DES3200ME-28-L2MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
31
Rows
31
Columns
126

swL2DevCtrlCFMPortTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.1.2.29.2 · 1 row entry · 2 columns
Open in standard view 
A table containing the CFM state of specified ports.
swL2DevCtrlCFMPortEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.1.2.29.2.1
The entry of the CFM state on specified ports.
Indexes
swL2DevCtrlCFMPortIndex
Column Syntax OID
swL2DevCtrlCFMPortIndex
This object indicates the port number.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.1.6.2.1.2.29.2.1.1
swL2DevCtrlCFMPortState
This object indicates the CFM state by port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.1.6.2.1.2.29.2.1.2

swL2PortInfoTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.2.1 · 1 row entry · 5 columns
Open in standard view 
A table that contains information about every port.
swL2PortInfoEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.2.1.1
A list of information for each port of the device.
Indexes
swL2PortInfoPortIndex swL2PortInfoMediumType
Column Syntax OID
swL2PortInfoPortIndex
This object indicates the module's port number.(1..Max port number in
the module)
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.11.113.1.6.2.2.1.1.1
swL2PortInfoMediumType
This object indicates the port type: fiber or copper.
Enumeration
Enumerated Values:
100copper
101fiber
 .1.3.6.1.4.1.171.11.113.1.6.2.2.1.1.2
swL2PortInfoLinkStatus
This object indicates the port link status.
Enumeration
Enumerated Values:
1other
2link-pass
3link-fail
 .1.3.6.1.4.1.171.11.113.1.6.2.2.1.1.4
swL2PortInfoNwayStatus
This object indicates the port speed and duplex mode.
Enumeration
Enumerated Values:
1auto
2half-10Mbps
3full-10Mbps
4half-100Mbps
5full-100Mbps
7full-1Gigabps
 .1.3.6.1.4.1.171.11.113.1.6.2.2.1.1.5
swL2PortInfoFlowCtrlOperStatus
The current operational state of flow control. The none (1) state
indicates that no flow control is performed. The flow control
mechanism is different between full duplex mode and half duplex
mode. For full duplex mode,…
Enumeration
Enumerated Values:
1none
2ieee8023x
3backPressure
 .1.3.6.1.4.1.171.11.113.1.6.2.2.1.1.10

swL2PortCtrlTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.2.2 · 1 row entry · 10 columns
Open in standard view 
A table that contains control information about every port.
swL2PortCtrlEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.2.2.1
A list of control information for each port of the device.
Indexes
swL2PortCtrlPortIndex swL2PortCtrlPortMediumType
Column Syntax OID
swL2PortCtrlPortIndex
This object indicates the module's port number.(1..Max port number in
the module)
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.11.113.1.6.2.2.2.1.1
swL2PortCtrlPortMediumType
This object indicates the port type: fiber or copper.
Enumeration
Enumerated Values:
100copper
101fiber
 .1.3.6.1.4.1.171.11.113.1.6.2.2.2.1.2
swL2PortCtrlAdminState
This object decides whether the port is enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.1.6.2.2.2.1.3
swL2PortCtrlNwayState
Choose the port speed, duplex mode, and N-Way function mode.
Enumerationr/w
Enumerated Values:
1nway-auto
2nway-disabled-10Mbps-Half
3nway-disabled-10Mbps-Full
4nway-disabled-100Mbps-Half
5nway-disabled-100Mbps-Full
7nway-disabled-1Gigabps-Full
8nway-disabled-1Gigabps-Full-Master
9nway-disabled-1Gigabps-Full-Slave
 .1.3.6.1.4.1.171.11.113.1.6.2.2.2.1.4
swL2PortCtrlFlowCtrlState
Set the flow control function as enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.1.6.2.2.2.1.5
swL2PortCtrlDescription
The object describes the ports in text.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.113.1.6.2.2.2.1.6
swL2PortCtrlAddressLearning
This object decides whether the address learning is enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.1.6.2.2.2.1.7
swL2PortCtrlMACNotifyState
This object sets each port's MAC notification state.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.1.6.2.2.2.1.8
swL2PortCtrlMulticastfilter
This object decides the multicast packet filtering mode on this port.
Enumerationr/w
Enumerated Values:
2forward-unregistered-groups
3filter-unregistered-groups
 .1.3.6.1.4.1.171.11.113.1.6.2.2.2.1.9
swL2PortCtrlMDIXState
This object configures the MDIX setting of the port.
The value 'other' is for those entries in which MDIX is not applicable.
Enumerationr/w
Enumerated Values:
1auto
2normal
3cross
4other
 .1.3.6.1.4.1.171.11.113.1.6.2.2.2.1.10

