swL2IGMPQueryState
DES3200ME-28-L2MGMT-MIB ·
.1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.9
Object
column
r/w
Enumeration
This object decides if the IGMP query is enabled or disabled.
Context
- MIB
- DES3200ME-28-L2MGMT-MIB
- OID
.1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swL2IGMPCtrlEntry
- Table
- swL2IGMPCtrlTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | disabled |
3 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swL2IGMPCtrlVid This object indicates the IGMP control entry's VLAN ID. If VLAN
is disabled, the VID is always 0 and cannot be changed by
management users. If VLAN is in Port-Based mode, the VID … | column | Integer32 | .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.1 |
| swL2IGMPCurrentState This object indicates the current IGMP query state. | column | Enumeration | .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.10 |
| swL2IGMPCtrlState This object indicates the status of this entry.
other (1) - This entry is currently in use but the conditions under
which it will remain so are different from e… | column | Enumeration | .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.11 |
| swL2IGMPFastLeave | column | Enumeration | .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.12 |
| swL2IGMPDynIPMultVlanAge This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN. | column | Enumeration | .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.14 |
| swL2IGMPQueryInterval The frequency at which IGMP Host-Query packets are
transmitted on this switch. | column | Integer32 | .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.2 |
| swL2IGMPMaxResponseTime The maximum query response time on this switch. | column | Integer32 | .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.3 |
| swL2IGMPRobustness The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (R… | column | Integer32 | .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.4 |
| swL2IGMPLastMemberQueryInterval The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group… | column | Integer32 | .1.3.6.1.4.1.171.11.113.1.6.2.7.3.1.5 |