EDS3030-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

378

dTrapTable

table

.1.3.6.1.4.1.31440.2.1 · 1 row entry · 4 columns

Open in standard view

Trap table

dTrapEntry entry .1.3.6.1.4.1.31440.2.1.1

Trap row

Indexes

dTrapIndex

Column	Syntax	OID
dTrapIndex Index of table.	Integer32 Constraints: `range: 1-127`	`.1.3.6.1.4.1.31440.2.1.1.1`
dTrapEnable Zero disables the trap, one enables it.	Integer32r/w Constraints: `range: 0-1`	`.1.3.6.1.4.1.31440.2.1.1.2`
dTrapIP Address to send trap to.	RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.31440.2.1.1.3`
dTrapCommunity Community string to send with trap message.	RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.2.1.1.4`

dTrapDeviceTable

table

.1.3.6.1.4.1.31440.2.2 · 1 row entry · 8 columns

Open in standard view

Trap device table

dTrapDeviceEntry entry .1.3.6.1.4.1.31440.2.2.1

Trap row

Indexes

dTrapDeviceIndex

Column	Syntax	OID
dTrapDeviceIndex Index of table. Traps are sent with this OID followed by the index number of the table entry that generated the trap. For example, if the values at index 5 of this table generated a trap, the name of the trap would be .…	Integer32 Constraints: `range: 1-127`	`.1.3.6.1.4.1.31440.2.2.1.1`
dTrapDeviceEnable Zero disables the trap, one enables it.	Integer32r/w Constraints: `range: 0-1`	`.1.3.6.1.4.1.31440.2.2.1.2`
dTrapDeviceSendPointer Indicates which entry in the Trap Table to use to determine where to send the trap. The Trap Table contains the destination IP address.	Integer32r/w Constraints: `range: 0-1`	`.1.3.6.1.4.1.31440.2.2.1.3`
dTrapDeviceROM Device ROM code to base sending trap message on.	OctetStringr/w Constraints: `range: 16-16`	`.1.3.6.1.4.1.31440.2.2.1.4`
dTrapDeviceVariable Number of the variable to reference, as listed in the Devices section of this MIB. For example, the DS2406 has 9 items, which would be numbered 0 - 8. So if dTrapDeviceVariable were set to 0 it would refer to owDS2406PI…	Integer32r/w Constraints: `range: 0-99`	`.1.3.6.1.4.1.31440.2.2.1.5`
dTrapDeviceHighThreshold A trap will be generated when the variable is greater than this value or it is less than or equal to this value - dTrapDeviceHysteresis. This number may be positive or negative and may contain a decimal point.	RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.2.2.1.6`
dTrapDeviceLowThreshold A trap will be generated when the variable is less than this value or it is greater than or equal to this value + dTrapDeviceHysteresis. This number may be positive or negative and may contain a decimal point.	RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.2.2.1.7`
dTrapDeviceHysteresis This value is used to limit repeated trap sends due to a value hovering around a threshold. If it is not used it should be set to zero. This number may be positive or negative and may contain a decimal point.	RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.2.2.1.8`

wTrapTable

table

.1.3.6.1.4.1.31440.3.1 · 1 row entry · 7 columns

Open in standard view

Wireless device trap table

wTrapEntry entry .1.3.6.1.4.1.31440.3.1.1

Indexes

wTrapIndex

Column	Syntax	OID
wTrapIndex Index of table. Traps are sent with this OID followed by the index number of the table entry that generated the trap. An integer value is sent with the trap which indicates what state change caused the trap. Using the w…	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.31440.3.1.1.1`
wTrapIP Address to send trap to.	RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.31440.3.1.1.2`
wTrapCommunity Community string to send with trap message.	RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.3.1.1.3`
wTrapEUI Device EUI code to base sending trap message on.	OctetStringr/w Constraints: `range: 16-16`	`.1.3.6.1.4.1.31440.3.1.1.4`
wTrapVariable Name of the variable, as stated in the XML file. For example, the name of humidity for a EDS1068 is 'Humidity' (without the quotes).	RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.3.1.1.5`
wTrapHighThreshold A trap will be generated when the variable is greater than this value or less than or equal to this value. This number may be positive or negative and may contain a decimal point.	RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.3.1.1.6`
wTrapLowThreshold A trap will be generated when the variable is less than this value or greater than or equal to this value. This number may be positive or negative and may contain a decimal point.	RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.3.1.1.7`

owDeviceTable

table

.1.3.6.1.4.1.31440.10.3 · 1 row entry · 7 columns

Open in standard view

Device table

owDeviceEntry entry .1.3.6.1.4.1.31440.10.3.1

Device row

Indexes

owDeviceIndex

Column	Syntax	OID
owDeviceIndex Index of table.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.31440.10.3.1.1`
owDeviceType An indication of the device type. This is the last OID number to the owDeviceTypes group pointing to the name of the device. The corresponding device table will contain the specific information from the device. For exam…	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.31440.10.3.1.2`
owDeviceName Text description of the device.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.3.1.3`
owDeviceDescription Text description of the device.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.3.1.4`
owDeviceFamily Family number as read from 1-wire device.	OctetString Constraints: `range: 2-2`	`.1.3.6.1.4.1.31440.10.3.1.5`
owDeviceROM Entire ROM code as read from 1-wire device (includes family number and CRC). Always 16 bytes long.	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.31440.10.3.1.6`
owDeviceHealth Health of device. Ranges between 0 and 8 where 0 worst case and 8 is best case. Incremented every time device responds to a search, decremented if it does not respond.	Integer32 Constraints: `range: 0-8`	`.1.3.6.1.4.1.31440.10.3.1.7`

owDS2406Table

table

.1.3.6.1.4.1.31440.10.4 · 1 row entry · 9 columns

Open in standard view

Table for DS2406 (dual addressable switch plus
1K bit memory).

owDS2406Entry entry .1.3.6.1.4.1.31440.10.4.1

DS2406 row

Indexes

owDeviceIndex

Column Syntax OID

owDS2406PIOALevel

PIO-A logic level on pin. If PIO-A flip flop is
low, this input will always read low.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.4.1.1

owDS2406PIOBLevel

PIO-B logic level on pin. If PIO-B flip flop is
low, this input will always read low.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.4.1.2

owDS2406PIOAFlipFlop

DS2406 PIO-A Flip Flop. Sets output state of the
FF. The output is open collector, so the FF must
be high (1) to be able to read a pin state of
low (0).