swL2PortErrTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.2.3 · 1 row entry · 5 columns
Open in standard view 
A table that contains information about the Err port.
swL2PortErrEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.2.3.1
A list of information for the err port of the device.
Indexes
swL2PortErrPortIndex
Column Syntax OID
swL2PortErrPortIndex
This object indicates the module's port number.(1..Max port number in
the module)
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.11.113.1.6.2.2.3.1.1
swL2PortErrPortState
This object decides whether the port state is enabled or disabled.
Enumeration
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.171.11.113.1.6.2.2.3.1.2
swL2PortErrPortStatus
This object decides whether the PortStatus is err-disabled.
Enumeration
Enumerated Values:
1other
2err-disabled
 .1.3.6.1.4.1.171.11.113.1.6.2.2.3.1.3
swL2PortErrPortReason
This object decides whether the PortStatus STP is LBD or Storm control.
Enumeration
Enumerated Values:
0none
1stp-lbd
2storm-control
3storm-control-lbd
4loopdetect
 .1.3.6.1.4.1.171.11.113.1.6.2.2.3.1.4
swL2PortErrDescription
The object describes the ports in text.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.113.1.6.2.2.3.1.5

swL2QOSBandwidthControlTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.3.1 · 1 row entry · 5 columns
Open in standard view 
.
swL2QOSBandwidthControlEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.3.1.1
A list of information contained in swL2QOSBandwidthControlTable.
Indexes
swL2QOSBandwidthPortIndex
Column Syntax OID
swL2QOSBandwidthPortIndex
Indicates the port.
Integer32
Constraints:
range: 1-650
 .1.3.6.1.4.1.171.11.113.1.6.2.3.1.1.1
swL2QOSBandwidthRxRate
Indicates the RX Rate(Kbit/sec) of the specified port. A value of 1024000 means no limit.
Integer32r/w
Constraints:
range: 64-1024000
 .1.3.6.1.4.1.171.11.113.1.6.2.3.1.1.2
swL2QOSBandwidthTxRate
Indicates the TX Rate(Kbit/sec) of the specified port. A value of 1024000 means no limit.
Integer32r/w
Constraints:
range: 64-1024000
 .1.3.6.1.4.1.171.11.113.1.6.2.3.1.1.3
swL2QOSBandwidthRadiusRxRate
The Rx Rate value comes from the RADIUS server,
If an 802.1X port is authenticated, this value
will overwrite the locally configured Rx Rate.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.1.6.2.3.1.1.4
swL2QOSBandwidthRadiusTxRate
The Tx Rate value comes from the RADIUS server,
If an 802.1X port is authenticated, this value
will overwrite the locally configured Tx Rate.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.1.6.2.3.1.1.5

swL2QOSSchedulingTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.3.2 · 1 row entry · 3 columns
Open in standard view 
.
swL2QOSSchedulingEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.3.2.1
A list of information contained in the swL2QOSSchedulingTable.
Indexes
swL2QOSSchedulingClassIndex
Column Syntax OID
swL2QOSSchedulingClassIndex
Indicates the hardware queue number.
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.171.11.113.1.6.2.3.2.1.1
swL2QOSSchedulingMaxWeight
Indicates the maximum number of packets the above specified hardware
priority queue will be allowed to transmit before allowing
the next lowest priority queue to transmit its packets.
Integer32r/w
Constraints:
range: 1-55
 .1.3.6.1.4.1.171.11.113.1.6.2.3.2.1.4
swL2QOSSchedulingMechanism
Indicates the mechanism of QOS scheduling.
Enumeration
Enumerated Values:
1strict
2roundrobin
3weightfair
 .1.3.6.1.4.1.171.11.113.1.6.2.3.2.1.5

