1.7.2 · 1 row entry · 3 columns

Open in standard view

A table of Server Ping data

pduServerPingEntry entry .1.3.6.1.4.1.38446.1.7.2.1

Server Ping data from the server being queried.
The number of entries equals the value of pduServerPingTableSize.

Indexes

No indexes recorded

Column	Syntax	OID
pduServerPingIndex The index of the PDU pduServerPing table entry	Integer32	`.1.3.6.1.4.1.38446.1.7.2.1.1`
pduServerPingServerIPAddress The IP Address/host name of the server	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.7.2.1.2`
pduServerPingEnabled Is ping enabled for this server?	Enumerationr/w	`.1.3.6.1.4.1.38446.1.7.2.1.3`

pduUnitSmartCabinetTable

table

.1.3.6.1.4.1.38446.1.8.2 · 1 row entry · 4 columns

Open in standard view

A table of Smart Cabinet information

pduUnitSmartCabinetEntry entry .1.3.6.1.4.1.38446.1.8.2.1

Information of Smart Cabinet

Indexes

No indexes recorded

Column	Syntax	OID
pduUnitSmartCabinetIndex The index of the PDU Smart Cabinet table entry	Integer32	`.1.3.6.1.4.1.38446.1.8.2.1.1`
pduUnitSmartCabinetCardUserName User name of ID card	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.8.2.1.2`
pduUnitSmartCabinetCardID Card ID.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.1.8.2.1.3`
pduUnitSmartCabinetTimestamp Indicates the date and time of information update	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.8.2.1.4`

trapsInfoTable

table

.1.3.6.1.4.1.38446.1.9.1.1 · 1 row entry · 7 columns

Open in standard view

A list of Trap Information entries. The number of
entries are given by the value of pduUnitTableSize.

trapsInfoEntry entry .1.3.6.1.4.1.38446.1.9.1.1.1

An entry containing objects used in traps

Indexes

No indexes recorded

Column	Syntax	OID
trapsInfoIndex The index of the traps table entry	Integer32	`.1.3.6.1.4.1.38446.1.9.1.1.1.1`
userName The user currently logged in.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.9.1.1.1.2`
userUpdated The user added, deleted, or modified.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.9.1.1.1.3`
firmwareVersion The version of Firmware.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.9.1.1.1.4`
roleUpdated The role added, deleted, or modified.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.9.1.1.1.5`
smtpRecipients Comma separated list of SMTP recipients	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.9.1.1.1.6`
smtpServer The IP address/host name of the SMTP server	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.1.9.1.1.1.7`

espNamePlateTable

table

.1.3.6.1.4.1.38446.2.1.2 · 1 row entry · 15 columns

Open in standard view

A table of es PDU nameplate data

espNamePlateEntry entry .1.3.6.1.4.1.38446.2.1.2.1

Nameplate data from the PDU being queried. The numbers of entries equals the value of espNamePlateTableSize.

Indexes

No indexes recorded

Column Syntax OID

espNamePlateIndex

The index of the es PDU nameplate table entry

Integer32

.1.3.6.1.4.1.38446.2.1.2.1.1

espNamePlateName

A user-defined string identifying the es PDU

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.2.1.2.1.2

espNamePlateLocation

A user-defined string identifying the location of PDU

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.2.1.2.1.3

espNamePlateInetAddressType

The type of address format

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.38446.2.1.2.1.4

espNamePlateIPAddress

The current IP address. A value of 0.0.0.0 indicates an error or an unset option

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.2.1.2.1.5

espNamePlateInetNetMask

The current netmask. A value of 0.0.0.0 indiates an error or an unset option

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.2.1.2.1.6

espNamePlateInetGateway

The current gateway. A value of 0.0.0.0 indicates an error or an unset option

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.2.1.2.1.7

espNamePlateMACAddress

The assigned MAC address for the PDU

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.38446.2.1.2.1.8

espNamePlateUTCTimeOffset

The difference in hours and minutes from Coordinated Universal
Time(UTC) for the time used in a particular time zone

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.2.1.2.1.9

espNamePlateModelNumber

The PDU model number

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.2.1.2.1.10

espNamePlateSerialNumber

The PDU serial number

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.2.1.2.1.11

espNamePlateDateofManufacture

The date the PDU was manufactured in mm/dd/yyyy format

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.2.1.2.1.12

espNamePlateFirmwareVersion

The PDU firmware version

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.2.1.2.1.13

espNamePlateFirmwareVersionTimeStamp

Timestamp of when the PDU firmware was last updated

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.38446.2.1.2.1.14

espNamePlateType

The type of Unit, PDU or Inline Meter

Enumeration

.1.3.6.1.4.1.38446.2.1.2.1.15

espUnitConfigTable

table

.1.3.6.1.4.1.38446.2.2.2 · 1 row entry · 5 columns

Open in standard view

A table of PDU configuration data

espUnitConfigEntry entry .1.3.6.1.4.1.38446.2.2.2.1

Configuration data from the PDU being queried. The number of entries equals the value of espUnitTableSize