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.4.1.3

owDS2406PIOBFlipFlop

DS2406 PIO-B Flip Flop. Sets output state of the
FF. The output is open collector, so the FF must
be high (1) to be able to read a pin state of
low (0).

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.4.1.4

owDS2406PIOAActivityLatch

High (1) if the pin state had activity. Reset
by writing to activity latch reset.

Enumeration

Enumerated Values:

0	noActivity
1	yesActivity

.1.3.6.1.4.1.31440.10.4.1.5

owDS2406PIOBActivityLatch

High (1) if the pin state had activity. Reset
by writing to activity latch reset.

Enumeration

Enumerated Values:

0	noActivity
1	yesActivity

.1.3.6.1.4.1.31440.10.4.1.6

owDS2406NumChnls

Number of PIO channels the device supports. PIO-A
only is 0, PIO-A and PIO-B is 1.

Enumeration

Enumerated Values:

0	pioAonly
1	pioAandB

.1.3.6.1.4.1.31440.10.4.1.7

owDS2406PwrSupply

Source of power for device. 0 is parasite powered,
1 is externally powered.

Enumeration

Enumerated Values:

0	pwrParasite
1	pwrExternal

.1.3.6.1.4.1.31440.10.4.1.8

owDS2406ActivityLatchReset

Activity latch reset is used to reset both PIO-A
and PIO-B activity latch. Send 1 to reset the
latch. Always reads 0.

Enumerationr/w

Enumerated Values:

0	noReset
1	yesReset

.1.3.6.1.4.1.31440.10.4.1.9

owDS18B20Table

table

.1.3.6.1.4.1.31440.10.5 · 1 row entry · 5 columns

Open in standard view

Table for DS18B20 (programmable resolution 1-wire
digital thermometer).

owDS18B20Entry entry .1.3.6.1.4.1.31440.10.5.1

DS18B20 row

Indexes

owDeviceIndex

Column Syntax OID

owDS18B20Temperature

current temperature from device, desplayed as
a string with decimal point. Required since MIB's
cannot contain floating point numbers.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.31440.10.5.1.1

owDS18B20UserByte1

User byte 1 as read from EEPROM.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.31440.10.5.1.2

owDS18B20UserByte2

User byte 2 as read from EEPROM.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.31440.10.5.1.3

owDS18B20Resolution

Resolution of temperature reading, can be 9, 10,
11 or 12 bits. Default is 12 bits. 0 is 9 bits,
1 is 10 bits, 2 is 11 bits and 3 is 12 bits.

Enumeration

Enumerated Values:

9	nineBits
10	tenBits
11	elevenBits
12	twelveBits

.1.3.6.1.4.1.31440.10.5.1.4

owDS18B20PwrSupply

Power source. Parasite or external. Zero is parasite.

Enumeration

Enumerated Values:

0	parasitePower
255	externalPower

.1.3.6.1.4.1.31440.10.5.1.5

owDS18S20Table

table

.1.3.6.1.4.1.31440.10.6 · 1 row entry · 3 columns

Open in standard view

Table for DS18S20 device data.

owDS18S20Entry entry .1.3.6.1.4.1.31440.10.6.1

Indexes

owDeviceIndex

Column	Syntax	OID
owDS18S20Temperature Latest temperature reading, in degrees centigrade.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.6.1.1`
owDS18S20UserByte1 User byte from device EEPROM.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.31440.10.6.1.2`
owDS18S20UserByte2 User byte from device EEPROM.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.31440.10.6.1.3`

owDS2423Table

table

.1.3.6.1.4.1.31440.10.7 · 1 row entry · 2 columns

Open in standard view

Table for DS2423 device data.

owDS2423Entry entry .1.3.6.1.4.1.31440.10.7.1

DS2423 row

Indexes

owDeviceIndex

Column	Syntax	OID
owDS2423CounterA Counter A value.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.7.1.1`
owDS2423CounterB Counter B value.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.7.1.2`

owDS2438Table

table

.1.3.6.1.4.1.31440.10.8 · 1 row entry · 5 columns

Open in standard view

Table for DS2438 device data.

owDS2438Entry entry .1.3.6.1.4.1.31440.10.8.1

Indexes

owDeviceIndex

Column	Syntax	OID
owDS2438Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.8.1.1`
owDS2438SupplyVoltage Voltage of the power supply.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.8.1.2`
owDS2438PinVoltage Voltage at Pin Vad (pin 4).	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.8.1.3`
owDS2438current Voltage between the current pins.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.8.1.4`
owDS2438Humidity Calculated humidity.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.8.1.5`

owDS2408Table

table

.1.3.6.1.4.1.31440.10.9 · 1 row entry · 6 columns

Open in standard view

Table for DS2408 (8-channel addressable switch).

owDS2408Entry entry .1.3.6.1.4.1.31440.10.9.1

DS2408 row

Indexes

owDeviceIndex

Column Syntax OID

owDS2408PIOLogicState

Logic level on the 8 IO pins.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.31440.10.9.1.1

owDS2408PIOOutputLatchState

Output latch states. Sets output state of the
FFs. The output is open collector, so the FF must
be high (1) to be able to read a pin state of
low (0).