swL2QOS8021pUserPriorityTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.3.3 · 1 row entry · 2 columns
Open in standard view 
.
swL2QOS8021pUserPriorityEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.3.3.1
A list of information contained in the swL2QOS8021pUserPriorityTable.
Indexes
swL2QOS8021pUserPriorityIndex
Column Syntax OID
swL2QOS8021pUserPriorityIndex
The 802.1p user priority.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.11.113.1.6.2.3.3.1.1
swL2QOS8021pUserPriorityClass
The number of the switch's hardware priority queue. The switch has four hardware
priority queues available. They are numbered between 0 (the lowest priority)
and 3 (the highest priority).
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.171.11.113.1.6.2.3.3.1.2

swL2QOS8021pDefaultPriorityTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.3.4 · 1 row entry · 3 columns
Open in standard view 
.
swL2QOS8021pDefaultPriorityEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.3.4.1
A list of information contained in the swL2QOS8021pDefaultPriorityTable.
Indexes
swL2QOS8021pDefaultPriorityIndex
Column Syntax OID
swL2QOS8021pDefaultPriorityIndex
Indicates the port number.
Integer32
Constraints:
range: 1-650
 .1.3.6.1.4.1.171.11.113.1.6.2.3.4.1.1
swL2QOS8021pDefaultPriority
The priority value to assign to untagged packets received by the
switch ports on the switch.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.11.113.1.6.2.3.4.1.2
swL2QOS8021pRadiusPriority
Indicates the value of 802.1p comes from RADIUS server.
If an 802.1X port is authenticated,
this value will overwrite the local configured value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.1.6.2.3.4.1.3

swPortTrunkTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.4.3 · 1 row entry · 7 columns
Open in standard view 
This table specifies the port membership for each logical link.
swPortTrunkEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.4.3.1
A list of information that specifies which port group forms
a single logical link.
Indexes
swPortTrunkIndex
Column Syntax OID
swPortTrunkIndex
The index of logical port trunk.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.171.11.113.1.6.2.4.3.1.1
swPortTrunkMasterPort
The object indicates the master port number of the port trunk entry. The
first port of the trunk is implicitly configured to be the master logical
port. When using a Port Trunk, you can not configure the other ports o…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.1.6.2.4.3.1.2
swPortTrunkPortList
Indicate member ports of a logical trunk.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.1.6.2.4.3.1.3
swPortTrunkType
This object indicates the type of this entry.
Enumerationr/w
Enumerated Values:
1static
2lacp
 .1.3.6.1.4.1.171.11.113.1.6.2.4.3.1.4
swPortTrunkActivePort
This object indicates the active ports of this entry.
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.1.6.2.4.3.1.5
swPortTrunkState
This object indicates the status of this entry.
when the state is CreatAndGo (4),the type of trunk is static (1);
when the state is CreatAndWait (5), the type of trunk is lacp(2).
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.113.1.6.2.4.3.1.6
swPortTrunkFloodingPort
The flooding port of every trunk.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.1.6.2.4.3.1.7

swL2TrunkLACPPortTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.4.5 · 1 row entry · 2 columns
Open in standard view 
This table specifies which port group a set of ports (up to 8)
is formed into a single logical link.
swL2TrunkLACPPortEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.4.5.1
A list of information specifies which port group a set of
ports (up to 8) is formed into a single logical link.
Indexes
swL2TrunkLACPPortIndex
Column Syntax OID
swL2TrunkLACPPortIndex
The index of the logical port LACP.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.1.6.2.4.5.1.1
swL2TrunkLACPPortState
The state of the logical port LACP.
Enumerationr/w
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.171.11.113.1.6.2.4.5.1.2

swL2TrunkVLANTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.4.6 · 1 row entry · 2 columns
Open in standard view 
This table is used to manage the VLAN trunking feature of the device.
swL2TrunkVLANEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.4.6.1
This object is used to configure the VLAN trunking settings for each port.
Indexes
swL2TrunkVLANPort
Column Syntax OID
swL2TrunkVLANPort
This object indicates the port being configured.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.1.6.2.4.6.1.1
swL2TrunkVLANState
The state of the logical port LACP.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.1.6.2.4.6.1.2