Indexes

No indexes recorded

Column	Syntax	OID
espUnitConfigIndex The index of the PDU Unit Config Entry	Integer32	`.1.3.6.1.4.1.38446.2.2.2.1.1`
espUnitConfigName A user-defined string identifying the PDU	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.2.2.1.2`
espUnitConfigLocation A user-defined string identifying the location of the PDU	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.2.2.1.3`
espUnitConfigEnergyReset Setting this OID to reset (2) will cause the device energy meter value to be reset to zero. Getting this OID in models that support this feature will do nothing and return the noOperation(1) value. Models that do not…	Enumerationr/w	`.1.3.6.1.4.1.38446.2.2.2.1.15`
espUnitConfigResetNetworkManagementCard Getting this OID will return noOperation(0). Setting this OID to reset(1) will reset NMC.	Enumerationr/w	`.1.3.6.1.4.1.38446.2.2.2.1.20`

espUnitPropertiesTable

table

.1.3.6.1.4.1.38446.2.2.3 · 1 row entry · 13 columns

Open in standard view

A table of PDU properties

espUnitPropertiesEntry entry .1.3.6.1.4.1.38446.2.2.3.1

A unit properties entry containing objects for a particular unit.

Indexes

No indexes recorded

Column	Syntax	OID
espUnitPropertiesIndex The index of the PDU properties table entry	Integer32	`.1.3.6.1.4.1.38446.2.2.3.1.1`
espUnitPropertiesName A user-defined string identifying the PDU	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.2.3.1.2`
espUnitPropertiesOutletCount The total number of outlets on the PDU	Integer32	`.1.3.6.1.4.1.38446.2.2.3.1.3`
espUnitPropertiesSwitchedOutletCount The total number of switched outlets on the PDU	Integer32	`.1.3.6.1.4.1.38446.2.2.3.1.4`
espUnitPropertiesMeteredOutletCount The total number of metered outlets on the PDU	Integer32	`.1.3.6.1.4.1.38446.2.2.3.1.5`
espUnitPropertiesInputPhaseCount The total number of phases on the PDU	Integer32	`.1.3.6.1.4.1.38446.2.2.3.1.6`
espUnitPropertiesCircuitBreakerCount The total number of circuit breaker on the PDU	Integer32	`.1.3.6.1.4.1.38446.2.2.3.1.7`
espUnitPropertiesMaxExternalSensorCount The maximum number of external sensors that can be connected to the PDU	Integer32	`.1.3.6.1.4.1.38446.2.2.3.1.8`
espUnitPropertiesConnExternalSensorCount The current number of external sensors connected to the PDU	Integer32	`.1.3.6.1.4.1.38446.2.2.3.1.9`
espUnitPropertiesRatedVoltage The PDU voltage rating in Volts	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.2.3.1.10`
espUnitPropertiesRatedMaxCurrent The PDU current rating in Amps	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.2.3.1.11`
espUnitPropertiesRatedFrequency The PDU frequency rating in Hz	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.2.3.1.12`
espUnitPropertiesRatedPower The PDU VA (VoltAmps) rating.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.2.3.1.13`

espUnitStatusTable

table

.1.3.6.1.4.1.38446.2.2.4 · 1 row entry · 8 columns

Open in standard view

A table of PDU status information

espUnitStatusEntry entry .1.3.6.1.4.1.38446.2.2.4.1

Status information from the PDU being queried

Indexes

No indexes recorded

Column	Syntax	OID
espUnitStatusIndex The index of the PDU status table entry	Integer32	`.1.3.6.1.4.1.38446.2.2.4.1.1`
espUnitStatusName A user-defined string identifying the PDU	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.2.4.1.2`
espUnitStatusLoadState Returns the present load status of the PDU based on Active Power.	Enumeration	`.1.3.6.1.4.1.38446.2.2.4.1.3`
espUnitStatusActivePower Returns power consumption, in Watts(W), of the PDU being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.2.2.4.1.4`
espUnitStatusApparentPower Returns power consumption, in Volt-Amps(VA) of the PDU load being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.2.2.4.1.5`
espUnitStatusEnergy Returns total energy consumed, in tenths of Kilowatt-Hours(kWh), of the PDU over its lifetime.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.2.2.4.1.9`
espUnitStatusResettableEnergy A user resettable energy meter measuring PDU energy consumption in tenths of kilowatt-hours(kWh).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.2.2.4.1.10`
espUnitStatusEnergyStartTime Indicates the date and time of the last device energy meter reset	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.2.4.1.11`

espInputPhaseConfigTable

table

.1.3.6.1.4.1.38446.2.3.2 · 1 row entry · 2 columns

Open in standard view

A table of PDU Input Phase configuration data

espInputPhaseConfigEntry entry .1.3.6.1.4.1.38446.2.3.2.1

An input phase entry containing objects for a particular input phase.