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.31440.10.9.1.2

owDS2408PIOActivityLatchState

High (1) if the pin state had activity. Reset
by writing to activity latch reset.

Enumerationr/w

Enumerated Values:

0	low
255	high

.1.3.6.1.4.1.31440.10.9.1.3

owDS2408RSTZConfiguration

Configures the RSTZ pin as a /RSTZ input (set to 0)
or a /STRB output (set to 1).

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.9.1.4

owDS2408PowerOnResetLatch

Set high (1) with a power on reset. Reset
by writing to a 0.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.9.1.5

owDS2408VCCPowerStatus

High (1) if the VCC pin is connected to power,
low (0) otherwise.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.9.1.6

owDS2450Table

table

.1.3.6.1.4.1.31440.10.10 · 1 row entry · 22 columns

Open in standard view

Table for DS2450 (8-channel addressable switch).

owDS2450Entry entry .1.3.6.1.4.1.31440.10.10.1

DS2450 row

Indexes

owDeviceIndex

Column Syntax OID

owDS2450ChannelAConversionValue

Conversion value of the channel, in volts.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.31440.10.10.1.1

owDS2450ChannelAConversionResolution

Conversion resolution of the channel. Can be set
between 1 and 16.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.31440.10.10.1.2

owDS2450ChannelAConversionRange

If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.3

owDS2450ChannelAOutputEnable

A setting of 1 enables the output transistor, use
ChannelXOutputControl to turn the transistor on / off.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.4

owDS2450ChannelAOutputControl

Set to low (0) to turn on the output transistor. Has
no effect if ChannelXOutputEnable is low (0).

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.5

owDS2450ChannelBConversionValue

Conversion value of the channel, in volts.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.31440.10.10.1.6

owDS2450ChannelBConversionResolution

Conversion resolution of the channel. Can be set
between 1 and 16.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.31440.10.10.1.7

owDS2450ChannelBConversionRange

If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.8

owDS2450ChannelBOutputEnable

A setting of 1 enables the output transistor, use
ChannelXOutputControl to turn the transistor on / off.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.9

owDS2450ChannelBOutputControl

Set to low (0) to turn on the output transistor. Has
no effect if ChannelXOutputEnable is low (0).

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.10

owDS2450ChannelCConversionValue

Conversion value of the channel, in volts.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.31440.10.10.1.11

owDS2450ChannelCConversionResolution

Conversion resolution of the channel. Can be set
between 1 and 16.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.31440.10.10.1.12

owDS2450ChannelCConversionRange

If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.13

owDS2450ChannelCOutputEnable

A setting of 1 enables the output transistor, use
ChannelXOutputControl to turn the transistor on / off.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.14

owDS2450ChannelCOutputControl

Set to low (0) to turn on the output transistor. Has
no effect if ChannelXOutputEnable is low (0).

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.15

owDS2450ChannelDConversionValue

Conversion value of the channel, in volts.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.31440.10.10.1.16

owDS2450ChannelDConversionResolution

Conversion resolution of the channel. Can be set
between 1 and 16.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.31440.10.10.1.17

owDS2450ChannelDConversionRange

If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.18

owDS2450ChannelDOutputEnable

A setting of 1 enables the output transistor, use
ChannelXOutputControl to turn the transistor on / off.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.19

owDS2450ChannelDOutputControl

Set to low (0) to turn on the output transistor. Has
no effect if ChannelXOutputEnable is low (0).

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.20

owDS2450PowerOnReset

Set high (1) with a power on reset. Reset
by writing any value.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.21

owDS2450VCCControl

Set high (1) if the VCC pin is connected to power,
set low (0) otherwise.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.10.1.22

owEDS0064Table

table

.1.3.6.1.4.1.31440.10.11 · 1 row entry · 2 columns

Open in standard view

Table for EDS0064 device data (temperature)

owEDS0064Entry entry .1.3.6.1.4.1.31440.10.11.1

EDS0064 row

Indexes

owDeviceIndex

Column	Syntax	OID
owEDS0064Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.11.1.1`
owEDS0064Counter Counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.11.1.2`

owEDS0065Table

table

.1.3.6.1.4.1.31440.10.12 · 1 row entry · 6 columns

Open in standard view

Table for EDS0065 device data (temperature and humiditiy).

owEDS0065Entry entry .1.3.6.1.4.1.31440.10.12.1

Indexes

owDeviceIndex

Column	Syntax	OID
owEDS0065Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.12.1.1`
owEDS0065Humidity Humidity.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.12.1.2`
owEDS0065DewPoint DewPoint.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.12.1.3`
owEDS0065Humidex Humidex.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.12.1.4`
owEDS0065HeatIndex Heat Index.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.12.1.5`
owEDS0065Counter Counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.12.1.6`

owEDS0066Table

table

.1.3.6.1.4.1.31440.10.13 · 1 row entry · 4 columns

Open in standard view

Table for EDS0001 device data (temperature and barometric pressure).

owEDS0066Entry entry .1.3.6.1.4.1.31440.10.13.1

Indexes

owDeviceIndex

Column	Syntax	OID
owEDS0066Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.13.1.1`
owEDS0066BarometricPressureMb Barometric Pressure in Millibars.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.13.1.2`
owEDS0066BarometricPressureHg Barometric Pressure in Inches of Mercury.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.13.1.3`
owEDS0066Counter Counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.13.1.4`

owEDS0067Table

table

.1.3.6.1.4.1.31440.10.14 · 1 row entry · 3 columns

Open in standard view

Table for EDS0067 device data (temperature and light).

owEDS0067Entry entry .1.3.6.1.4.1.31440.10.14.1

Indexes

owDeviceIndex

Column	Syntax	OID
owEDS0067Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.14.1.1`
owEDS0067Light Light.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.14.1.2`
owEDS0067Counter Counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.14.1.3`

owEDS0068Table

table

.1.3.6.1.4.1.31440.10.15 · 1 row entry · 9 columns

Open in standard view

Table for EDS0068 device data (temperature, humidity, barometric pressure and light).