swL2IGMPCtrlTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.7.3 · 1 row entry · 10 columns
Open in standard view 
The table controls the VLAN's IGMP function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If the VLAN mode is disabled, there is only one entry in the table, with index 1. If 
VLAN is in Port-Based or 802.1q mode, the number of entries can 
be up to 12, with an index range from 1 to 12.
swL2IGMPCtrlEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1
An entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP captures the switch
(swL2DevCtrlIGMPSnooping) is enabled.
Indexes
swL2IGMPCtrlVid
Column Syntax OID
swL2IGMPCtrlVid
This object indicates the IGMP control entry's VLAN ID. If VLAN
is disabled, the VID is always 0 and cannot be changed by
management users. If VLAN is in Port-Based mode, the VID is
arranged from 1 to 12, fixed form. If…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.1
swL2IGMPQueryInterval
The frequency at which IGMP Host-Query packets are
transmitted on this switch.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.2
swL2IGMPMaxResponseTime
The maximum query response time on this switch.
Integer32r/w
Constraints:
range: 1-25
 .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.3
swL2IGMPRobustness
The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet losses.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.4
swL2IGMPLastMemberQueryInterval
The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages.
Integer32r/w
Constraints:
range: 1-25
 .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.5
swL2IGMPQueryState
This object decides if the IGMP query is enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.9
swL2IGMPCurrentState
This object indicates the current IGMP query state.
Enumeration
Enumerated Values:
1other
2querier
3non-querier
 .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.10
swL2IGMPCtrlState
This object indicates the status of this entry.

other (1) - This entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disable…
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
 .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.11
swL2IGMPFastLeave Enumerationr/w
Enumerated Values:
1other
2disable
3enable
 .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.12
swL2IGMPDynIPMultVlanAge
This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.14

swL2IGMPQueryInfoTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.7.4 · 1 row entry · 3 columns
Open in standard view 
The table contains the number of current IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device.
swL2IGMPQueryInfoEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.7.4.1
Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entry are all enabled.
Indexes
swL2IGMPInfoVid
Column Syntax OID
swL2IGMPInfoVid
This object indicates the VID of the associated IGMP info table
entry. It follows swL2IGMPCtrlVid in the associated entry of
IGMP control table (swL2IGMPCtrlTable).
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.1.6.2.7.4.1.1
swL2IGMPInfoQueryCount
This object indicates the number of query packets received
since the IGMP function enabled, on a per-VLAN basis.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.1.6.2.7.4.1.2
swL2IGMPInfoTxQueryCount
This object indicates the send count of IGMP query messages, on
a per-VLAN basis. In case of the IGMP timer expiring, the switch
sends IGMP query packets to related VLAN member ports and
increment this object by 1.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.1.6.2.7.4.1.3

swL2IGMPRouterPortTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.7.6 · 1 row entry · 5 columns
Open in standard view 
The information of the router port table.
swL2IGMPRouterPortEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.7.6.1
The entry of the swL2IGMPRouterPortTable.
Indexes
swL2IGMPRouterPortVlanid
Column Syntax OID
swL2IGMPRouterPortVlanid
This object indicates the VLAN ID of the router port entry.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.1.6.2.7.6.1.1
swL2IGMPRouterPortVlanName
This object indicates the VLAN name of the router port entry.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.113.1.6.2.7.6.1.2
swL2IGMPRouterPortStaticPortList
This object indicates the static portlist of the router port entry.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.1.6.2.7.6.1.3
swL2IGMPRouterPortDynamicPortList
This object indicates the dynamic portlist of the router port entry.
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.1.6.2.7.6.1.4
swL2IGMPRouterPortForbiddenPortList
This object indicates the forbidden portlist of the router port entry.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.1.6.2.7.6.1.5

swL2IGMPAccessAuthTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.7.7 · 1 row entry · 2 columns
Open in standard view 
This table is used to manage the IGMP Access Authentication 
configurations of the device.
swL2IGMPAccessAuthEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.7.7.1
A list of manageable entities for IGMP Access Authentication.
The configuration is done per port.
Indexes
swL2IGMPAccessAuthPort
Column Syntax OID
swL2IGMPAccessAuthPort
The index of the swL2IGMPAccessAuthTable.
This object corresponds to the port being configured.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.1.6.2.7.7.1.1
swL2IGMPAccessAuthState
This object denotes the status of IGMP Access Authentication of the port.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.171.11.113.1.6.2.7.7.1.2

