DKSF-PWR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
65

npRelayTable

table
.1.3.6.1.4.1.25728.5500.5 · 1 row entry · 7 columns
Open in standard view 
Watchdog and outlet/relay control table
npRelayEntry entry .1.3.6.1.4.1.25728.5500.5.1
Relay/outlet table row
Indexes
npRelayN
Column Syntax OID
npRelayN
The N of output relay
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.25728.5500.5.1.1
npRelayMode
Control of relay:
-1 - flip between on(1) and off(0)
0 - manual off
1 - manual on
2 - watchdog
3 - schedule
4 - both schedule and watchdog (while switched on by schedule)
5 - logic
Enumerationr/w
Enumerated Values:
-1flip
0off
1on
2watchdog
3schedule
4scheduleAndWatchdog
5logic
 .1.3.6.1.4.1.25728.5500.5.1.2
npRelayStartReset
Write 1 to start reset (switch relay off for some time)
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.5500.5.1.3
npRelayMemo
Relay memo
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25728.5500.5.1.6
npRelayFlip
Write -1 to flip between manual on and manual off states of relay
Enumerationr/w
Enumerated Values:
-1flip
 .1.3.6.1.4.1.25728.5500.5.1.14
npRelayState
Actual relay state at the moment,
regardless of source of control.
0 - relay is off
1 - relay is on
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.25728.5500.5.1.15
npRelayPowered
AC presence on output (relay operation check)
0 - no AC on output socket
1 - AC is present on oputput
Enumeration
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.25728.5500.5.1.16

npPwrTable

table
.1.3.6.1.4.1.25728.5800.3 · 1 row entry · 8 columns
Open in standard view 
Watchdog and outlet/relay control table
npPwrEntry entry .1.3.6.1.4.1.25728.5800.3.1
Watchdog control table row
Indexes
npPwrChannelN
Column Syntax OID
npPwrChannelN
The id of watchdog/power channel
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.25728.5800.3.1.1
npPwrStartReset obsolete
Deprecated in current FW version: Write 1 to start forced reset.
On read:
0 - normal operation
1 - reset is active
2 - reboot pause is active or watchdog is inactive
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.25728.5800.3.1.2
npPwrManualMode
Mode of power channel
0 - manual off
1 - manual on
2 - watchdog
3 - schedule
4 - schedule and watchdog
5 - controlled by Logic
Enumerationr/w
Enumerated Values:
0off
1on
2watchdog
3schedule
4scheduleAndWatchdog
5logic
 .1.3.6.1.4.1.25728.5800.3.1.3
npPwrResetsCounter
Counter of watchdog resets
Write 0 to clear.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25728.5800.3.1.4
npPwrRepeatingResetsCounter
Counter of continous failed
watchdog resets
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25728.5800.3.1.5
npPwrMemo
Watchdog channel memo
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25728.5800.3.1.6
npPwrRelayFlip
Write -1 to flip between manual on and manual off states of relay
Enumerationr/w
Enumerated Values:
-1flip
 .1.3.6.1.4.1.25728.5800.3.1.14
npPwrRelayState
Actual relay state at the moment,
regardless of source of control.
0 - relay is off
1 - relay is on
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.25728.5800.3.1.15