owEDS0068Entry entry .1.3.6.1.4.1.31440.10.15.1

Indexes

owDeviceIndex

Column	Syntax	OID
owEDS0068Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.15.1.1`
owEDS0068Humidity Humidity.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.15.1.2`
owEDS0068DewPoint DewPoint.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.15.1.3`
owEDS0068Humidex Humidex.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.15.1.4`
owEDS0068HeatIndex Heat Index.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.15.1.5`
owEDS0068BarometricPressureMb Barometric Pressure in Millibars.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.15.1.6`
owEDS0068BarometricPressureHg Barometric Pressure in Inches of Mercury.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.15.1.7`
owEDS0068Light Light.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.15.1.8`
owEDS0068Counter Counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.15.1.9`

owEDS0069Table

table

.1.3.6.1.4.1.31440.10.16 · 1 row entry · 3 columns

Open in standard view

Table for EDS0069 device data (temperature and motion).

owEDS0069Entry entry .1.3.6.1.4.1.31440.10.16.1

Indexes

owDeviceIndex

Column	Syntax	OID
owEDS0069Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.16.1.1`
owEDS0069Motion Motion counter.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.16.1.2`
owEDS0069Counter Counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.16.1.3`

owEDS0070Table

table

.1.3.6.1.4.1.31440.10.17 · 1 row entry · 5 columns

Open in standard view

Table for EDS0070 device data (vibration).

owEDS0070Entry entry .1.3.6.1.4.1.31440.10.17.1

Indexes

owDeviceIndex

Column Syntax OID

owEDS0070VibrationInstant

Vibration, instant value.

Enumeration

Enumerated Values:

0	low
65535	high

.1.3.6.1.4.1.31440.10.17.1.1

owEDS0070VibrationPeak

Vibration, instant value.

Enumeration

Enumerated Values:

0	low
65535	high

.1.3.6.1.4.1.31440.10.17.1.2

owEDS0070VibrationMax

Vibration, instant value.

Enumeration

Enumerated Values:

0	low
65535	high

.1.3.6.1.4.1.31440.10.17.1.3

owEDS0070VibrationMin

Vibration, instant value.

Enumeration

Enumerated Values:

0	low
65535	high

.1.3.6.1.4.1.31440.10.17.1.4

owEDS0070Counter

Counter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.17.1.5

owEDS0071Table

table

.1.3.6.1.4.1.31440.10.18 · 1 row entry · 2 columns

Open in standard view

Table for EDS0071 device data (RTD 4-wire).

owEDS0071Entry entry .1.3.6.1.4.1.31440.10.18.1

Indexes

owDeviceIndex

Column	Syntax	OID
owEDS0071Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.18.1.1`
owEDS0071Counter Counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.18.1.2`

owEDS0080Table

table

.1.3.6.1.4.1.31440.10.19 · 1 row entry · 9 columns

Open in standard view

Table for EDS0080 device data (octal 4-20ma).

owEDS0080Entry entry .1.3.6.1.4.1.31440.10.19.1

Indexes

owDeviceIndex

Column	Syntax	OID
owEDS0080Input1 Input 1.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.19.1.1`
owEDS0080Input2 Input 2.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.19.1.2`
owEDS0080Input3 Input 3.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.19.1.3`
owEDS0080Input4 Input 4.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.19.1.4`
owEDS0080Input5 Input 5.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.19.1.5`
owEDS0080Input6 Input 6.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.19.1.6`
owEDS0080Input7 Input 7.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.19.1.7`
owEDS0080Input8 Input 8.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.19.1.8`
owEDS0080Counter Counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.19.1.9`

owEDS0082Table

table

.1.3.6.1.4.1.31440.10.20 · 1 row entry · 9 columns

Open in standard view

Table for EDS0082 device data (octal 0-10v).

owEDS0082Entry entry .1.3.6.1.4.1.31440.10.20.1

Indexes

owDeviceIndex

Column	Syntax	OID
owEDS0082Input1 Input 1.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.20.1.1`
owEDS0082Input2 Input 2.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.20.1.2`
owEDS0082Input3 Input 3.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.20.1.3`
owEDS0082Input4 Input 4.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.20.1.4`
owEDS0082Input5 Input 5.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.20.1.5`
owEDS0082Input6 Input 6.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.20.1.6`
owEDS0082Input7 Input 7.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.20.1.7`
owEDS0082Input8 Input 8.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.20.1.8`
owEDS0082Counter Counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.20.1.9`

owEDS0083Table

table

.1.3.6.1.4.1.31440.10.21 · 1 row entry · 5 columns

Open in standard view

Table for EDS0083 device data (quad 4-20ma).

owEDS0083Entry entry .1.3.6.1.4.1.31440.10.21.1

Indexes

owDeviceIndex

Column	Syntax	OID
owEDS0083Input1 Input 1.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.21.1.1`
owEDS0083Input2 Input 2.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.21.1.2`
owEDS0083Input3 Input 3.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.21.1.3`
owEDS0083Input4 Input 4.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.21.1.4`
owEDS0083Counter Counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.21.1.5`

owEDS0085Table

table

.1.3.6.1.4.1.31440.10.22 · 1 row entry · 5 columns

Open in standard view

Table for EDS0085 device data (quad 0-10v).

owEDS0085Entry entry .1.3.6.1.4.1.31440.10.22.1

Indexes

owDeviceIndex

Column	Syntax	OID
owEDS0085Input1 Input 1.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.22.1.1`
owEDS0085Input2 Input 2.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.22.1.2`
owEDS0085Input3 Input 3.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.22.1.3`
owEDS0085Input4 Input 4.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.22.1.4`
owEDS0085Counter Counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.22.1.5`

owEDS0090Table

table

.1.3.6.1.4.1.31440.10.23 · 1 row entry · 57 columns

Open in standard view

Table for EDS0090 device data (octal discrete IO).