swL2IGMPMulticastVlanTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.7.8 · 1 row entry · 11 columns
Open in standard view 
Information about the IGMP snooping multicast VLAN table.
swL2IGMPMulticastVlanEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.7.8.1
The entry of swL2IGMPMulticastVlanTable.
Indexes
swL2IGMPMulticastVlanid
Column Syntax OID
swL2IGMPMulticastVlanid
This object indicates the VLAN ID of the IGMP snooping multicast
VLAN entry.
Integer32
Constraints:
range: 2-4094
 .1.3.6.1.4.1.171.11.113.1.6.2.7.8.1.1
swL2IGMPMulticastVlanName
This object indicates the VLAN name of the IGMP snooping multicast
VLAN entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.113.1.6.2.7.8.1.2
swL2IGMPMulticastVlanSourcePort
This object indicates the port list of the source ports of the IGMP
snooping multicast VLAN. The source ports will be set as tag ports
of the VLAN entry and the IGMP control messages received from the
member ports wil…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.1.6.2.7.8.1.3
swL2IGMPMulticastVlanMemberPort
This object indicates the port list of the member ports of the IGMP
snooping multicast VLAN. The member ports will be set as untagged ports
of the VLAN entry and the IGMP control messages received from the
member ports…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.1.6.2.7.8.1.4
swL2IGMPMulticastVlanTagMemberPort
This object indicates the port list of the tag member ports of the IGMP
snooping multicast VLAN.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.1.6.2.7.8.1.5
swL2IGMPMulticastVlanState
This object can be used to enable or disable the IGMP snooping multicast VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.1.6.2.7.8.1.6
swL2IGMPMulticastVlanReplaceSourceIp
The replacement source IP of this multicast VLAN.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.1.6.2.7.8.1.7
swL2IGMPMulticastVlanRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.113.1.6.2.7.8.1.8
swL2IGMPMulticastVlanUntagSourcePort
This object indicates the port list of the untag source ports of the IGMP
snooping multicast VLAN.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.1.6.2.7.8.1.9
swL2IGMPMulticastVlanRemapPriority
This is the priority value (0 to 7) to be associated with the data traffic
to be forwarded on the multicast VLAN.
When set to -1, the packet's original priority will be used.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.11.113.1.6.2.7.8.1.10
swL2IGMPMulticastVlanReplacePriority
This specifies that a packet's priority will be changed by the switch
based on the remap priority. This flag will only take effect
when remap priority is set.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.1.6.2.7.8.1.11

swL2IGMPMulticastVlanGroupTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.7.9 · 1 row entry · 4 columns
Open in standard view 
The table containing the IGMP snooping multicast VLAN group information
swL2IGMPMulticastVlanGroupEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.7.9.1
Information about the current IGMP snooping multicast VLAN group.
Indexes
swL2IGMPMulticastVlanGroupVid swL2IGMPMulticastVlanGroupFromIp swL2IGMPMulticastVlanGroupToIp
Column Syntax OID
swL2IGMPMulticastVlanGroupVid
This object indicates the VID of the IGMP snooping multicast VLAN group.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.1.6.2.7.9.1.1
swL2IGMPMulticastVlanGroupFromIp
Specifies the multicast address list for this VLAN.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.1.6.2.7.9.1.2
swL2IGMPMulticastVlanGroupToIp
Specifies the multicast address list for this VLAN.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.1.6.2.7.9.1.3
swL2IGMPMulticastVlanGroupStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.113.1.6.2.7.9.1.4

swIGMPSnoopingHostTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.7.13 · 1 row entry · 4 columns
Open in standard view 
The table contains the IGMP hosts that have joined the groups.
swIGMPSnoopingHostEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.7.13.1
The entry contains the IGMP host that has joined the group.
Indexes
swIGMPSnoopingHostVid swIGMPSnoopingHostGroup swIGMPSnoopingHostPort swIGMPSnoopingHostIp
Column Syntax OID
swIGMPSnoopingHostVid
This object indicates the VID of the individual IGMP snooping host
table entry.
VlanId
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.11.113.1.6.2.7.13.1.1
swIGMPSnoopingHostGroup
This object indicates the group address of the individual IGMP
snooping host table entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.1.6.2.7.13.1.2
swIGMPSnoopingHostPort
This object indicates the port number of the individual IGMP
snooping host table entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.1.6.2.7.13.1.3
swIGMPSnoopingHostIp
This object indicates the host IP address of the individual IGMP
snooping host table entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.1.6.2.7.13.1.4

