owDS2450ChannelBConversionRange

EDS3030-MIB · .1.3.6.1.4.1.31440.10.10.1.8
MIB view Table view

Object

column r/w Enumeration 
If high (1), the maximum voltage that can be
measured is 5.10, low (0) sets the maximum voltage
to 2.55.

Context

MIB
EDS3030-MIB
OID
.1.3.6.1.4.1.31440.10.10.1.8
Type
column
Access
readwrite
Status
current
Parent
owDS2450Entry
Table
owDS2450Table
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
0low
1high

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
owDS2450ChannelAConversionValue
Conversion value of the channel, in volts.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.31440.10.10.1.1
owDS2450ChannelBOutputControl
Set to low (0) to turn on the output transistor. Has no effect if ChannelXOutputEnable is low (0).
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.10
owDS2450ChannelCConversionValue
Conversion value of the channel, in volts.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.31440.10.10.1.11
owDS2450ChannelCConversionResolution
Conversion resolution of the channel. Can be set between 1 and 16.
columnInteger32.1.3.6.1.4.1.31440.10.10.1.12
owDS2450ChannelCConversionRange
If high (1), the maximum voltage that can be measured is 5.10, low (0) sets the maximum voltage to 2.55.
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.13
owDS2450ChannelCOutputEnable
A setting of 1 enables the output transistor, use ChannelXOutputControl to turn the transistor on / off.
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.14
owDS2450ChannelCOutputControl
Set to low (0) to turn on the output transistor. Has no effect if ChannelXOutputEnable is low (0).
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.15
owDS2450ChannelDConversionValue
Conversion value of the channel, in volts.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.31440.10.10.1.16
owDS2450ChannelDConversionResolution
Conversion resolution of the channel. Can be set between 1 and 16.
columnInteger32.1.3.6.1.4.1.31440.10.10.1.17
owDS2450ChannelDConversionRange
If high (1), the maximum voltage that can be measured is 5.10, low (0) sets the maximum voltage to 2.55.
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.18
owDS2450ChannelDOutputEnable
A setting of 1 enables the output transistor, use ChannelXOutputControl to turn the transistor on / off.
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.19
owDS2450ChannelAConversionResolution
Conversion resolution of the channel. Can be set between 1 and 16.
columnInteger32.1.3.6.1.4.1.31440.10.10.1.2
owDS2450ChannelDOutputControl
Set to low (0) to turn on the output transistor. Has no effect if ChannelXOutputEnable is low (0).
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.20
owDS2450PowerOnReset
Set high (1) with a power on reset. Reset by writing any value.
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.21
owDS2450VCCControl
Set high (1) if the VCC pin is connected to power, set low (0) otherwise.
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.22
owDS2450ChannelAConversionRange
If high (1), the maximum voltage that can be measured is 5.10, low (0) sets the maximum voltage to 2.55.
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.3
owDS2450ChannelAOutputEnable
A setting of 1 enables the output transistor, use ChannelXOutputControl to turn the transistor on / off.
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.4
owDS2450ChannelAOutputControl
Set to low (0) to turn on the output transistor. Has no effect if ChannelXOutputEnable is low (0).
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.5
owDS2450ChannelBConversionValue
Conversion value of the channel, in volts.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.31440.10.10.1.6
owDS2450ChannelBConversionResolution
Conversion resolution of the channel. Can be set between 1 and 16.
columnInteger32.1.3.6.1.4.1.31440.10.10.1.7
owDS2450ChannelBOutputEnable
A setting of 1 enables the output transistor, use ChannelXOutputControl to turn the transistor on / off.
columnEnumeration.1.3.6.1.4.1.31440.10.10.1.9