owEDS0090Entry entry .1.3.6.1.4.1.31440.10.23.1

Indexes

owDeviceIndex

Column Syntax OID

owEDS0090Input1

Input 1.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.1

owEDS0090Input2

Input 2.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.2

owEDS0090Input3

Input 3.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.3

owEDS0090Input4

Input 4.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.4

owEDS0090Input5

Input 5.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.5

owEDS0090Input6

Input 6.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.6

owEDS0090Input7

Input 7.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.7

owEDS0090Input8

Input 8.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.8

owEDS0090ActivityLatch1

Activity Latch 1.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.23.1.9

owEDS0090ActivityLatch2

Activity Latch 2.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.23.1.10

owEDS0090ActivityLatch3

Activity Latch 3.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.23.1.11

owEDS0090ActivityLatch4

Activity Latch 4.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.23.1.12

owEDS0090ActivityLatch5

Activity Latch 5.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.23.1.13

owEDS0090ActivityLatch6

Activity Latch 6.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.23.1.14

owEDS0090ActivityLatch7

Activity Latch 7.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.23.1.15

owEDS0090ActivityLatch8

Activity Latch 8.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.23.1.16

owEDS0090PulseCounter1

Pulse Counter 1.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.23.1.17

owEDS0090PulseCounter2

Pulse Counter 2.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.23.1.18

owEDS0090PulseCounter3

Pulse Counter 3.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.23.1.19

owEDS0090PulseCounter4

Pulse Counter 4.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.23.1.20

owEDS0090PulseCounter5

Pulse Counter 5.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.23.1.21

owEDS0090PulseCounter6

Pulse Counter 6.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.23.1.22

owEDS0090PulseCounter7

Pulse Counter 7.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.23.1.23

owEDS0090PulseCounter8

Pulse Counter 8.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.23.1.24

owEDS0090Output1

Output 1.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.25

owEDS0090Output2

Output 2.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.26

owEDS0090Output3

Output 3.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.27

owEDS0090Output4

Output 4.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.28

owEDS0090Output5

Output 5.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.29

owEDS0090Output6

Output 6.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.30

owEDS0090Output7

Output 7.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.31

owEDS0090Output8

Output 8.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.32

owEDS0090PullDown1

PullDown 1.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.33

owEDS0090PullDown2

PullDown 1.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.34

owEDS0090PullDown3

PullDown 1.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.35

owEDS0090PullDown4

PullDown 1.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.36

owEDS0090PullDown5

PullDown 1.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.37

owEDS0090PullDown6

PullDown 1.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.38

owEDS0090PullDown7

PullDown 1.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.39

owEDS0090PullDown8

PullDown 1.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.23.1.40

owEDS0090ActivityLatchReset1

Activity Latch Reset 1.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.41

owEDS0090ActivityLatchReset2

Activity Latch Reset 2.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.42

owEDS0090ActivityLatchReset3

Activity Latch Reset 3.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.43

owEDS0090ActivityLatchReset4

Activity Latch Reset 4.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.44

owEDS0090ActivityLatchReset5

Activity Latch Reset 5.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.45

owEDS0090ActivityLatchReset6

Activity Latch Reset 6.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.46

owEDS0090ActivityLatchReset7

Activity Latch Reset 7.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.47

owEDS0090ActivityLatchReset8

Activity Latch Reset 8.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.48

owEDS0090PulseCounterReset1

Pulse Counter Reset 1.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.49

owEDS0090PulseCounterReset2

Pulse Counter Reset 2.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.50

owEDS0090PulseCounterReset3

Pulse Counter Reset 3.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.51

owEDS0090PulseCounterReset4

Pulse Counter Reset 4.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.52

owEDS0090PulseCounterReset5

Pulse Counter Reset 5.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.53

owEDS0090PulseCounterReset6

Pulse Counter Reset 6.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.54

owEDS0090PulseCounterReset7

Pulse Counter Reset 7.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.55

owEDS0090PulseCounterReset8

Pulse Counter Reset 8.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.23.1.56

owEDS0090Counter

Counter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.23.1.57

owEDS0091Table

table

.1.3.6.1.4.1.31440.10.24 · 1 row entry · 21 columns

Open in standard view

Table for EDS0091 device data (quad opto input).

owEDS0091Entry entry .1.3.6.1.4.1.31440.10.24.1

Indexes

owDeviceIndex

Column Syntax OID

owEDS0091Input1

Input 1.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.1

owEDS0091Input2

Input 2.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.2

owEDS0091Input3

Input 3.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.3

owEDS0091Input4

Input 4.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.4

owEDS0091ActivityLatch1

Activity Latch 1.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.5

owEDS0091ActivityLatch2

Activity Latch 2.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.6

owEDS0091ActivityLatch3

Activity Latch 3.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.7

owEDS0091ActivityLatch4

Activity Latch 4.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.8

owEDS0091PulseCounter1

Pulse Counter 1.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.24.1.9

owEDS0091PulseCounter2

Pulse Counter 1.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.24.1.10

owEDS0091PulseCounter3

Pulse Counter 1.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.24.1.11

owEDS0091PulseCounter4

Pulse Counter 1.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.24.1.12

owEDS0091PulseCounterReset1

Pulse Counter Reset 1.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.13

owEDS0091PulseCounterReset2

Pulse Counter Reset 2.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.14

owEDS0091PulseCounterReset3

Pulse Counter Reset 3.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.15

owEDS0091PulseCounterReset4

Pulse Counter Reset 4.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.16

owEDS0091ActivityLatchReset1

Activity Latch Reset 1.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.17

owEDS0091ActivityLatchReset2

Activity Latch Reset 2.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.18

owEDS0091ActivityLatchReset3

Activity Latch Reset 3.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.19

owEDS0091ActivityLatchReset4

Activity Latch Reset 4.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.24.1.20

owEDS0091Counter

Counter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.24.1.21

owEDS0092Table

table

.1.3.6.1.4.1.31440.10.25 · 1 row entry · 5 columns

Open in standard view

Table for EDS0092 device data (quad relay output).