swL2TrafficSegTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.12.1 · 1 row entry · 2 columns
Open in standard view 
This table specifies the port just can forward traffic to the 
specific port list.
swL2TrafficSegEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.12.1.1
A list of information specifies the port with its traffic
forward list.
Indexes
swL2TrafficSegPort
Column Syntax OID
swL2TrafficSegPort
The port number of the logical port.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.1.6.2.12.1.1.1
swL2TrafficSegForwardPorts
The port list that the specific port can forward traffic.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.1.6.2.12.1.1.2

swL2PortSecurityControlTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.15.1 · 1 row entry · 5 columns
Open in standard view 
The port security feature controls the address leaning capability and the
traffic forwarding decision. Each port can have this function enabled or disabled.
When it is enabled and a number is given said N, which allows N addresses to be
learned at this port, the first N learned addresses are locked at this port as
a static entry. When the learned address number reaches N, any incoming packet without
learned source addresses are discarded (e.g. dropped) and no more new addresses
can be learned at this port.
swL2PortSecurityControlEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.15.1.1
A list of information contained in the swL2PortSecurityControlTable.
Indexes
swL2PortSecurityPortIndex
Column Syntax OID
swL2PortSecurityPortIndex
Indicates a secured port to lock address learning.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.11.113.1.6.2.15.1.1.1
swL2PortSecurityMaxLernAddr
Indicates the allowable number of addresses to be learned at this port.
Integer32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.171.11.113.1.6.2.15.1.1.2
swL2PortSecurityMode
Indicates the mode of locking address.
In deleteOnTimeout (3) mode - the locked addresses can be aged out after the aging timer
expires. In this mode, when the locked address is aged
out, the number of addresses that ca…
Enumerationr/w
Enumerated Values:
1other
2permanent
3deleteOnTimeout
4deleteOnReset
 .1.3.6.1.4.1.171.11.113.1.6.2.15.1.1.3
swL2PortSecurityAdmState
Indicates an administration state of locking address.
Enumerationr/w
Enumerated Values:
1other
2enable
3disable
 .1.3.6.1.4.1.171.11.113.1.6.2.15.1.1.4
swL2PortSecurityEntryClearCtrl
Used to clear port security entries by port.
Setting this value to 'start' will execute the clear action,
Once cleared, the value returns to 'other'.
Enumerationr/w
Enumerated Values:
1other
2start
 .1.3.6.1.4.1.171.11.113.1.6.2.15.1.1.5

swL2CosPriorityTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.17.3.1 · 1 row entry · 4 columns
Open in standard view 
Used to show and configure per port priority-based QoS features on the switch.
swL2CosPriorityEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.17.3.1.1
A list of information contained in the swL2CosPriorityTable.
Indexes
swL2CosPriorityPort
Column Syntax OID
swL2CosPriorityPort
The port number of CoS Priority.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.113.1.6.2.17.3.1.1.1
swL2CosPriorityEtherPRI
Enable Ethernet frame based priority.
When set ether8021p (2), enable 802.1p QoS; When set macBase (3), enable MAC-based QoS;
When set disable (1), disable Ethernet frame based priority.
Enumerationr/w
Enumerated Values:
1disable
2ether8021p
3macBase
 .1.3.6.1.4.1.171.11.113.1.6.2.17.3.1.1.3
swL2CosPriorityIpPRI
Enable IP priority QoS.
When set tos (2), enable TOS based QoS; When set dscp (3), enable DSCP based QoS;
When set disable (1), disable IP priority QoS.
Enumerationr/w
Enumerated Values:
1disable
2tos
3dscp
 .1.3.6.1.4.1.171.11.113.1.6.2.17.3.1.1.4
swL2CosPriorityNone
When read, it always returns invalid (2);
when write valid (1), it disables all priority in this table.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.171.11.113.1.6.2.17.3.1.1.5

