owDS2450ChannelBConversionResolution
EDS3030-MIB ·
.1.3.6.1.4.1.31440.10.10.1.7
Object
column
r/w
Integer32
Conversion resolution of the channel. Can be set between 1 and 16.
Context
- MIB
- EDS3030-MIB
- OID
.1.3.6.1.4.1.31440.10.10.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- owDS2450Entry
- Table
- owDS2450Table
- Siblings
- 21
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| owDS2450ChannelAConversionValue Conversion value of the channel, in volts. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.31440.10.10.1.1 |
| owDS2450ChannelBOutputControl Set to low (0) to turn on the output transistor. Has
no effect if ChannelXOutputEnable is low (0). | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.10 |
| owDS2450ChannelCConversionValue Conversion value of the channel, in volts. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.31440.10.10.1.11 |
| owDS2450ChannelCConversionResolution Conversion resolution of the channel. Can be set
between 1 and 16. | column | Integer32 | .1.3.6.1.4.1.31440.10.10.1.12 |
| owDS2450ChannelCConversionRange If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55. | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.13 |
| owDS2450ChannelCOutputEnable A setting of 1 enables the output transistor, use
ChannelXOutputControl to turn the transistor on / off. | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.14 |
| owDS2450ChannelCOutputControl Set to low (0) to turn on the output transistor. Has
no effect if ChannelXOutputEnable is low (0). | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.15 |
| owDS2450ChannelDConversionValue Conversion value of the channel, in volts. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.31440.10.10.1.16 |
| owDS2450ChannelDConversionResolution Conversion resolution of the channel. Can be set
between 1 and 16. | column | Integer32 | .1.3.6.1.4.1.31440.10.10.1.17 |
| owDS2450ChannelDConversionRange If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55. | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.18 |
| owDS2450ChannelDOutputEnable A setting of 1 enables the output transistor, use
ChannelXOutputControl to turn the transistor on / off. | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.19 |
| owDS2450ChannelAConversionResolution Conversion resolution of the channel. Can be set
between 1 and 16. | column | Integer32 | .1.3.6.1.4.1.31440.10.10.1.2 |
| owDS2450ChannelDOutputControl Set to low (0) to turn on the output transistor. Has
no effect if ChannelXOutputEnable is low (0). | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.20 |
| owDS2450PowerOnReset Set high (1) with a power on reset. Reset
by writing any value. | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.21 |
| owDS2450VCCControl Set high (1) if the VCC pin is connected to power,
set low (0) otherwise. | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.22 |
| owDS2450ChannelAConversionRange If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55. | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.3 |
| owDS2450ChannelAOutputEnable A setting of 1 enables the output transistor, use
ChannelXOutputControl to turn the transistor on / off. | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.4 |
| owDS2450ChannelAOutputControl Set to low (0) to turn on the output transistor. Has
no effect if ChannelXOutputEnable is low (0). | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.5 |
| owDS2450ChannelBConversionValue Conversion value of the channel, in volts. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.31440.10.10.1.6 |
| owDS2450ChannelBConversionRange If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55. | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.8 |
| owDS2450ChannelBOutputEnable A setting of 1 enables the output transistor, use
ChannelXOutputControl to turn the transistor on / off. | column | Enumeration | .1.3.6.1.4.1.31440.10.10.1.9 |