owEDS0092Entry entry .1.3.6.1.4.1.31440.10.25.1

Indexes

owDeviceIndex

Column Syntax OID

owEDS0092Output1

Output 1.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.25.1.1

owEDS0092Output2

Output 2.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.25.1.2

owEDS0092Output3

Output 3.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.25.1.3

owEDS0092Output4

Output 4.

Enumeration

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.25.1.4

owEDS0092Counter

Counter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.25.1.5

owDS28EA00Table

table

.1.3.6.1.4.1.31440.10.26 · 1 row entry · 7 columns

Open in standard view

Table for DS28EA00 (1-wire
digital thermometer with PIO).

owDS28EA00Entry entry .1.3.6.1.4.1.31440.10.26.1

DS28EA00 row

Indexes

owDeviceIndex

Column Syntax OID

owDS28EA00Temperature

current temperature from device, displayed as
a string with decimal point. Required since MIB's
cannot contain floating point numbers.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.31440.10.26.1.1

owDS28EA00UserByte1

User byte 1 as read from EEPROM.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.31440.10.26.1.2

owDS28EA00UserByte2

User byte 2 as read from EEPROM.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.31440.10.26.1.3

owDS28EA00PIOALevel

PIO-A logic level on pin. If PIO-A flip flop is
low, this input will always read low.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.26.1.4

owDS28EA00PIOBLevel

PIO-B logic level on pin. If PIO-B flip flop is
low, this input will always read low.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.26.1.5

owDS28EA00PIOAFlipFlop

PIO-A Flip Flop. Sets output state of the
FF. The output is open collector, so the FF must
be high (1) to be able to read a pin state of
low (0).

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.26.1.6

owDS28EA00PIOBFlipFlop

PIO-B Flip Flop. Sets output state of the
FF. The output is open collector, so the FF must
be high (1) to be able to read a pin state of
low (0).

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.26.1.7

owEDS0050Table

table

.1.3.6.1.4.1.31440.10.27 · 1 row entry · 15 columns

Open in standard view

Table for EDS0050 (Temp, 
2 discrete, 1 analog (0-10v)).

owEDS0050Entry entry .1.3.6.1.4.1.31440.10.27.1

Indexes

owDeviceIndex

Column Syntax OID

owEDS0050Temperature

current temperature from device, displayed as
a string with decimal point. Required since MIB's
cannot contain floating point numbers.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.31440.10.27.1.1

owEDS0050InputVoltage

Voltage at the analog input.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.31440.10.27.1.2

owEDS0050Input1

Discrete state at input 1.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.27.1.3

owEDS0050Input2

Discrete state at input 2.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.27.1.4

owEDS0050ActivityLatch1

Set to 1 if input has changed.

Enumeration

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.27.1.5

owEDS0050ActivityLatch2

Set to 1 if input has changed.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.27.1.6

owEDS0050PulseCounter1

Count of the pulses on input 1.

SNMPv2-SMICounter32r/w

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.27.1.7

owEDS0050PulseCounter2

Count of the pulses on input 2.

SNMPv2-SMICounter32r/w

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.27.1.8

owEDS0050Output1

Output 1.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.27.1.9

owEDS0050Output2

Output 2.

Enumerationr/w

Enumerated Values:

0	low
1	high

.1.3.6.1.4.1.31440.10.27.1.10

owEDS0050ActivityLatchReset1

Activity Latch Reset 1.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.27.1.11

owEDS0050ActivityLatchReset2

Activity Latch Reset 2.

Enumerationr/w

Enumerated Values:

0	nofunction
1	reset

.1.3.6.1.4.1.31440.10.27.1.12

owEDS0050PulseCounterReset1

Pulse Counter Reset 1.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.27.1.13

owEDS0050PulseCounterReset2

Pulse Counter Reset 2.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.31440.10.27.1.14

owEDS0050Counter

Counter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.31440.10.27.1.15

owEDS0001Table

table

.1.3.6.1.4.1.31440.10.28 · 1 row entry · 17 columns

Open in standard view

Table for EDS0001 (System parameters).

owEDS0001Entry entry .1.3.6.1.4.1.31440.10.28.1

Indexes

owDeviceIndex

Column	Syntax	OID
owEDS0001PollCount Number of times devices have been polled.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.28.1.1`
owEDS0001DevicesConnected Number of devices connected.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.28.1.2`
owEDS0001LoopTime Time in seconds devices are read.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.28.1.3`
owEDS0001DevicesConnectedChannel1 Devices connected on channel 1.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.10.28.1.4`
owEDS0001DevicesConnectedChannel2 Devices connected on channel 2.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.10.28.1.5`
owEDS0001DevicesConnectedChannel3 Devices connected on channel 3.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.10.28.1.6`
owEDS0001ErrorsChannel1 Errors on channel 1.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.28.1.7`
owEDS0001ErrorsChannel2 Errors on channel 2.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.28.1.8`
owEDS0001ErrorsChannel3 Errors on channel 3.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.10.28.1.9`
owEDS0001VoltageChannel1 Voltage on channel 1.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.28.1.10`
owEDS0001VoltageChannel2 Voltage on channel 2.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.28.1.11`
owEDS0001VoltageChannel3 Voltage on channel 3.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.28.1.12`
owEDS0001InputVoltage Power supply voltage.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.28.1.13`
owEDS0001DeviceName Device name.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.28.1.14`
owEDS0001HostName Host name.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.28.1.15`
owEDS0001MACAddress Ethernet MAC address.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.28.1.16`
owEDS0001TimeStamp current date / time.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.10.28.1.17`