swL2CosTosPRITable

table
.1.3.6.1.4.1.171.11.113.1.6.2.17.3.4 · 1 row entry · 2 columns
Open in standard view 
Used to show TOS value to traffic class mapping and
map the TOS value in the IP header of incoming packet to one of the four hardware queues available on the switch.
swL2CosTosPRIEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.17.3.4.1
A list of information contained in the swL2CosTosPRITable.
Indexes
swL2CosTosPRIIndex
Column Syntax OID
swL2CosTosPRIIndex
Indicates the CoS Priority TosPRI.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.11.113.1.6.2.17.3.4.1.1
swL2CosTosPRIClass
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available.
They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue).
If you want to set on…
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.171.11.113.1.6.2.17.3.4.1.2

swL2CosDscpPRITable

table
.1.3.6.1.4.1.171.11.113.1.6.2.17.3.5 · 1 row entry · 2 columns
Open in standard view 
Used to show DSCP value to traffic class mapping and
map the DSCP value in the IP header of incoming packet to one of the hardware queues available on the switch.
swL2CosDscpPRIEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.17.3.5.1
A list of information contained in the swL2CosDscpPRITable.
Indexes
swL2CosDscpPRIIndex
Column Syntax OID
swL2CosDscpPRIIndex
Indicates the CoS Priority DscpPRI.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.11.113.1.6.2.17.3.5.1.1
swL2CosDscpPRIClass
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available.
They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue).
If you want to set on…
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.171.11.113.1.6.2.17.3.5.1.2

swL2DhcpRelayCtrlTable

table obsolete
.1.3.6.1.4.1.171.11.113.1.6.2.18.7 · 1 row entry · 3 columns
Open in standard view 
This table specifies the IP address as a destination to forward
(relay) DHCP packets to.
swL2DhcpRelayCtrlEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.18.7.1
A list of information specifies the IP address as a destination
to forward (relay) DHCP packets to.
Indexes
swL2DhcpRelayCtrlInterfaceName swL2DhcpRelayCtrlServer
Column Syntax OID
swL2DhcpRelayCtrlInterfaceName obsolete
The name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.113.1.6.2.18.7.1.1
swL2DhcpRelayCtrlServer obsolete
The DHCP server IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.1.6.2.18.7.1.2
swL2DhcpRelayCtrlState obsolete
This object indicates the status of this entry.

other (1) - This entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid…
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
 .1.3.6.1.4.1.171.11.113.1.6.2.18.7.1.3

swL2LoopDetectPortTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.21.2.1 · 1 row entry · 4 columns
Open in standard view 
The table specifies the loopback detection function specified by port.
swL2LoopDetectPortEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.21.2.1.1
The table specifies the loopback detection function specified by port.
Indexes
swL2LoopDetectPortIndex
Column Syntax OID
swL2LoopDetectPortIndex
This object indicates the module's port number. The range is from 1 to
the maximum port number specified in the module
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.113.1.6.2.21.2.1.1.1
swL2LoopDetectPortState
This object indicates the loopback detection function state on the port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.1.6.2.21.2.1.1.2
swL2LoopDetectPortLoopVLAN
This object indicates the VLAN list that has detected a loopback.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.171.11.113.1.6.2.21.2.1.1.3
swL2LoopDetectPortLoopStatus
This object indicates the port status.
Enumeration
Enumerated Values:
1normal
2loop
3error
4none
 .1.3.6.1.4.1.171.11.113.1.6.2.21.2.1.1.4

swL2McastFilterTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.22.2 · 1 row entry · 5 columns
Open in standard view 
A table that contains information about the multicast filter address.
swL2McastFilterEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.22.2.1
A list of multicast filter mode information for each profile ID.
Indexes
swL2McastFilterProfileIndex
Column Syntax OID
swL2McastFilterProfileIndex
index for each profile
Integer32
Constraints:
range: 1-24
 .1.3.6.1.4.1.171.11.113.1.6.2.22.2.1.1
swL2McastFilterProfileName
The multicast filter description.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.11.113.1.6.2.22.2.1.2
swL2McastFilterAddOrDelState
The control multicast filter address.
Enumerationr/w
Enumerated Values:
1none
2add
3delete
 .1.3.6.1.4.1.171.11.113.1.6.2.22.2.1.3
swL2McastFilterGroupList
The multicast filter address group list.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.171.11.113.1.6.2.22.2.1.4
swL2McastFilterStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.113.1.6.2.22.2.1.5