Indexes

No indexes recorded

Column	Syntax	OID
espInputPhaseConfigIndex The index of the PDU Input Phase configuration table entry	Integer32	`.1.3.6.1.4.1.38446.2.3.2.1.1`
espInputPhaseConfigCount The total number of Input Phases	Integer32	`.1.3.6.1.4.1.38446.2.3.2.1.2`

espInputPhaseStatusTable

table

.1.3.6.1.4.1.38446.2.3.4 · 1 row entry · 9 columns

Open in standard view

A table of PDU Input Phase status data

espInputPhaseStatusEntry entry .1.3.6.1.4.1.38446.2.3.4.1

An input phase status entry containing objects for a particular input phase.

Indexes

No indexes recorded

Column	Syntax	OID
espInputPhaseStatusIndex The index of the PDU Input Phase status entry	Integer32	`.1.3.6.1.4.1.38446.2.3.4.1.1`
espInputPhaseStatusCount The numeric Input Phase ID	Integer32	`.1.3.6.1.4.1.38446.2.3.4.1.2`
espInputPhaseStatusCurrentState Indicates the present current status of the PDU Input Phase being queried	Enumeration	`.1.3.6.1.4.1.38446.2.3.4.1.3`
espInputPhaseStatusVoltageState Indicates the present voltage status of the PDU Input Phase being queried	Enumeration	`.1.3.6.1.4.1.38446.2.3.4.1.4`
espInputPhaseStatusCurrent Returns the current draw, in hundredths of Amps(A), of the load on the PDU Input Phase being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.2.3.4.1.5`
espInputPhaseStatusVoltage Returns the voltage, in Volts(V), of the PDU Input Phase being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.2.3.4.1.6`
espInputPhaseStatusActivePower Returns power consumption, in Watts(W), consumed on the PDU Input Phase being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.2.3.4.1.7`
espInputPhaseStatusApparentPower Returns power consumption, in Volt-Amps(VA), of the PDU Input Phase being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.2.3.4.1.8`
espInputPhaseStatusPowerFactor Returns the ratio of active to apparent power of the PDU Input Phase being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.2.3.4.1.9`

espCircuitBreakerConfigTable

table

.1.3.6.1.4.1.38446.2.4.2 · 1 row entry · 3 columns

Open in standard view

A table of PDU Circuit Breaker configuration data

espCircuitBreakerConfigEntry entry .1.3.6.1.4.1.38446.2.4.2.1

A circuit breaker configuration entry containing objects for a particular circuit breaker.

Indexes

No indexes recorded

Column	Syntax	OID
espCircuitBreakerConfigIndex The index of the PDU Circuit Breaker configuration table entry	Integer32	`.1.3.6.1.4.1.38446.2.4.2.1.1`
espCircuitBreakerConfigCount The number of circuit breakers on the PDU	Integer32	`.1.3.6.1.4.1.38446.2.4.2.1.2`
espCircuitBreakerName The label of the circuit breaker	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.4.2.1.3`

espCircuitBreakerPropertiesTable

table

.1.3.6.1.4.1.38446.2.4.3 · 1 row entry · 3 columns

Open in standard view

A table of PDU circuit breaker properties

espCircuitBreakerPropertiesEntry entry .1.3.6.1.4.1.38446.2.4.3.1

A circuit breaker properties entry containing objects for a particular circuit breaker.

Indexes

No indexes recorded

Column	Syntax	OID
espCircuitBreakerPropertiesIndex The index of the PDU Circuit Breaker properties table entry	Integer32	`.1.3.6.1.4.1.38446.2.4.3.1.1`
espCircuitBreakerPropertiesCount The number of Circuit Breakers	Integer32	`.1.3.6.1.4.1.38446.2.4.3.1.2`
espCircuitBreakerPropertiesInputLayout This OID describes the outlet phase connections on the referenced bank as follows: seqPhase1ToNeutral(1) indicates that outlets attached to circuit breaker are connected from Phase 1 to Neutral. seqPhase2ToNeutral(2…	Enumeration	`.1.3.6.1.4.1.38446.2.4.3.1.3`

espCircuitBreakerStatusTable

table

.1.3.6.1.4.1.38446.2.4.4 · 1 row entry · 5 columns

Open in standard view

A table of PDU circuit breaker status data

espCircuitBreakerStatusEntry entry .1.3.6.1.4.1.38446.2.4.4.1

A circuit breaker status entry containing objects for a particular circuit breaker.