wDeviceTable

table

.1.3.6.1.4.1.31440.11.3 · 1 row entry · 8 columns

Open in standard view

wDeviceEntry entry .1.3.6.1.4.1.31440.11.3.1

Indexes

wDeviceIndex

Column	Syntax	OID
wDeviceIndex Index of table.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.31440.11.3.1.1`
wDeviceType An indication of the device type. This is the last OID number to the wDeviceTypes group pointing to the name of the device. The corresponding device table will contain the specific information from the device. For examp…	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.3.1.2`
wDeviceName Name of the device.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.3.1.3`
wDeviceDescription Text description of the device.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.3.1.4`
wDeviceFamily Family number.	OctetString Constraints: `range: 2-2`	`.1.3.6.1.4.1.31440.11.3.1.5`
wDeviceEUI Entire EUI as read from device.	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.31440.11.3.1.6`
wDeviceHealth Health of device. Ranges between 0 and 7 where 0 worst case and 7 is best case. Incremented every time device responds to a search, decremented if it does not respond.	Integer32 Constraints: `range: 0-8`	`.1.3.6.1.4.1.31440.11.3.1.7`
wDeviceTag Tag from device.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.3.1.8`

wEDS1068Table

table

.1.3.6.1.4.1.31440.11.4 · 1 row entry · 18 columns

Open in standard view

Table for EDS1068 device data (temperature, humidity, barometric pressure and light).

wEDS1068Entry entry .1.3.6.1.4.1.31440.11.4.1

Indexes

wDeviceIndex

Column	Syntax	OID
wEDS1068Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.4.1.1`
wEDS1068Humidity Humidity.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.4.1.2`
wEDS1068DewPoint DewPoint.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.4.1.3`
wEDS1068Humidex Humidex.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.4.1.4`
wEDS1068HeatIndex Heat Index.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.4.1.5`
wEDS1068BarometricPressure Barometric Pressure in Millibars.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.4.1.6`
wEDS1068LEDState LED state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.4.1.7`
wEDS1068RelayState Relay state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.4.1.8`
wEDS1068Light Light.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.4.1.9`
wEDS1068Input1 Input 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.4.1.10`
wEDS1068ActivityLatch1 Activity latch 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.4.1.11`
wEDS1068PulseCounter1 Pulse counter 1.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.4.1.12`
wEDS1068Battery Battery voltage.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.4.1.13`
wEDS1068ReadCounter Read counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.4.1.14`
wEDS1068LEDFunction LED function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.4.1.15`
wEDS1068RelayFunction Relay function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.4.1.16`
wEDS1068LEDSetState LED set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.4.1.17`
wEDS1068RelaySetState Relay set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.4.1.18`

wEDS1067Table

table

.1.3.6.1.4.1.31440.11.5 · 1 row entry · 13 columns

Open in standard view

Table for EDS1067 device data (temperature, humidity, barometric pressure and light).

wEDS1067Entry entry .1.3.6.1.4.1.31440.11.5.1

Indexes

wDeviceIndex

Column	Syntax	OID
wEDS1067Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.5.1.1`
wEDS1067LEDState LED state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.5.1.2`
wEDS1067RelayState Relay state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.5.1.3`
wEDS1067Light Light.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.5.1.4`
wEDS1067Input1 Input 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.5.1.5`
wEDS1067ActivityLatch1 Activity latch 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.5.1.6`
wEDS1067PulseCounter1 Pulse counter 1.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.5.1.7`
wEDS1067Battery Battery voltage.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.5.1.8`
wEDS1067ReadCounter Read counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.5.1.9`
wEDS1067LEDFunction LED function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.5.1.10`
wEDS1067RelayFunction Relay function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.5.1.11`
wEDS1067LEDSetState LED set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.5.1.12`
wEDS1067RelaySetState Relay set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.5.1.13`

wEDS1066Table

table

.1.3.6.1.4.1.31440.11.6 · 1 row entry · 13 columns

Open in standard view

Table for EDS1066 device data (temperature, humidity, barometric pressure and light).

wEDS1066Entry entry .1.3.6.1.4.1.31440.11.6.1

Indexes

wDeviceIndex

Column	Syntax	OID
wEDS1066Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.6.1.1`
wEDS1066BarometricPressure Barometric Pressure in Millibars.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.6.1.2`
wEDS1066LEDState LED state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.6.1.3`
wEDS1066RelayState Relay state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.6.1.4`
wEDS1066Input1 Input 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.6.1.5`
wEDS1066ActivityLatch1 Activity latch 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.6.1.6`
wEDS1066PulseCounter1 Pulse counter 1.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.6.1.7`
wEDS1066Battery Battery voltage.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.6.1.8`
wEDS1066ReadCounter Read counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.6.1.9`
wEDS1066LEDFunction LED function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.6.1.10`
wEDS1066RelayFunction Relay function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.6.1.11`
wEDS1066LEDSetState LED set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.6.1.12`
wEDS1066RelaySetState Relay set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.6.1.13`

wEDS1065Table

table

.1.3.6.1.4.1.31440.11.7 · 1 row entry · 16 columns

Open in standard view

Table for EDS1065 device data (temperature, humidity, barometric pressure and light).