npInputAnalogTable

table
.1.3.6.1.4.1.25728.8200.1 · 1 row entry · 12 columns
Open in standard view 
1Wire Current Loop Adapters Table
npInputAnalogEntry entry .1.3.6.1.4.1.25728.8200.1.1
1Wire Current Loop Adapters Table Row
Indexes
npInputAnalogSensorN
Column Syntax OID
npInputAnalogSensorN
The id of 1Wire Current Loop Adapter, 1 to 5
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.25728.8200.1.1.1
npInputAnalogStatus
Status of Current Loop Signal,
failure1w = no reply from the adapter on 1wire bus,
failureAnalog = signal is beyond it's Working Range,
belowSafe, safe, aboveSafe - status of the signal
relative to the Safe Range margi…
Enumeration
Enumerated Values:
0failure1w
1belowSafe
2safe
3aboveSafe
5failureAnalog
 .1.3.6.1.4.1.25728.8200.1.1.2
npInputAnalogCurrent
Current via RS_P, RS_N contacts of Current Loop
Adapter, uA (microamperes)
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.3
npInputAnalogVoltage
Voltage on RS_P contact of Current Loop
Adapter Vs Ground, mV
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.4
npInputAnalogResistance
Resistance of the Current Loop, Ohm
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25728.8200.1.1.5
npInputAnalogMemo
Current Loop memo, what's connected
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25728.8200.1.1.6
npInputAnalogPower
Controls power on Current Loop Adapter outputs +24V, +12V
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.25728.8200.1.1.7
npInputAnalogReset
Write duration 1..25s to temporary switch off
+12V, +24V outputs to reset sensor on the
current loop by cycling it's power
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.8
npInputAnalogWorkRangeHigh
Top marging of Working Range, uA or mV or Ohm.
If monitored value is outide of Working Range, Analog Failure take place.
If not specified, value is -32768
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.11
npInputAnalogSafeRangeHigh
Top marging of Safe Range, uA or mV or Ohm.
If not specified, value is -32768
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.12
npInputAnalogSafeRangeLow
Bottom marging of Safe Range, uA or mV or Ohm.
If not specified, value is -32768
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.13
npInputAnalogWorkRangeLow
Bottom marging of Working Range, uA or mV or Ohm.
If monitored value is outide of Working Range, Analog Failure take place.
If not specified, value is -32768
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.14

npRelHumTable

table
.1.3.6.1.4.1.25728.8400.1 · 1 row entry · 10 columns
Open in standard view 
Humidity+Temperature Sensors Table
npRelHumEntry entry .1.3.6.1.4.1.25728.8400.1.1
Humidity+Temperature Sensors Table Row
Indexes
npRelHumN
Column Syntax OID
npRelHumN
Index of Humidity+Temperature sensor, 1 to max supported
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.25728.8400.1.1.1
npRelHumValue
Relative humidity value, %
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25728.8400.1.1.2
npRelHumStatus
Status of Relative Humiduty
Enumeration
Enumerated Values:
0sensorFailed
1belowSafeRange
2inSafeRange
3aboveSafeRange
 .1.3.6.1.4.1.25728.8400.1.1.3
npRelHumTempValue
Sensor temperature, deg.C
Integer32
Constraints:
range: -60-200
 .1.3.6.1.4.1.25728.8400.1.1.4
npRelHumTempStatus
Status of Relative Humiduty
Enumeration
Enumerated Values:
0sensorFailed
1belowSafeRange
2inSafeRange
3aboveSafeRange
 .1.3.6.1.4.1.25728.8400.1.1.5
npRelHumMemo
Sensor Memo/Location
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25728.8400.1.1.6
npRelHumSafeRangeHigh
Relative Humidity safe range, top margin, %RH
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25728.8400.1.1.7
npRelHumSafeRangeLow
Relative Humidity safe range, bottom margin, %RH
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25728.8400.1.1.8
npRelHumTempSafeRangeHigh
Temperature safe range, top margin, deg.C
Integer32
Constraints:
range: -55-150
 .1.3.6.1.4.1.25728.8400.1.1.9
npRelHumTempSafeRangeLow
Temperature safe range, bottom margin, deg.C
Integer32
Constraints:
range: -55-150
 .1.3.6.1.4.1.25728.8400.1.1.10

npThermoTable

table
.1.3.6.1.4.1.25728.8800.1 · 1 row entry · 7 columns
Open in standard view 
Thermo Sensors Table
npThermoEntry entry .1.3.6.1.4.1.25728.8800.1.1
Thermo Sensors Table Row
Indexes
npThermoSensorN
Column Syntax OID
npThermoSensorN
The id of temperature sensor, 1 to 8
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.25728.8800.1.1.1
npThermoValue
Temperature, deg.C
Integer32
Constraints:
range: -60-280
 .1.3.6.1.4.1.25728.8800.1.1.2
npThermoStatus
Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
Enumeration
Enumerated Values:
0failed
1low
2norm
3high
 .1.3.6.1.4.1.25728.8800.1.1.3
npThermoLow
Bottom margin of normal temperature range, deg.C
Integer32
Constraints:
range: -60-280
 .1.3.6.1.4.1.25728.8800.1.1.4
npThermoHigh
Top margin of normal temperature range, deg.C
Integer32
Constraints:
range: -60-280
 .1.3.6.1.4.1.25728.8800.1.1.5
npThermoMemo
T channel memo
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25728.8800.1.1.6
npThermoValuePrecise
Temperature, deg.C, with fractional part 3 digits after point
FixedPoint1000
Textual Convention: FixedPoint1000 Integer32
 .1.3.6.1.4.1.25728.8800.1.1.7