Indexes

No indexes recorded

Column	Syntax	OID
espCircuitBreakerStatusIndex The index of the PDU Circuit Breaker status table entry	Integer32	`.1.3.6.1.4.1.38446.2.4.4.1.1`
espCircuitBreakerStatusCount The number of Circuit Breakers	Integer32	`.1.3.6.1.4.1.38446.2.4.4.1.2`
espCircuitBreakerLabel The label on the PDU identifying the circuit breaker	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.4.4.1.3`
espCircuitBreakerStatusLoadState Indicates the present load status of the PDU Circuit Breaker being queried	Enumeration	`.1.3.6.1.4.1.38446.2.4.4.1.4`
espCircuitBreakerStatusCurrent Returns the current draw, in hundredths of Amps(A), of the load on the PDU Circuit Breaker being queried.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.2.4.4.1.5`

espExternalSensorNamePlateTable

table

.1.3.6.1.4.1.38446.2.6.2 · 1 row entry · 5 columns

Open in standard view

A table of PDU ExternalSensorNamePlate data

espExternalSensorNamePlateEntry entry .1.3.6.1.4.1.38446.2.6.2.1

External Sensor Name Plate data from the external
sensor being queried. The number of entries equals
the value of espExternalSensorNamePlateTableSize.

Indexes

No indexes recorded

Column	Syntax	OID
espExternalSensorNamePlateIndex The index of the PDU External Sensor status table entry	Integer32	`.1.3.6.1.4.1.38446.2.6.2.1.1`
espExternalSensorNamePlateName A user-defined string identifying the external sensor	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.6.2.1.2`
espExternalSensorNamePlateSerialNumber The serial number of the external sensor being queried	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.6.2.1.5`
espExternalSensorNamePlateType The type of external sensor.	Enumeration	`.1.3.6.1.4.1.38446.2.6.2.1.6`
espExternalSensorNamePlateUnits The base units the external sensor is measured in. This parameter does not apply to onOff, trip, vibration, waterDetection, smokeDetection sensors.	Enumeration	`.1.3.6.1.4.1.38446.2.6.2.1.7`

espExternalSensorConfigTable

table

.1.3.6.1.4.1.38446.2.6.3 · 1 row entry · 2 columns

Open in standard view

A table of PDU External Sensor configuration data

espExternalSensorConfigEntry entry .1.3.6.1.4.1.38446.2.6.3.1

Configuration data from the PDU External
Sensor being queried

Indexes

No indexes recorded

Column	Syntax	OID
espExternalSensorConfigIndex The index of the PDU External Sensor configuration table entry	Integer32	`.1.3.6.1.4.1.38446.2.6.3.1.1`
espExternalSensorConfigAlarmState User defined alarm state of external sensor	Enumerationr/w	`.1.3.6.1.4.1.38446.2.6.3.1.9`

espExternalSensorStatusTable

table

.1.3.6.1.4.1.38446.2.6.4 · 1 row entry · 7 columns

Open in standard view

A table of PDU External Sensor status data

espExternalSensorStatusEntry entry .1.3.6.1.4.1.38446.2.6.4.1

Status data from the PDU External Sensor
being queried

Indexes

No indexes recorded

Column	Syntax	OID
espExternalSensorStatusIndex The index of the PDU External Sensor status table entry	Integer32	`.1.3.6.1.4.1.38446.2.6.4.1.1`
espExternalSensorStatusName The user-defined name for the External Sensor	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.38446.2.6.4.1.2`
espExternalSensorStatusAisle Indicates whether the external sensor is in a hot or cold aisle	Enumerationr/w	`.1.3.6.1.4.1.38446.2.6.4.1.3`
espExternalSensorStatusCommStatus The communications status of the sensor	Enumeration	`.1.3.6.1.4.1.38446.2.6.4.1.4`
espExternalSensorStatusState This OID reports the current state of the sensor. A notPresent (0) response indicates that no sensor is attached. An alarmed (1) response indicates that the sensor is present and its measured reading indicates alarmed…	Enumeration	`.1.3.6.1.4.1.38446.2.6.4.1.5`
espExternalSensorStatusValue Sensor reading in espExternalSensorConfigUnits value.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.2.6.4.1.6`
espExternalSensorStatusHighPrecisionValue Temperature sensor reading in tenths of espExternalSensorConfigUnits value. This OID is applied to temperature sensor only	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.38446.2.6.4.1.8`