wEDS1065Entry entry .1.3.6.1.4.1.31440.11.7.1

Indexes

wDeviceIndex

Column	Syntax	OID
wEDS1065Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.7.1.1`
wEDS1065Humidity Humidity.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.7.1.2`
wEDS1065DewPoint DewPoint.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.7.1.3`
wEDS1065Humidex Humidex.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.7.1.4`
wEDS1065HeatIndex Heat Index.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.7.1.5`
wEDS1065LEDState LED state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.7.1.6`
wEDS1065RelayState Relay state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.7.1.7`
wEDS1065Input1 Input 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.7.1.8`
wEDS1065ActivityLatch1 Activity latch 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.7.1.9`
wEDS1065PulseCounter1 Pulse counter 1.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.7.1.10`
wEDS1065Battery Battery voltage.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.7.1.11`
wEDS1065ReadCounter Read counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.7.1.12`
wEDS1065LEDFunction LED function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.7.1.13`
wEDS1065RelayFunction Relay function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.7.1.14`
wEDS1065LEDSetState LED set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.7.1.15`
wEDS1065RelaySetState Relay set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.7.1.16`

wEDS1064Table

table

.1.3.6.1.4.1.31440.11.8 · 1 row entry · 12 columns

Open in standard view

Table for EDS1064 device data (temperature, humidity, barometric pressure and light).

wEDS1064Entry entry .1.3.6.1.4.1.31440.11.8.1

Indexes

wDeviceIndex

Column	Syntax	OID
wEDS1064Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.8.1.1`
wEDS1064LEDState LED state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.8.1.2`
wEDS1064RelayState Relay state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.8.1.3`
wEDS1064Input1 Input 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.8.1.4`
wEDS1064ActivityLatch1 Activity latch 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.8.1.5`
wEDS1064PulseCounter1 Pulse counter 1.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.8.1.6`
wEDS1064Battery Battery voltage.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.8.1.7`
wEDS1064ReadCounter Read counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.8.1.8`
wEDS1064LEDFunction LED function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.8.1.9`
wEDS1064RelayFunction Relay function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.8.1.10`
wEDS1064LEDSetState LED set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.8.1.11`
wEDS1064RelaySetState Relay set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.8.1.12`

wEDS1101Table

table

.1.3.6.1.4.1.31440.11.9 · 1 row entry · 2 columns

Open in standard view

Table for EDS1101 device data (repeater).

wEDS1101Entry entry .1.3.6.1.4.1.31440.11.9.1

Indexes

wDeviceIndex

Column	Syntax	OID
wEDS1101DevicesConnected Number of devices connected.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.9.1.1`
wEDS1101SendCounter Send counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.9.1.2`

wEDS2101Table

table

.1.3.6.1.4.1.31440.11.10 · 1 row entry · 2 columns

Open in standard view

Table for EDS2101 device data (repeater).

wEDS2101Entry entry .1.3.6.1.4.1.31440.11.10.1

Indexes

wDeviceIndex

Column	Syntax	OID
wEDS2101DevicesConnected Number of devices connected.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.10.1.1`
wEDS2101SendCounter Send counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.10.1.2`

wEDS3030Table

table

.1.3.6.1.4.1.31440.11.11 · 1 row entry · 11 columns

Open in standard view

Table for EDS3030 device data (temperature, probe, light and input).

wEDS3030Entry entry .1.3.6.1.4.1.31440.11.11.1

Indexes

wDeviceIndex

Column	Syntax	OID
wEDS3030Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.11.1.1`
wEDS3030Probe Temperature probe.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.11.1.2`
wEDS3030LEDState LED state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.11.1.3`
wEDS3030Light Light.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.11.1.4`
wEDS3030Input1 Input 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.11.1.5`
wEDS3030ActivityLatch1 Activity latch 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.11.1.6`
wEDS3030PulseCounter1 Pulse counter 1.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.11.1.7`
wEDS3030Battery Battery voltage.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.11.1.8`
wEDS3030ReadCounter Read counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.11.1.9`
wEDS3030LEDFunction LED function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.11.1.10`
wEDS3030LEDSetState LED set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.11.1.11`

wEDS3031Table

table

.1.3.6.1.4.1.31440.11.12 · 1 row entry · 10 columns

Open in standard view

Table for EDS3031 device data (temperature and RTD).

wEDS3031Entry entry .1.3.6.1.4.1.31440.11.12.1

Indexes

wDeviceIndex

Column	Syntax	OID
wEDS3031Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.12.1.1`
wEDS3031RTDTemperature RTD Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.12.1.2`
wEDS3031LEDState LED state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.12.1.3`
wEDS3031Input1 Input 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.12.1.4`
wEDS3031ActivityLatch1 Activity latch 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.12.1.5`
wEDS3031PulseCounter1 Pulse counter 1.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.12.1.6`
wEDS3031Battery Battery voltage.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.12.1.7`
wEDS3031ReadCounter Read counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.12.1.8`
wEDS3031LEDFunction LED function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.12.1.9`
wEDS3031LEDSetState LED set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.12.1.10`

wEDS3032Table

table

.1.3.6.1.4.1.31440.11.13 · 1 row entry · 11 columns

Open in standard view

Table for EDS3032 device data (temperature and dual RTD).

wEDS3032Entry entry .1.3.6.1.4.1.31440.11.13.1

Indexes

wDeviceIndex

Column	Syntax	OID
wEDS3032Temperature Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.13.1.1`
wEDS3032RTD1Temperature RTD 1 Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.13.1.2`
wEDS3032RTD2Temperature RTD 2 Temperature.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.13.1.3`
wEDS3032LEDState LED state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.13.1.4`
wEDS3032Input1 Input 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.13.1.5`
wEDS3032ActivityLatch1 Activity latch 1 state.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.13.1.6`
wEDS3032PulseCounter1 Pulse counter 1.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.13.1.7`
wEDS3032Battery Battery voltage.	RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.31440.11.13.1.8`
wEDS3032ReadCounter Read counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.31440.11.13.1.9`
wEDS3032LEDFunction LED function.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.13.1.10`
wEDS3032LEDSetState LED set state.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31440.11.13.1.11`