npIoTable

table
.1.3.6.1.4.1.25728.8900.1 · 1 row entry · 7 columns
Open in standard view 
Digital Input/output Table
npIoEntry entry .1.3.6.1.4.1.25728.8900.1.1
Digital Input/output Table Row
Indexes
npIoLineN
Column Syntax OID
npIoLineN
Number of IO line, from 1 to max supported
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.25728.8900.1.1.1
npIoLevelIn
Input level, 0 or 1
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.25728.8900.1.1.2
npIoLevelOut
Output level, 0 or 1.
Write -1 to flip output.
Enumerationr/w
Enumerated Values:
-1flip
0low
1high
 .1.3.6.1.4.1.25728.8900.1.1.3
npIoMemo
IO line memo
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25728.8900.1.1.6
npIoPulseCounter
Pulse Counter on IO input line (counts positive fronts)
Write 0 to reset.
SNMPv2-SMICounter32r/w
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25728.8900.1.1.9
npIoSinglePulseDuration
Set duration of single pulse on IO output line,
100ms to 25500ms, min. step is 100ms
Integer32r/w
Constraints:
range: 100-25500
 .1.3.6.1.4.1.25728.8900.1.1.12
npIoSinglePulseStart
Write 1 to start single pulse on IO output.
Output will be inverted for time, specified by npIoSinglePulseDuration
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8900.1.1.13

npVoltageTable

table
.1.3.6.1.4.1.25728.9000.1 · 1 row entry · 14 columns
Open in standard view 
Voltage Monitoring Sensors Table
npVoltageEntry entry .1.3.6.1.4.1.25728.9000.1.1
Voltage Monitoring Sensors Table Row
Indexes
npVoltageN
Column Syntax OID
npVoltageN
The ID of Voltage Monitoring sensor, 1 to 3
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.25728.9000.1.1.1
npVoltageRMS
Voltage value, V
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.25728.9000.1.1.2
npVoltageStatus
Status of voltage
Enumeration
Enumerated Values:
0sensorFailed
1noVoltage
2bad
3warn
4good
 .1.3.6.1.4.1.25728.9000.1.1.3
npVoltageFreq
Frequency value in units of .01 Hz
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.25728.9000.1.1.4
npVoltageFreqStatus
Status of frequency
Enumeration
Enumerated Values:
0sensorFailed
1noVoltage
2bad
3warn
4good
 .1.3.6.1.4.1.25728.9000.1.1.5
npVoltageMemo
Voltage Monitoring sensor memo
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25728.9000.1.1.6
npVoltageSagCounter
Counter of voltage sags
SNMPv2-SMICounter32r/w
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25728.9000.1.1.10
npVoltageSagStatus
Status of voltage sag
Enumeration
Enumerated Values:
0sensorFailed
1noVoltage
2high
3medium
4small
5noSags
 .1.3.6.1.4.1.25728.9000.1.1.11
npVoltageLowerNoneStatus
The lower margin of NoSags status of voltage sag, %
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.25728.9000.1.1.12
npVoltageLowerSmallStatus
The lower margin of Small status of voltage sag, %
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.25728.9000.1.1.13
npVoltageLowerMediumStatus
The lower margin of Medium status of voltage sag, %
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.25728.9000.1.1.14
npVoltageStandard
Nominal voltage, V
Integer32r/w
Constraints:
range: 100-240
 .1.3.6.1.4.1.25728.9000.1.1.20
npVoltagePeak
Peak voltage, V
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.25728.9000.1.1.30
npVoltagePeakStatus
Status of peak voltage
Enumeration
Enumerated Values:
0sensorFailed
1noVoltage
2dangerous
3noPeaks
 .1.3.6.1.4.1.25728.9000.1.1.31