swL2McastFilterPortTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.22.3 · 1 row entry · 4 columns
Open in standard view 
A table that is used to bind port to profile ID.
swL2McastFilterPortEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.22.3.1
A list of information that is used to bind port to profile ID.
Indexes
swL2McastFilterPortGroupPortIndex
Column Syntax OID
swL2McastFilterPortGroupPortIndex
The port index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.1.6.2.22.3.1.1
swL2McastFilterPortProfileAddOrDelState
The control multicast filter profile.
Enumerationr/w
Enumerated Values:
1none
2add
3delete
 .1.3.6.1.4.1.171.11.113.1.6.2.22.3.1.2
swL2McastFilterPortProfileID
This object indicates the profile ID of this entry.
When read, it is always 0.
When set, 0 can not be set.
Integer32r/w
Constraints:
range: 0-24
 .1.3.6.1.4.1.171.11.113.1.6.2.22.3.1.3
swL2McastFilterPortAccess
This object indicates the access status for each port.
When read, it is always none.
When set, none can not be set.
Enumerationr/w
Enumerated Values:
0none
1permit
2deny
 .1.3.6.1.4.1.171.11.113.1.6.2.22.3.1.4

swL2McastFilterPortMaxGroupTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.22.4 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the max group number based on port.
swL2McastFilterPortMaxGroupEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.22.4.1
A list of max group number information for each port.
Indexes
swL2McastFilterPortMaxGroupPortIndex
Column Syntax OID
swL2McastFilterPortMaxGroupPortIndex
The port index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.1.6.2.22.4.1.1
swL2McastFilterPortMaxGroup
The max group numbers. The default is 256.
Integer32r/w
Constraints:
range: 1-1024
 .1.3.6.1.4.1.171.11.113.1.6.2.22.4.1.2

swL2McastFilterPortInfoTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.22.5 · 1 row entry · 3 columns
Open in standard view 
A table that contains information about all of the multicast groups for the ports.
swL2McastFilterPortInfoEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.22.5.1
A list of information about all of the multicast groups for each port.
Indexes
swL2McastFilterPortInfoPortIndex
Column Syntax OID
swL2McastFilterPortInfoPortIndex
The port index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.1.6.2.22.5.1.1
swL2McastFilterPortInfoProfileID
The multicast filter address profile ID.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.171.11.113.1.6.2.22.5.1.2
swL2McastFilterPortInfoAccess
This object indicates the access status for each port.
Enumeration
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.171.11.113.1.6.2.22.5.1.3

swL2VlanAdvertisementTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.23.1 · 1 row entry · 3 columns
Open in standard view 
A table containing the advertisement state for each
VLAN configured into the device by (local or
network) management.
swL2VlanAdvertisementEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.23.1.1
The advertisement state for each VLAN configured
into the device.
Indexes
swL2VlanIndex
Column Syntax OID
swL2VlanIndex
The VLAN-ID or other identifier referring to this VLAN.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.1.6.2.23.1.1.1
swL2VlanName
An administratively assigned string, which may be used
to identify the VLAN.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.113.1.6.2.23.1.1.2
swL2VlanAdvertiseState
This object indicates the advertise status of this VLAN entry.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.1.6.2.23.1.1.3

swL2DhcpLocalRelayVLANTable

table
.1.3.6.1.4.1.171.11.113.1.6.2.24.2 · 1 row entry · 2 columns
Open in standard view 
This table is used to manage the DHCP local relay status 
for each VLAN.
swL2DhcpLocalRelayVLANEntry entry .1.3.6.1.4.1.171.11.113.1.6.2.24.2.1
This object lists the current VLANs in the switch and their
corresponding DHCP local relay status.
Indexes
swL2DhcpLocalRelayVLANID
Column Syntax OID
swL2DhcpLocalRelayVLANID
This object shows the VIDs of the current VLANS in the switch.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.1.6.2.24.2.1.1
swL2DhcpLocalRelayVLANState
This object indicates the status of the DHCP relay function
of the VLAN.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.1.6.2.24.2.1.2